论三朝《高僧传》文学互见艺术

三朝《高僧传》指梁释慧皎所著《高僧传》、唐释道宣所著《续高僧传》和宋释赞宁的《宋高僧传》三部僧人传记,作品资料丰富翔实,一些事迹虽与传主生平主线关系不大,但却能生动地反映高僧生活的另一面,所以三位作者都在文中积极运用了互见法,将这些材料安排到别的传记中,既表现僧侣间的交游,又突出高僧人格魅力,同时更为全面地展示出高僧独特而丰富的个性、贡献、交游等,可谓文美义周,互见法的使用使三朝《高僧传》更具鲜明的文学特色。

不同应变率加载下硅的高压相变行为

高压相变是凝聚态物理、地球与行星科学、材料科学等领域关注的核心问题之一,而加载应变率是相变动力学过程的重要影响因素。由于动态加载下物质相结构原位诊断技术的不足以及宽广加载应变率下物质高压相变系统实验研究的缺失,难以开展基于原子尺度物理机制的相变动力学过程建模和数值模拟研究。由于硅的高压相极其丰富,且拥有大量亚稳相,动力学因素在其高压相变过程中发挥着至关重要的作用,因此,硅是研究高压相变动力学的理想材料,对普适相变动力学过程的理论建模具有重要意义。以硅为例,介绍其在准静态、中等应变率和高应变率加载下的相变行为,探讨加载应变率对其高压相变行为的影响。

Twinning behaviors of Mg-Sn alloy with basal or prismatic Mg_(2)Sn

The Mg-Sn alloys,with basal or prismatic Mg_(2)Sn laths,were employed to reveal the effect of precipitate orientation on twinning behavior quantitatively.The Mg-5wt.%Sn alloys with basal or prismatic Mg_(2)Sn were compressed to study the twinning behaviors.Subsequently,an Orowan strengthening model was developed to quantitatively investigate the critical resolved shear stress(CRSS)increment of precipitates on twinning.The results revealed that the prismatic precipitates hindered the transfer and growth of tensile twins more effectively compared with the basal precipitates.The decreased proportion of tensile twins containing prismatic Mg_(2)Sn might be attributed to a larger CRSS increment for tensile twins compared with that for basal precipitates.The obvious decreased twinning transfer in the alloy with prismatic Mg_(2)Sn could be due to its higher geometrically necessary dislocation and enhanced CRSS of tensile twins.Notably,the prismatic precipitates have a better hindering effect on tensile twins during compression.

钛/不锈钢相变扩散连接工艺研究

探讨了钛/不锈钢相变扩散连接的可行性及合适工艺参数,分析了影响相变扩散连接的主要因素及接头微观形态。

略论两晋兄弟相承应否为后议题

两晋帝位多兄终弟及。礼家在对宗统与君统做出自觉区分的基础上形成了兄弟相承不相为后的理念从而解决了兄弟同代而成父子的伦理困境。这体现了两晋礼家对周代宗法制度的内在精神有了更为深入的把握。这一制度的确立对后世帝位传承制度产生了较大的影响。

论韩非人情论的价值观意蕴

韩非的人情论不是没有善恶判断的价值中立,置于“相为”关系中就会发现,它蕴含着鲜明丰富的价值观。韩非认为“父诮子怨”的自为心是依赖相为关系而产生的,因而主张“以利之为心”的利他价值观。韩非不是将利他作为善恶的标准,而是作为维护相为关系的方法,它具有工具性价值,终极目的在于通过相为关系凝聚国力、统一天下。只有坚持长远利他,才能增进不同主体的共同利益进而巩固相为关系。富强也是相为关系中不同主体的价值观共识,君主的利他体现在满足臣民的富贵愿望,臣民的利他体现在满足君主的霸王愿望。韩非更深入地认识到自为心会导致君臣利异,根源在于臣民想获得法律制度规定之外的利益。针对君臣利异,韩非提出了公、私之分,公利是践行法治所增进的国家利益;私利不是一般意义的个人利益,而是破坏法制所获得的个人利益。君主要守护公利,要防止臣民破坏法治。韩非强调把公利作为需要维护的核心价值观。

