论王夫之的治《诗》特点与方法

王夫之《诗经稗疏》在考证名物训诂方面,多依《毛传》《尔雅》,不从《郑笺》,驳斥朱子,引证精确,足以补《传》《笺》诸说之遗。王夫之广征博引、言必有征的考据学风,多闻阙疑、以俟后人的治学态度,文献与目验相结合、文字与音韵互相贯通、以史释诗、史诗互证的论证方法和手段,为《诗经》考据学进一步发展开拓了门径,直接促进了乾嘉考据学的繁荣。当然,王夫之运用文字、音韵、训诂方法治经,是为了实现其通经致用的最终目的。

曾侯乙墓出土车(車口)铕字补正

曾侯乙墓共出土车76件,均青铜铸制,其中仅有一件铸有铭文。经笔者目验原件,共三字,为???,《曾侯乙墓》发掘报告释作“君?(广)销”。前两字所释是确而无疑的。?广音近可通,广是古代的一种兵车。但将第三字释作销则有问题。首先,从字形上看,古文字中屡见肖字,作?(盟书159:14)、?

辽钱新见品拾零

一、1986年5月,锦州市钱币同好高俊武携珍贵的"天禄通宝"访我,让我鉴定。经目验,平钱,钱文右旋读,光背。虽然已做除锈处理,但辽钱精神昂然,不失其真,故开门见山,即知真品无疑(图1)。"天禄通宝"是辽世宗耶律阮于天禄年间(947年～951年)所铸,铸额极少。1981年8月30日,在内蒙古巴林右旗羊场公社上石大队出土的一批古钱中,有"天禄通宝"一枚,是三十年代至今第一次出土问世。高君所得之天禄钱,与上石大队出土的天禄钱,无论是形制及书法等诸方面一脉相承,为研究辽世宗的铸钱。

Cultivated land information extraction in UAV imagery based on deep convolutional neural network and transfer learning

The development of precision agriculture demands high accuracy and efficiency of cultivated land information extraction. As a new means of monitoring the ground in recent years, unmanned aerial vehicle （UAV） low-height remote sensing technique, which is flexible, efficient with low cost and with high resolution, is widely applied to investing various resources. Based on this, a novel extraction method for cultivated land information based on Deep Convolutional Neural Network and Transfer Learning （DTCLE） was proposed. First, linear features （roads and ridges etc.） were excluded based on Deep Convolutional Neural Network （DCNN）. Next, feature extraction method learned from DCNN was used to cultivated land information extraction by introducing transfer learning mechanism. Last, cultivated land information extraction results were completed by the DTCLE and eCognifion for cultivated land information extraction （ECLE）. The location of the Pengzhou County and Guanghan County, Sichuan Province were selected for the experimental purpose. The experimental results showed that the overall precision for the experimental image 1, 2 and 3 （of extracting cultivated land） with the DTCLE method was 91.7%, 88.1% and 88.2% respectively, and the overall precision of ECLE is 9o.7%, 90.5% and 87.0%, respectively. Accuracy of DTCLE was equivalent to that of ECLE, and also outperformed ECLE in terms of integrity and continuity.

A non-monotone Phase-1 method in linear programming

To gain superior computational efficiency, it might be necessary to change the underlying philosophy of the simplex method. In this paper, we propose a Phase-1 method along this line. We relax not only the conventional condition that some function value increases monotonically, but also the condition that all feasible variables remain feasible after basis change in Phase-1. That is, taking a purely combinatorial approach to achieving feasibility. This enables us to get rid of ratio test in pivoting, reducing computational cost per iteration to a large extent. Numerical results on a group of problems are encouraging.

Antioxidant therapy in the management of acute,chronic and post-ERCP pancreatitis:A systematic review

We systematically reviewed the clinical trials which recruited antioxidants in the therapy of pancreatitis and evaluated whether antioxidants improve the outcome of patients with pancreatitis. Electronic bibliographic databases were searched for any studies which investigated the use of antioxidants in the management of acute pancreatitis （AP） or chronic pancreatitis （CP） and in the prevention of post-endoscopic retrograde cholangio-pancreatography （post-ERCP） pancreatitis （PEP） up to February 2009. Twenty-two randomized, placebo-controlled, clinical trials met our criteria and were included in the review. Except for a cocktail of antioxidants which showed improvement in outcomes in three different clinical trials, the results of the administration of other antioxidants in both AP and CP clinical trials were incongruent and heterogeneous.Furthermore, antioxidant therapy including allopurinol and N-acetylcysteine failed to prevent the onset of PEP in almost all trials. In conclusion, the present data do not support a benefit of antioxidant therapy alone or in combination with conventional therapy in the management of AP, CP or PER Further double blind, randomized, placebo-controlled clinical trials with large sample size need to be conducted.

