CO_(2) methanation has a potential in the large-scale utilization of carbon dioxide.It has also been considered to be useful for the renewable energy storage.The commercial pipeline for natural gas transportation can ...CO_(2) methanation has a potential in the large-scale utilization of carbon dioxide.It has also been considered to be useful for the renewable energy storage.The commercial pipeline for natural gas transportation can be directly applied for the methane product of CO_(2) methanation.The supported ruthenium(Ru)catalyst has been confirmed to be active and stable for CO_(2) methanation with its high ability in the dissociation of hydrogen and the strong binding of carbon monoxide.CO_(2) methanation over the supported Ru catalyst is structure sensitive.The size of the Ru catalyst and the support have significant effects on the activity and the mechanism.A significant challenge re-mained is the structural controllable preparation of the supported Ru catalyst toward a sufficiently high low-temperature activity.In this review,the recent progresses in the investigations of the supported Ru catalysts for CO_(2) methanation are summarized.The challenges and the future devel-opments are also discussed.展开更多
Prestack reverse time migration（PSTM） is a common imaging method; however low-frequency noises reduce the structural imaging precision. Thus, the suppression of migration noises must be considered. The generation me...Prestack reverse time migration（PSTM） is a common imaging method; however low-frequency noises reduce the structural imaging precision. Thus, the suppression of migration noises must be considered. The generation mechanism of low-frequency noises is analyzed and the up-, down-, left-, and right-going waves are separated using the Poynting vector of the acoustic wave equation. The computational complexity and memory capacitance of the proposed method are far smaller than that required when using the conventional separation algorithm of 2D Fourier transform. The normalized wavefield separation crosscorrelation imaging condition is used to suppress low-frequency noises in reverse time migration and improve the imaging precision. Numerical experiments using the Marmousi model are performed and the results show that the up-, down-, left-, and right-going waves are well separated in the continuation of the wavefield using the Poynting vector. We compared the imaging results with the conventional method, Laplacian filtering, and wavefield separation with the 2D Fourier transform. The comparison shows that the migration noises are well suppressed using the normalized wavefield separation cross-correlation imaging condition and higher precision imaging results are obtained.展开更多
A series of CeO2‐MnOx‐Al2O3 mixed oxide catalysts （Ce：Mn：Al mole ratio=6：4：x, x=0.25, 0.5, 1, 2） were prepared by a simple one‐step inverse co‐precipitation method to investigate the influence of the incorpo...A series of CeO2‐MnOx‐Al2O3 mixed oxide catalysts （Ce：Mn：Al mole ratio=6：4：x, x=0.25, 0.5, 1, 2） were prepared by a simple one‐step inverse co‐precipitation method to investigate the influence of the incorporation of Al3＋ into CeO2‐MnOx mixed oxides. CeO2‐MnOx, CeO2‐Al2O3, and MnOx‐Al2O3 mixed oxides, and CeO2 were prepared by the same method for comparison. The samples were characterized by XRD, Raman, N2 physisorption, H2‐TPR, XPS, and in situ DRIFTS. The catalytic re‐duction of NO by CO was chosen as a model reaction to evaluate the catalytic performance. The incorporation of a small amount of Al3＋into CeO2‐MnOx mixed oxides resulted in a decrease of crys‐tallite size, with the increase of the BET specific surface area and pore volume, as well as the in‐crease of Ce3＋and Mn4＋. The former benefits good contact between catalyst and reactants, and the latter promotes the adsorption of CO and the desorption, conversion and dissociation of adsorbed NO. All these enhanced the catalytic performance for the NO＋CO model reaction. A reaction mecha‐nism was proposed to explain the excellent catalytic performance of CeO2‐MnOx‐Al2O3 catalysts for NO reduction by CO.展开更多