Microstructure and properties of laser micro welded joint of TiNi shape memory alloy

Butt welding of 0.2 mm-thick TiNi shape memory alloy sheet （SMA） was carried out using impulse laser, and tensile strength, fracture morphology, microstructure and phase change behaviour of welded joint were studied. The results show that using impulse laser can realize good butt welding of TiNi SMA sheet, tensile strength of welded joint is 683 MPa, which achieves 97% of that of cold rolled base metal, and the fracture mode of welded joint is ductile type as well as base metal. The welded joint can be divided into four zones according to grain size and microstructure. The microstructures of welded seam center zone are fine equiaxed crystals and the microstructures of both lower surface and upper surface edge zones are columnar crystals. When welded joint is vacuum annealed after welding, the phase transformation process is basically similar to the annealed base metal.

Phase transformation and damping behavior of lightweight porous TiNiCu alloys fabricated by powder metallurgy process

Porous TiNiCu ternary shape memory alloys （SMAs） were successfully fabricated by powder metallurgy method. The microstructure, martensitic transformation behavior, damping performance and mechanical properties of the fabricated alloys were intensively studied. It is found that the apparent density of alloys decreases with increasing the Cu content, the porous Ti50Ni40Cu10 alloy exhibits wide endothermic and exothermic peaks arisen from the hysteresis of martensitic transformations, while the porous Ti50Ni30Cu20 alloy shows much stronger and narrower endothermic and exothermic peaks owing to the B2-B19 transformation taking place easily. Moreover, the porous Ti50Ni40Cu10 alloy shows a lower shape recovery rate than the porous Ti50Ni50 alloy, while the porous Ti50Ni30Cu20 alloy behaves reversely. In addition, the damping capacity （or internal friction, IF） of the porous TiNiCu alloys increases with increasing the Cu content. The porous Ti50Ni30Cu20 alloy has very high equivalent internal friction, with the maximum equivalent internal friction value five times higher than that of the porous Ti50Ni50 alloy.

Microstructure characteristics and solidification behavior of thixomolded Mg-9%Al-1%Zn alloy

Experimental investigation and theoretical analysis of the microstructure of thixomolded AZ91D were carried out to comprehensively understand the morphology transformation of solid particles and the solidification behavior. Typical microstructure of thixomolded AZ91D is composed of a-Mg and β-Mg17Al12, characterized with aun, aprim and eutectic. Four kinds of aun are classified according to the morphology and generation mechanism, such as spherical （al）, irregular （a2）, entrapping liquid alloy inside （a3） and entrapping pool inside （a4）. Under the effect of heating, shearing, collision, agglomeration or fragmentation, a2 and a4 can be the middle states ofal and a3. Similarly, a4 and a3 can also break into a2 and become al at the end. Controlled by undercooling, aprim nucleates and spherically grows within the remaining liquid alloy of thixomolded AZ91D until instability growth. The investigated microstructure was theoretically proved according to the analysis of Mg-Al binary phase diagram.

Review of Soil Nutrients of Forest Nature Reserve

Based on a large number of relevant literatures, the effects of environmental factors and human factors on forest soil nutrients in nature reserve were summarized, as well as the soil quality assessment and correlation of soil. nutrients, to provide references for a deep research on forest nature reserve soil and its protection. The distribution of forest soil nutrients has significant spatial heterogeneity, and its final distribution pattern is the result of joint action of environmental factors, including topography, vegetation, soil type, seasonal change as well as soil microorganism, and human factors. In natural ecosystem, environmental factors are the main factors that determine the differences of soil nutrients. Effective human management can promote the accumulation of forest soil nutrients, but improper interference will cause a significant loss of soil nutrients. Accurate soil quality evaluation can objectively clarify the impact of different soil management practices on soil, contributing to the timely adjustment of management measures. The establishment of long-term soil monitoring stations in forest nature reserves is a good way to master the influencing factors and the mechanism of forest soil nutrients, and can ultimately provide theoretical guidance for a sustainable and healthy operation of forest nature reserve.

