一道2021年上海市高三数学竞赛试题的多解探究

探究一道上海市高三数学竞赛试题的解法,供教师在教学过程中参考,能对同学们学习这类问题有所帮助和启发.

数控车床坐标系设定及应用

数控机床的加工是由程序控制完成的,所以坐标系的确定与使用非常重要。数控机床坐标系的确定不但影响机床的制造精度,而且影响零件的加工精度。

数控车床坐标系设定及应用

数控机床的加工是由程序控制完成的,所以坐标系的确定与使用非常重要。数控机床坐标系的确定不但影响机床的制造精度,而且影响零件的加工精度。

带最优乘子牛顿法在交直流系统潮流计算中的应用

交直流系统潮流计算的统一迭代法的收敛性较交替迭代法更优,但对一些病态运行条件和潮流无解的情况,统一迭代法将发散,得不到有用信息。文中将交流系统中广泛应用的最优乘子潮流方法推广到交直流系统的潮流计算中。根据直流系统稳态方程的特点引入辅助变量,使得直流系统潮流方程全部转换为二次或线性方程。给出了直角坐标系和极坐标系下交直流系统带最优乘子牛顿法潮流的实现方法。通过算例验证了所述方法的有效性,并对2种坐标系下的结果进行了比较和分析。

A new measuring method for maximal length, width and thickness dimensions of coarse aggregates

In order to establish a new method for measuring the dimensions of coarse aggregates, five different-size flat and elongated (F&E) coarse aggregates were glued into two specimens by epoxy resin, respectively, and slice images were obtained by X-ray CT, then the aggregates were extracted by the fuzzy c-means clustering algorithm. Attributions of the particle on different cross-sections were determined by the ‘overlap area method’. And unified three-dimensional Cartesian coordinate system was established based on continuous slice images. The coefficient values of spherical harmonics descriptor representing particles surface profile were gained, then each scanned particle was represented by 60×120 discrete points conformably with spherical harmonics descriptor. The chord length and direction angles were determined by the calculation. With the major axis (L) and orthogonal axis (W and T), the calculated results were compared with those measured by caliper. It is concluded that the new L, W, and T dimension measuring method is able to take the place of the present manual measurement.

浅谈圆弧加工指令G02/G03的判断方法及应用

数控车削加工是数控加工中用的最多的加工方法之一，在数控车床上可以加工由任意直线和圆弧形成的形状复杂的回转体零件。本文主要介绍了手工编程中编制圆弧轮廓加工程序时的顺、逆圆弧插补指令G02、G03的判断方法。

Seismic Waves in a Layered Half-Space from an Arbitrary Buried Source

In this paper, a transfer matrix and a three-dimensional dynamic response of a layered half-space to an arbitrary buried source are derived with the aid of a technique which combines the Laplace and two-dimensional Fourier transforms in a rectangular coordinate system. This method is clear in concept, and the corresponding formulas given in the paper are simple and convenient for marine seismic prospecting and other fields' applications. An example is presented and the calculated results are in good agreement with those of the finite element method (FEM).

Self-Similar Solutions of Three-Dimensional Navier-Stokes Equation

In this article we will present pure three dimensional analytic solutions for the Navier-Stokes and the continuity equations in Cartesian coordinates. The key idea is the three-dimensional generalization of the well-known self-similar Ansatz of Barenblatt. A geometrical interpretation of the Ansatz is given also. The results are the Kummer functions or strongly related. Our final formula is compared with other results obtained from group theoretical approaches.

On the Significance and Use of the Generalized Moist Potential Vorticity Equation

In this paper,the continuity and thermodynamic equations including moisture forcings were derived.Using these two equations and the basic momentum equation of local Cartesian coordinates,the budget equation of generalized moist potential vorticity(GMPV) was derived.The GMPV equation is a good generalization of the Ertel potential vorticity(PV) and moist potential vorticity(MPV) equations.The GMPV equation is conserved under adiabatic,frictionless,barotropic,or saturated atmospheric conditions,and it is closely associated with the horizontal frontogenesis and stability of the real atmosphere.A real case study indicates that term diabatic heating could be a useful diagnostic tool for heavy rainfall events.