Introduction of CMIP5 Experiments Carried out with the Climate System Models of Beijing Climate Center

The climate system models from Beijing Climate Center, BCC_CSM1.1 and BCC_CSM1.1-M, are used to carry out most of the CMIP5 experiments. This study gives a general introduction of these two models, and provides main information on the experiments including the experiment purpose, design, and the external forcings. The transient climate responses to the CO2 concentration increase at 1% per year are presented in the simulation of the two models. The BCC_CSM1.1-M result is closer to the CMIP5 multiple models ensemble. The two models perform well in simulating the historical evolution of the surface air temperature, globally and averaged for China. Both models overestimate the global warming and underestimate the warming over China in the 20th century. With higher horizontal resolution, the BCC_CSM1.1-M has a better capability in reproducing the annual evolution of surface air temperature over China.

Magnetic Resonance Imaging and Biological Markers in Pituitary Adenomas with Invasion of the Cavernous Sinus Space

Objective: To investigate the predictability of MRI and the possiblebiological markers of cavernous sinus invasion of pituitary adenomas associated with fourphenomenas: angiogenesis, cell proliferation, apoptosis and matrix metalloproteinase. Methods: Weevaluated 45 patients with pituitary adenoma according to the MRI, surgical findings and theimmunohistochemistry staining of tumor tissues. Results: The results have shown that the sensitivityof MRI for predicting cavernous sinus invasion in this prospective study was 60%, its specificity85%, its positive predictive value 83.33%, negative predictive value 62.96%. 45 specimens ofpituitary adenomas were analyzed for expression of F8, VEGF, Ki-67, c-myc, Bcl-2, nm23 and MMP-9immunoreactivity using immunoperoxidase staining. MVD was assessed using F8-related antigen. Theresults have shown that MVD of invasive pituitary adenomas was significantly higher than that ofnoninvasive (P 【 0.001). There was an association between the invasion of pituitary adenomas andKi-67 LI (P = 0.039) or the expression of VEGF (P 【 0.001) and MMP-9 (P 【 0.001). But c-myc LI andBcl-2 expression have no association with invasiveness of pituitary adenomas (P = 0.061 versus P =0.201). On the other hand, there is an inverse relationship between nm23 expression and tumorinvasion (P 【 0.001). Conclusion: Parasellar extension of pituitary adenomas through the medial wallof the cavernous sinus is diagnosed at surgery, and with sensitive gadolinium-enhanced MRI, itsextent can be partly determined by radiology. Although our study has shown that MVD and theexpression of VEGF, Ki-67, nm23 and MMP-9 have associations with invasiveness of pituitary adenomas,they are lack of specificity. These markers can only provide some useful information.

Linear Track Estimation Using Double Pulse Sources for Near-Field Underwater Moving Target

The double pulse sources （DPS） method is presented for linear track estimation in this work. In the field of noise identification of underwater moving target, the Doppler will distort the frequency and amplitude of the radiated noise. To eliminate this, the track estimation is necessary. In the DPS method, we first estimate bearings of two sinusoidal pulse sources installed in the moving target through baseline positioning method. Meanwhile, the emitted and recorded time of each pulse are also acquired. Then the linear track parameters will be achieved based on the geometry pattern with the help of double sources spacing. The simulated results confirm that the DPS improves the performance of the previous double source spacing method. The simulated experiments were carried out using a moving battery car to further evaluate its performance. When the target is 40-60m away, the experiment results show that biases of track azimuth and abeam distance of DPS are under 0.6° and 3.4m, respectively. And the average deviation of estimated velocity is around 0.25m/s.