三维石油遥感应用中多时相影像数据管理

针对目前多时相影像数据管理主要是面向影像产品管理,仅考虑影像产品本身的信息作为管理要素,无法满足石油行业遥感应用要求这一问题,提出一种面向三维石油遥感应用的多时相数据管理方法,通过采用数据组织目录结构与瓦片存储目录结构相结合的方式,建立了多时相影像数据的分级管理与访问。该方法满足石油遥感应用多样性、应用的油区范围分散、多数据源组合、油区变化性检测的要求,并以鄱阳湖三角洲环境变化中多时相数据管理为例进行了软件实现。

Variation of the second-phase morphology and its influence on fracture behavior of Al-Si alloy

Using an optical microscope and scanning electron microscope (SEM), the variation of eutectic Si morphology of Al-Si alloy in solution treatment was observed to study its influence on mechanical properties and fracture behavior. The results show that eutectic Si undergoes stubbing, necking, fragmentation, and growth in the initial stage (250 min); in the middle solution stage (250 to 400 min), the eutectic Si morphology has no significant change, only the degree of spheroidizing becomes higher; after 600 min, the growth of eutectic Si is a coarsening process controlled by diffusion and follows the Liftshitz-Slyozov-Wangner (LSW) model, and the eutectic Si morphology deteriorates due to the occurrence of facets and lap. Based on the quantitative measure and regression analysis, the eutectic Si morphology has a remarkable influence on mechanical properties and fracture behavior.

Hot pressing densification of WC-Mo_xC binderless carbide

WC-6MoxC-0.47Cr3C2-0.28VC binderless carbide was prepared by hot pressing （1700 °C, 20 MPa）. The sample was observed and analyzed by scanning electron microscopy, energy dispersive X–ray spectroscopy and X–ray diffraction. The results show that during the hot pressing process, W atoms dissolve substantially into the MoxC crystal lattices; whilst, the reverse dissolution of Mo atoms into the WC crystal lattices takes place. Consequently, the main phase and binder phase structure are formed. The phase compositions of the main phase and binder phase are a WC-based solid solution containing Mo and a Mo2C-based solid solution containing W, respectively. The isotropic dissolution and precipitation of W and Mo atoms do not result in substantial carbide coarsening. The mechanism for the densification was discussed.

HIERARCHIC GREY QUASI-PREFERRED ANALYSIS MODEL AND ITS APPLICATION

The grey quasi-preferred analysis (GQPA) is one of important methods for realizing system analysis to conquer the limitations of the existing GQPA model, without any considerations to the difference of the different behavioral factor′s importance. It could not be used to analyze the complex system with multi-hierarchy correlation factors, the weighted synthetic method for calculating abstract incidence degrees between the system beha-vioral characteristics and correlative factors in different hierarchies is given out,and the hierarchic grey quasi-preferred analysis (HGQPA) model is established. The effectiveness of the HGQPA model is tested by the scientific-technical system of Jiangsu Province. The depth and the range of the application of GQPA are developed, and the HGQPA model is regarded as a new approach to systemically analyze the complex systems with multi-hierarchy correlation factors.

Effect of copper on precipitation and baking hardening behavior of Al-Mg-Si alloys

The effects of copper on the ageing precipitation behavior of as-quenched and pre-aged AA6016 aluminum alloy were studied by differential scanning calorimetry （DSC）, Vickers hardness measurement and transmission electronic microscopy （TEM）. The results indicate that the addition of copper facilitates the growth of clusters （GP I） to the critical size during pre-ageing. Therefore, the addition of copper accelerates the transition from GP I （pre-β＂） to GP II （β＂） during final artificial ageing, and finally results in the favorable paint-bake response. However, the one with the copper level of 0.3% does not show significant baking hardening response as expected. Pre-aging can also reduce the detrimental effect due to natural aging of copper-containing alloys.