[Objective] This study aimed to analyze the interaction between genotype of flavonoids of barley grain and environment, to increase the flavonoid content of barley grain in cultivation and breeding. [Method] In this s...[Objective] This study aimed to analyze the interaction between genotype of flavonoids of barley grain and environment, to increase the flavonoid content of barley grain in cultivation and breeding. [Method] In this study, the content of cate- chin, myricetin, quercetin and kaempferol of barley grain planted in Kunming, Qujing and Baoshan were determined by HPLC, and the genotype, environment, genotype- environment interaction of the flavonoid content of barley grain were analyzed. [Result] According to the experimental results, the genotype variance, environmental variance and G x E interaction variance of catechin and kaempferol contents show the same trend： genotype variation 〉 environmental variation 〉 G × E interaction variation, which all reach a extremely significant level; the genotype variance, envi- ronmental variance and G × E interaction variance of quercetin and total flavonoid contents show the same trend： genetype variation 〉 G × E interaction variation 〉 environmental variation, which all reach a extremely significant level; the genotype variance and environmental variance of myricetin content both reach a extremely sig- nificant level, while the G × E interaction variance reaches a significant level, showing an order of genotype variation 〉 environmental variation 〉 G × E interaction variation; the genotype variance, environmental variance and G x E interaction vari- ance of total flavonoid content show an order of genotype variation 〉 environmental variation 〉 G × E interaction variation. Among different barley varieties, Ziguang- mangluoerling and Kuanyingdamai in Qujing, Kunming and Baoshan have relatively high content of quercetin, while other barley varieties barely contain any quercetin. The grains of Ziguangmangluoerling and Kuanyingdamai are purple, while the grains of other barley varieties are yellow. [Conclusion] Four main flavonoids and the total flavonoids of barley grain are mainly under genetic control and affected by genetic- environment interactions; the purple barley grains contain high content of quercetin.展开更多
NaY and ion exchanged NaNH4Y zeolite with NH4NO3 were used as the support to prepare CuY cata‐lysts by a high temperature anhydrous interaction between the support and copper （II） acety‐lacetonate Cu（acac）2. The...NaY and ion exchanged NaNH4Y zeolite with NH4NO3 were used as the support to prepare CuY cata‐lysts by a high temperature anhydrous interaction between the support and copper （II） acety‐lacetonate Cu（acac）2. The catalysts were used for the oxidative carbonylation of methanol to dime‐thyl carbonate （DMC） at atmospheric pressure. The textural and acidic properties of NaNH4Y zeolite and the CuY catalysts were investigated by X‐ray diffraction, scanning electron microscopy, N2 ad‐sorption‐desorption, temperature programmed reduction of H2, X‐ray photoelectron spectroscopy and temperature programmed desorption of NH3. With increasing NH4NO3 concentration, the NH4＋exchange degree increased while the crystallinity of the zeolite remained intact. Crystalline CuO was formed when the NH4＋exchange degree of NaNH4Y was low, and the corresponding CuY catalyst showed low catalytic activity. With increasing of the NH4＋exchange degree of NaNH4Y, the content of surface bound Cu＋active centers increased and the catalytic activity of the corresponding CuY catalyst also increased. The surface bound Cu＋content reached its maximum when the NH4＋ex‐change degree of NaNH4Y reached towards saturation. The CuY exhibited optimal catalytic activity with 267.3 mg/（g·h） space time yield of DMC, 6.9%conversion of methanol, 68.5%selectivity of DMC.展开更多
In order to explore the effect mechanism of solvent on the synthesis of the metal organic framework materials, the microscopic interaction between solvent and framework and the effects of N,N-dimethyl-formamide(DMF) o...In order to explore the effect mechanism of solvent on the synthesis of the metal organic framework materials, the microscopic interaction between solvent and framework and the effects of N,N-dimethyl-formamide(DMF) or N-methyl- 2-pyrrolidone(NMP) on solvothermal synthesis of [Zn4O(BDC)3]8 were investigated through a combined DFT and experimental study. XRD and SEM showed that the absorbability of NMP in the pore of [Zn4O(BDC)3]8 was weaker than that of DMF. The thermal decomposition temperature of [Zn4O(BDC)3]8 synthesized in DMF was higher than that in NMP according to TG and FT-IR. In addition, the nitrogen sorption isotherms indicated that NMP improved gas sorption property of [Zn4O(BDC)3]8. The COSMO optimized calculations indicated that the total energy of Zn4O(BDC)3 in NMP was higher than that in DMF, and compared with non-solvent system, the charge of zinc atoms decreased and the charge value was the smallest in NMP. Furthermore, the interaction of DMF, NMP or DEF in [Zn4O(BDC)3]8 crystal model was calculated by DFT method. The results suggested that NMP should be easier to be removed from pore of materials than DMF from the point of view of energy state. It can be concluded that NMP was a favorable solvent to synthesize [Zn4O(BDC)3]8 and the microscopic mechanism was that the binding force between Zn4O(BDC)3 and NMP molecule was weaker than DMF.展开更多