Integration Possibility of Urban Public Bus System and Cable Car in Maribor

Combination of a bus system and cable car system can reduce the overall congestion of traffic in urban areas, where surrounding hills or mountains hold larger settlements or tourist and recreational infrastructure. With this kind of integration number of individual car trips can be significantly reduced. In this paper, the authors present an analysis of the pilot project implementation, which was held in Maribor. The authors conducted a limited test trial of two means of transportation, combining them into a single operating transport offer for inhabitants and tourists. Combined transport option proved to be a good starting point for reduction of traffic and parking congestion during winter tourist season and beyond. Method used in the research, in order to gain actual potential of integrating two systems and improving public transport offer, was establishment and implementation of the pilot project in Maribor during January 2011. Data was gathered through interviews of two interest groups. The first covered the users who were brought to the foothills of Pohorje＇s ski center by bus. The second covered the cable car users that were traveling to the top of Pohorje. For a limited time period, a trial principle of a single ticket was established, which gave ski-pass holders free bus ride on bus line No. 6. With the aim of reducing CO2, test drives of hybrid bus and compressed natural gas bus were conducted alongside many promotional activities with which users were informed of importance of environmentally friendly mobility options.

Optimization and experimental research on a new-type short cylindrical cup-shaped harmonic reducer

In order to obtain a new-type short cylindrical cup-shaped flexspline that can be applied to space mechanisms,the APDL language of ANSYS software was employed to develop a parameterized equivalent contact model between a flexspline and a wave generator. The validity of the parameterized equivalent contact model was verified by comparing the results of the analytic value of the contact model and the value calculated by the theoretical formula. The curvilinear trend of stress was obtained by changing the structural parameter of the flexspline. Based on the curvilinear trend of stress,multi-objective optimizations of key structural parameters were achieved. Flexspline,wave generator,and circular spline of a new 32-type short cylindrical cup-shaped harmonic reducer were designed and manufactured. A performance test bench to carry out tests on the harmonic reducer was designed. Contrast experiments were implemented to determine the efficiency of the new 32-type short cylindrical cup-shaped harmonic reducer and the conventional 32-type harmonic reducer under different conditions. The experimental results reveal that there is approximately equality in terms of efficiency between the new 32-type short cylindrical cup-shaped harmonic reducer and the conventional 32-type harmonic reducer. The volume of the flexspline of the new 32-type short cylindrical cup-shaped harmonic reducer is reduced by approximately 30% through multi-objective optimization. When the new 32-type short cylindrical cup-shaped harmonic reducer is used on the wheel of a rover prototype,the mass of the wheel hub is decreased by 0.42 kg. Test analysis of wheel motion verifies that the new 32-type short cylindrical cup-shaped harmonic reducer can meet the requirements regarding bearing capacity and efficiency.

Study on the network delay of periodic information in the NCS based on EPA

The network delay of the periodic messages transmission in the network control system （NCS） based on Ethemet for plant automation （EPA） is analyzed from the theoretical and experimental perspective in this paper. The composition and the characteristics of the network delay of EPA periodic messages transmission in a subnet is studied through analyzing the information transmission regularity and EPA deterministic scheduling mechanism. On this basis, the queuing delay at communication schedule management entity （EPA _ CSME） that is the most important component of network delay is analyzed, during which the formulas for the queuing delay of periodic messages and other real time parameters are proposed. Furthermore, an experiment is developed to test each component of network delay of periodic messages transmission in a EPA subnet. According to the experimental and the theoretical analysis, the conclusion is drawn that the delay during which the periodic messages wait for the periodic messages transmission time slice is the main factor that causes considerable network delay, and improvement method is presented.

Innovation, Competitiveness and Prosperity： A Factor Analysis of Innovation Indicators in Spain

Competitiveness is a wide concept applied to many fields, especially in economics. The study of tourism competitiveness has been focused on different factors that can enhance the prosperity of a destination. One of these factors is innovation. Innovation makes destination＇s enterprises more advanced and efficient, therefore more productive. Innovation is an enhancer of competitiveness and a generator of prosperity because innovation in every aspect （technology, knowledge, organization, and processes） will provide a better quality of life for the inhabitants of the destination. The incidence of innovation on these concepts is validated by a structural equation model. We measure innovation by a range of indicators and through a factor analysis; we get the most relevant indicators of innovation for the model developed in Spain.

