Because of the limitations of electric vehicle(EV)battery technology and relevant supporting facilities,there is a great risk of breakdown of EVs during driving.The resulting driver“range anxiety”greatly affects the...Because of the limitations of electric vehicle(EV)battery technology and relevant supporting facilities,there is a great risk of breakdown of EVs during driving.The resulting driver“range anxiety”greatly affects the travel quality of EVs.These limitations should be overcome to promote the use of EVs.In this study,a method for travel path planning considering EV power supply was developed.First,based on real-time road conditions,a dynamic energy model of EVs was established considering the driving energy and accessory energy.Second,a multi-objective travel path planning model of EVs was constructed considering the power supply,taking the distance,time,energy,and charging cost as the optimization objectives.Finally,taking the actual traffic network of 15 km×15 km area in a city as the research object,the model was simulated and verified in MATLAB based on Dijkstra shortest path algorithm.The simulation results show that compared with the traditional route planning method,the total distance in the proposed optimal route planning method increased by 1.18%,but the energy consumption,charging cost,and driving time decreased by 11.62%,41.26%and 11.00%,respectively,thus effectively reducing the travel cost of EVs and improving the driving quality of EVs.展开更多
Several Constant False Alarm Rate （CFAR） architectures, where radar systems often employ them to automatically adapt the detection threshold to the local background noise or clutter power in an attempt to maintain a...Several Constant False Alarm Rate （CFAR） architectures, where radar systems often employ them to automatically adapt the detection threshold to the local background noise or clutter power in an attempt to maintain an approximately constant rate of false alarm, have been recently proposed to estimate the unknown noise power level. Since the Ordered-Statistics （OS） based algorithm has some advantages over the Cell-Averaging （CA） technique, we are concerned here with this type of CFAR detectors. The Linearly Combined Ordered-Statistic （LCOS） processor, which sets threshold by processing a weighted ordered range samples within finite moving window, may actually perform somewhat better than the conventional OS detector. Our objective in this paper is to analyze the LCOS processor along with the conventional OS scheme for the case where the radar receiver incorporates a postdetection integrator amongst its contents and where the operating environments contain a number of secondary interfering targets along with the primary target of concern and the two target types fluctuate in accordance with the Swerling Ⅱ fluctuation model and to compare their performances under various operating conditions.展开更多
The operation variables,including feed rate of ore slurry,caustic solution and live steams in the double-stream alumina digestion process,determine the product quality,process costs and the environment pollution.Previ...The operation variables,including feed rate of ore slurry,caustic solution and live steams in the double-stream alumina digestion process,determine the product quality,process costs and the environment pollution.Previously,they were set by the technical workers according to the offline analysis results and an empirical formula,which leads to unstable process indices and high consumption frequently.So,a multi-objective optimization model is built to maintain the balance between resource consumptions and process indices by taking technical indices and energy efficiency as objectives,where the key technical indices are predicted based on the digestion kinetics of diaspore.A multi-objective state transition algorithm(MOSTA)is improved to solve the problem,in which a self-adaptive strategy is applied to dynamically adjust the operator factors of the MOSTA and dynamic infeasible threshold is used to handle constraints to enhance searching efficiency and ability of the algorithm.Then a rule based strategy is designed to make the final decision from the Pareto frontiers.The method is integrated into an optimal control system for the industrial digestion process and tested in the actual production.Results show that the proposed method can achieve the technical target while reducing the energy consumption.展开更多
基金Projects(51908388,51508315,51905320)supported by the National Natural Science Foundation of ChinaProject(2019 JZZY 010911)supported by the Key R&D Program of Shandong Province,China+1 种基金Project supported by the Shandong University of Technology&Zibo City Integration Develo pment Project,ChinaProject(ZR 2021 MG 012)supported by Shandong Provincial Natural Science Foundation,China。
文摘Because of the limitations of electric vehicle(EV)battery technology and relevant supporting facilities,there is a great risk of breakdown of EVs during driving.The resulting driver“range anxiety”greatly affects the travel quality of EVs.These limitations should be overcome to promote the use of EVs.In this study,a method for travel path planning considering EV power supply was developed.First,based on real-time road conditions,a dynamic energy model of EVs was established considering the driving energy and accessory energy.Second,a multi-objective travel path planning model of EVs was constructed considering the power supply,taking the distance,time,energy,and charging cost as the optimization objectives.Finally,taking the actual traffic network of 15 km×15 km area in a city as the research object,the model was simulated and verified in MATLAB based on Dijkstra shortest path algorithm.The simulation results show that compared with the traditional route planning method,the total distance in the proposed optimal route planning method increased by 1.18%,but the energy consumption,charging cost,and driving time decreased by 11.62%,41.26%and 11.00%,respectively,thus effectively reducing the travel cost of EVs and improving the driving quality of EVs.
文摘Several Constant False Alarm Rate （CFAR） architectures, where radar systems often employ them to automatically adapt the detection threshold to the local background noise or clutter power in an attempt to maintain an approximately constant rate of false alarm, have been recently proposed to estimate the unknown noise power level. Since the Ordered-Statistics （OS） based algorithm has some advantages over the Cell-Averaging （CA） technique, we are concerned here with this type of CFAR detectors. The Linearly Combined Ordered-Statistic （LCOS） processor, which sets threshold by processing a weighted ordered range samples within finite moving window, may actually perform somewhat better than the conventional OS detector. Our objective in this paper is to analyze the LCOS processor along with the conventional OS scheme for the case where the radar receiver incorporates a postdetection integrator amongst its contents and where the operating environments contain a number of secondary interfering targets along with the primary target of concern and the two target types fluctuate in accordance with the Swerling Ⅱ fluctuation model and to compare their performances under various operating conditions.
基金Project(62073342)supported by the National Natural Science Foundation of ChinaProject(2014 AA 041803)supported by the Hi-tech Research and Development Program of China。
文摘The operation variables,including feed rate of ore slurry,caustic solution and live steams in the double-stream alumina digestion process,determine the product quality,process costs and the environment pollution.Previously,they were set by the technical workers according to the offline analysis results and an empirical formula,which leads to unstable process indices and high consumption frequently.So,a multi-objective optimization model is built to maintain the balance between resource consumptions and process indices by taking technical indices and energy efficiency as objectives,where the key technical indices are predicted based on the digestion kinetics of diaspore.A multi-objective state transition algorithm(MOSTA)is improved to solve the problem,in which a self-adaptive strategy is applied to dynamically adjust the operator factors of the MOSTA and dynamic infeasible threshold is used to handle constraints to enhance searching efficiency and ability of the algorithm.Then a rule based strategy is designed to make the final decision from the Pareto frontiers.The method is integrated into an optimal control system for the industrial digestion process and tested in the actual production.Results show that the proposed method can achieve the technical target while reducing the energy consumption.