Surfactant Distribution in the Clouding of TX114

Distribution of TX114 between coacervate and aqueous phases in clouding of various initial TX114 concentrations was studied. Effects of temperature and salinity （Na2SO4） on the distribution of TX114 concentration were also investigated. Differing from the nonionic surfactant C12E10, the distribution of TX114 is sensitive to the temperature, and it is observed that the TX114 concentration in the aqueous phase （Caq） does not depend on the initial TX114 concentration apparently at 45℃, and the Caq decreases with an increase of NazSO4 concentration. Low initial TX114 concentration in unclouded solutions, high Na2SO4 concentration, and temperature are suggested to control the surfactant loss in large-scale cloud point extraction applications.

FRACTAL BEHAVIOR OF DEVELOPMENT OF PHASE SEPARATION AND CRYSTALLIZATION IN BLENDS OF NYLON-6 WITH SODIUM SALT OF ETHYLENE /METHACRYLIC ACID COPOLYMER

Phase separation was studied by the optical microscopy in blends of nylon 6 (PA6) with sodium salt of ethylene/methacrylic acid copolymer (PEMA).The image collecting technology was used to keep track of the development of blends at a certain temperature.The fractal dimension of phase separation was calculated by the image solving technology according to the fractal theory and the self similarity behavior of the process was proved.The relationship of the fractal behavior with composition and experimental temperature was discussed.The fractal behavior of the crystallization development of the crystal phase of PA6 in blends was also discussed and the fractal behavior calculated.

Single Bubble Behavior in Direct Current Electric Field

The investigation on bubble behavior in electric field helps to analyze the mechanism of electric enhancement of boiling heat transfer. Experiments were performed to investigate the bubble deformation in direct current （DC） electric field with bubbles attached to the orifice. The air bubbles were slowly generated in the transformer oil pool at different orifices, so that the effect of flow on bubble shape was eliminated. The results showed that the bubbles were elongated and the departure volume decreased when the electric field was intensified. The major and minor axes, aspect ratio and departure volume increased with increasing the orifice diameter. Both the electric field and orifice size have great influence on bubble behavior. The bubble deformation was also simulated to compare with the experimental results. The numerical and experimental data qualitatively agree with each other.

Phase Behavior of Sodium Dodecyl Sulfate-n-Butanol-Kerosene-Water Microemulsion System

Experiments were carried out to investigate the influences of cation from electrolytes and acidity/alkalinity on the phase behavior of sodium dodecyl sulfate-n-butanol-organics-water （with electrolytes） microemulsion sys-tem. The organics used is commercial kerosene. The volume ratio of water to organics is 1︰1. The results show that the type and valence of electrolyte cations are important factors influencing the microemulsion behavior. Biva-lent Ca2＋is more effective than monovalent K＋and Na＋for the formation of Winsor type III and II microemulsion. For electrolytes with the same monovalent cation Na＋, i.e. NaCl and Na2CO3, anions in the electrolyte have some effect. Bivalent anion 23CO - leads to a lower activity of cation Na＋than monovalent anion Cl-. NaOH （or KOH） behaves similar with NaCl （or KCl）. When HCl is used as electrolyte, its acidity plays an important role. Phase in-version of microemulsion from type III （or II） to type I is observed through precipitation of Ca2＋using Na2CO3, neutralization of HCl by NaOH, and addition of water to the system, which releases the oil from the microemulsion.

Through-thickness inhomogeneity of precipitate distribution and pitting corrosion behavior of Al-Li alloy thick plate

The thorough-thickness inhomogeneity of precipitate distribution and pitting corrosion behavior of 95 mm-thick 2297 Al-Li alloy rolled plate was investigated using scanning electron microscopy, transmission electron microscopy and electrochemistry method. Precipitate distribution and pit size were statistically analyzed to obtain quantitative information and corresponding correlation. The population density and the size fraction of precipitate on different sections in the thick plate are ranked from high to low in the following order: quarter-section(QS) > surface section(SS) > mid-section(MS). After 300 min potentiostatic polarization, the number and the total volume of pits are ranked from high to low as QS>SS>MS, indicating a higher pitting susceptibility of the plate in QS with more precipitates. The through-thickness inhomogeneity of pitting corrosion in 2297 Al-Li alloy thick plate is mainly ascribed to inhomogeneous precipitate distribution.