A Computer Modeling of the China Central Television Headquarters in Beijing

This paper deals with the computer modeling of structures starting from a point cloud. The CCTV （China Central Television） tower headquarters is the case for study because the shape of this building is non-stellar, concave and multi-connected. It is composed of sowns and chains. The sown is the representation of a horizontal plane formed by dense points. The chain is a planar path modeled by rare points. The CCTV structure is defined only by the three orthogonal Cartesian coordinates of the points. The proposed computer modeling uses a sequence of procedures and the desired outputted 3D model is consistent. The first procedure is devoted to attributing points to their voxel and to estimating three values needed afterwards. The second procedure is devoted to analyzing clusters vertically and horizontally, to preliminarily distinguishing chains from sowns and to generating relational matching. The third procedure is devoted to building closed paths between all chains and all their projections on sowns. The fourth procedure is devoted to connecting points with triangles. The fifth procedure, still being implemented, is devoted to interpolating triangles with triangular splines. The results show it is possible to achieve the 3D model using the above mentioned procedures. These procedures are written, implemented and tested and they form a library of people＇s own software. The code is written using Matlab. It is not possible to obtain the required 3D model if the procedures are applied in the wrong order or one step is skipped. To conclude, it is possible to obtain the computer model of the CCTV using the provided sequence of procedures.

Differential geometric modeling of guidance problem for interceptors

It is a comparatively convenient technique to investigate the motion of a particle with the help of the differential geometry the-ory,rather than directly decomposing the motion in the Cartesian coordinates.The new model of three-dimensional (3D) guidance problem for interceptors is presented in this paper,based on the classical differential geometry curve theory.Firstly,the kinematical equations of the line of sight (LOS) are gained by carefully investigating the rotation principle of LOS,the kinematic equations of LOS are established,and the concepts of curvature and torsion of LOS are proposed.Simultaneously,the new relative dynamic equations between interceptor and target are constructed.Secondly,it is found that there is an instan-taneous rotation plane of LOS (IRPL) in the space,in which two-dimensional (2D) guidance laws could be constructed to solve 3D interception guidance problems.The spatial 3D true proportional navigation (TPN) guidance law could be directly introduced in IRPL without approximation and linearization for dimension-reduced 2D TPN.In addition,the new series of augmented TPN (APN) and LOS angular acceleration guidance laws (AAG) could also be gained in IRPL.After that,the dif-ferential geometric guidance commands (DGGC) of guidance laws in IRPL are advanced,and we prove that the guidance commands in arc-length system proposed by Chiou and Kuo are just a special case of DGGC.Moreover,the performance of the original guidance laws will be reduced after the differential geometric transformation.At last,an exoatmospheric intercep-tion is taken for simulation to demonstrate the differential geometric modeling proposed in this paper.

Construction of homogeneous loading functions for elastoplastic damage models for concrete

Over the past 2 decades,tight restriction has been imposed on strength criteria of concrete by the combination of plasticity and damage in one theory.The present study aims at constructing plastic/damage loading functions for elastoplastic damage models for concrete that can perform more satisfactorily in 3D stress states.Numerous strength criteria of concrete are reorganized according to their simplest representations as Cartesian,cylindrical,mixed cylindrical-Cartesian,and other forms,and the homogeneity of loading functions discussed.It is found that under certain supplementary conditions from physical meanings,an unambiguous definition of the cohesion in a strength criterion,which is demanded in an elastoplastic damage model,is usually available in an explicit or implicit form,and in each case the loading function is still homogeneous.To apply and validate the presented theory,we construct the respective homogeneous damage and plastic loading functions and implant them into some widely used elastoplastic damage models for concrete,and their performances in triaxial compression prove to have improved significantly.

An Enlarged Canonical Quantization Scheme and Quantization of a Free Particle on Two-Dimensional Sphere

For a non-relativistic particle that freely moves on a curved surface, the fundamental commutation relations between positions and momenta are insufficient to uniquely determine the operator form of the momenta. With introduc- tion of more commutation relations between positions and Hamiltonian and those between momenta and Hamiltonian, our recent sequential studies imply that the Cartesian system of coordinates is physically preferable, consistent with Dirae＇s observation. In present paper, we study quantization problem of the motion constrained on the two-dimensional sphere and develop a discriminant that can be used to show how the quantization within the intrinsic geometry is im- proper. Two kinds of parameterization of the spherical surface are explicitly invoked to investigate the quantization problem within the intrinsic geometry.

Angular momentum dependence of quasifission dynamics in the reaction ^(48)Ca+^(244)Pu

The quasifission dynamics in the reaction ^(48)Ca+^(244)Pu is investigated in the framework of time-dependent Hartree-Fock(TDHF)theory. The calculations are performed in three-dimensional Cartesian coordinate without any symmetry restrictions. The full Skyrme energy functional is incorporated in our TDHF implementation. The quasifission dynamics is quite sensitive to the angular momentum of colliding system. The contact time of quasifission decreases as a function of angular momentum and then forms a plateau with small oscillations. The quasifission process is accompanied by an important multi-nucleon transfer. The quantum shell effect plays a crucial role in the mass and charge of quasifission fragments. The mass-angle distribution of the fragments is calculated, which can be compared directly with future experiments.