The Generalized Clinical Trial Outcomes

The clinical trial based on the likelihood ratio test has many preferred statistical properties such as asymptotic and self-adaptive properties. Along with the constant MCID （minimum clinical important difference）, the conventional trial outcomes can be expanded into the strict, aggressive and conservative outcomes; it makes the interpretations of trial conclusion more flexible. Besides, it will show that the trial goal and trial outcome are different concept. The trial goal switching is not a statistical issue, but a clinical decision.

Analyzing and exemplify the phenomenon of lossing control in vibration experiment

With science and technology development,vibration testing as the most important item in reliability test is becoming more and more important,at the same time,vibrate condition becoming more and more complicated,the phenomenon increases that the output of controller goes beyond controlling range so that destroy the specimen. In this paper,some skills such as how to set the parameters of force controller,where to place the sensor,which material to be chosen and which skills to be used while making jigs were introduced to avoid the just matter. At last,some examples were given to prove the validity of the method proposed.

基于AUV垂直面运动控制的状态增减多模型切换

自主水下机器人(autonomous underwater vehicle,AUV)系统垂直面运动具有强耦合性、非线性等特点导致AUV系统垂直面难以精确控制,且其纵倾角需控制在某一阈值内,以保证系统安全。根据以上控制要求与AUV垂直面运动模型特点,提出将其解耦为深度控制子模型与纵倾角控制子模型,构建AUV系统垂直面运动控制模型集,根据模型集所含两子模型特点,提出了状态变量增减的多模型切换的概念。基于切换系统稳定判据——共同Lyapunov函数法,提出了变加权多模型切换策略,实现了切换过程的稳定性,避免了切换过程的抖动问题。多次湖泊试验证明,加权多模型切换策略避免了由于期望深度变化而造成的执行机构饱和、深度和纵倾角超调量过大等问题,且改善了AUV系统深度运动的静动态控制品质。

Practice and experience of engineering culture development in the Sutong Bridge project

To keep up with the time,culture is integrated to large-scale construction project management in China,which will absolutely add more vitality into construction project management in our country.Engineering culture is an integration of project construction and engineering culture.However,engineering culture development enjoys its own particularity as a project is constructed once only within a limited period of time.This paper gives affirmative opinion that engineering culture development in large-scale projects backs project management on the basis of thorough investigation of engineering culture development in Sutong Bridge Project and after deepened analysis,proposes new thinking pattern of engineering culture development in large-scale projects in a systematic manner,including thorough understanding of the essence of engineering culture,principle and contents of engineering culture development as well as efficient method in respect of establishment and implementation of engineering culture,and therefore provides a standard reference and systematic thinking pattern for engineering culture development in future large-scale projects.

Talk about audit of the petty maintenance project

Petty maintenance projects cost lowly relative to other projects, project time limit is short. The characteristics such as form much shape also have particularity for its audit. This paper the existent actual condition in scattered project settlement combination own working experience, put forward some methods for petty maintenance project audit.

Research On Construction And Optimization Of Curriculum System To Biological Engineering

Curriculum system construction is the core of talent training plan and the key to school operations.This article carried on a more in-depth study and discussion to biological curriculum system construction project,described the four aspects characteristics of the curriculum,and discussed in the course of system integration, comprehensive and updated curriculum, bilingual education and the strengthening of the four areas to carry out comprehensive, innovative experiments.

Introducing CFD and Wind Tunnel Testing in an Undergraduate Fluid Mechanics Course

CFD （computational fluid dynamics） is following the trend of CAD and FEA （finite element analysis） to undergraduate education especially with recent advances in commercial codes. It will soon take its place as an expected skill for new engineering graduates. CFD was added as a component to an experiment in a junior level fluid mechanics course. The objectives were to introduce CFD, as an analysis tool, to the students and to support the theoretical concepts of the course. The students were asked to complete an experimental two-dimensional study for a wing in a wind tunnel, to use CFD to simulate the flow, and to predict the aerodynamic lift using CFD as well as the experimentally obtained pressure distribution. In addition, they had to compare their results to published data for the studied wing. Details of the course, the wind tunnel test and the CFD simulations are presented. Samples from the students＇ work are used in the discussion. The lab activities were successfully completed by the students and the learning objectives were well addressed. One of the valuable outcomes from this lab was the opportunity for the students to integrate multiple fluid mechanics analysis tools and learn about the limits for each tool. CFD also enhanced the learning in the lab activities and increased students＇ interest in the subject.