This article investigated effects of degrees of deformation, heat treatment temperatures and holding times on the recrystallization behavior of directionally solidified DZ4 superalloy. The results showed that, recryst...This article investigated effects of degrees of deformation, heat treatment temperatures and holding times on the recrystallization behavior of directionally solidified DZ4 superalloy. The results showed that, recrystallization of DZ4 superalloy could take place during solution heat treatment after certain degrees of cold work and depths of recrystallization increased with increasing degrees of deformation and heat treatment temperature. At the temperature below y’ solvus, prolonged holding times did not play an important role in improving recrystallization depths. Moreover, prevention measures for recrystallization of directionally solidified blades were given.展开更多
Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning cal...Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning calorimetry(DSC). Jeziorny equation and Mo equation were applied to describe the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. The activation energies for non-isothermal crystallization were obtained by Vyazovkin's method and Friedman's method, respectively. These results showed that Jeziorny equation and Mo equation well described the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. It was found that the values of the activation energy for non-isothermal crystallization of the Nylon 10T/1010 were lower than those of the Nylon 10 T at a given temperature or relative crystallinity degree,which revealed that crystallization ability of the Nylon 10T/1010 was higher. The crystal morphology was observed by means of a polarized optical microscope(POM) and X-ray diffraction(XRD). It was found that the addition of sebacic acid comonomer not only did not change the crystal form of the Nylon 10 T, but also significantly increased the number and decreased the size of spherulites. Comparing with the Nylon 10 T, the crystallization rate was increased with the addition of the sebacic acid comonomer.展开更多
文摘This article investigated effects of degrees of deformation, heat treatment temperatures and holding times on the recrystallization behavior of directionally solidified DZ4 superalloy. The results showed that, recrystallization of DZ4 superalloy could take place during solution heat treatment after certain degrees of cold work and depths of recrystallization increased with increasing degrees of deformation and heat treatment temperature. At the temperature below y’ solvus, prolonged holding times did not play an important role in improving recrystallization depths. Moreover, prevention measures for recrystallization of directionally solidified blades were given.
基金Supported by the National Science and Technology Support Program of China(No.2013BAE02B01)the Special Project on the Integration of Industry,Education and Research of Guangdong Province(No.2013B090500003)the Commissioner Workstation Project of Guangdong Province(No.2014A090906002)
文摘Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning calorimetry(DSC). Jeziorny equation and Mo equation were applied to describe the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. The activation energies for non-isothermal crystallization were obtained by Vyazovkin's method and Friedman's method, respectively. These results showed that Jeziorny equation and Mo equation well described the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. It was found that the values of the activation energy for non-isothermal crystallization of the Nylon 10T/1010 were lower than those of the Nylon 10 T at a given temperature or relative crystallinity degree,which revealed that crystallization ability of the Nylon 10T/1010 was higher. The crystal morphology was observed by means of a polarized optical microscope(POM) and X-ray diffraction(XRD). It was found that the addition of sebacic acid comonomer not only did not change the crystal form of the Nylon 10 T, but also significantly increased the number and decreased the size of spherulites. Comparing with the Nylon 10 T, the crystallization rate was increased with the addition of the sebacic acid comonomer.