文摘CO_(2) methanation has a potential in the large-scale utilization of carbon dioxide.It has also been considered to be useful for the renewable energy storage.The commercial pipeline for natural gas transportation can be directly applied for the methane product of CO_(2) methanation.The supported ruthenium(Ru)catalyst has been confirmed to be active and stable for CO_(2) methanation with its high ability in the dissociation of hydrogen and the strong binding of carbon monoxide.CO_(2) methanation over the supported Ru catalyst is structure sensitive.The size of the Ru catalyst and the support have significant effects on the activity and the mechanism.A significant challenge re-mained is the structural controllable preparation of the supported Ru catalyst toward a sufficiently high low-temperature activity.In this review,the recent progresses in the investigations of the supported Ru catalysts for CO_(2) methanation are summarized.The challenges and the future devel-opments are also discussed.
基金supported by the Biotechnology and Biological Sciences Research Council and the Cystic Fibrosis Trust.H Li was supported by EuroCareCF(LSHM-CT-2005-018932)while J-H Chen and Z Xu were supported by scholarships from the University of Bristol and ORS awards from Universities UK.
基金supported by the National Natural Science Foundation of China(No.41174087,41204089)the National Oil and Gas Major Project(No.2011ZX05005-005)
文摘Prestack reverse time migration（PSTM） is a common imaging method; however low-frequency noises reduce the structural imaging precision. Thus, the suppression of migration noises must be considered. The generation mechanism of low-frequency noises is analyzed and the up-, down-, left-, and right-going waves are separated using the Poynting vector of the acoustic wave equation. The computational complexity and memory capacitance of the proposed method are far smaller than that required when using the conventional separation algorithm of 2D Fourier transform. The normalized wavefield separation crosscorrelation imaging condition is used to suppress low-frequency noises in reverse time migration and improve the imaging precision. Numerical experiments using the Marmousi model are performed and the results show that the up-, down-, left-, and right-going waves are well separated in the continuation of the wavefield using the Poynting vector. We compared the imaging results with the conventional method, Laplacian filtering, and wavefield separation with the 2D Fourier transform. The comparison shows that the migration noises are well suppressed using the normalized wavefield separation cross-correlation imaging condition and higher precision imaging results are obtained.
基金supported by the National Natural Science Foundation of China (21507130)the Open Project Program of Chongqing Key Laboratory of Environmental Materials and Remediation Technology from Chongqing University of Arts and Sciences (CEK1405)+3 种基金the Open Project Program of Beijing National Laboratory for Molecular Sciences (20140142)the Open Project Program of Jiangsu Key Laboratory of Vehicle Emissions Control (OVEC001)the Open Project Program of Chongqing Key Laboratory of Catalysis and Functional Organic Molecules from Chongqing Technology and Business University (1456029)the Chongqing Science & Technology Commission (cstc2014pt-gc20002)~~
文摘A series of CeO2‐MnOx‐Al2O3 mixed oxide catalysts （Ce：Mn：Al mole ratio=6：4：x, x=0.25, 0.5, 1, 2） were prepared by a simple one‐step inverse co‐precipitation method to investigate the influence of the incorporation of Al3＋ into CeO2‐MnOx mixed oxides. CeO2‐MnOx, CeO2‐Al2O3, and MnOx‐Al2O3 mixed oxides, and CeO2 were prepared by the same method for comparison. The samples were characterized by XRD, Raman, N2 physisorption, H2‐TPR, XPS, and in situ DRIFTS. The catalytic re‐duction of NO by CO was chosen as a model reaction to evaluate the catalytic performance. The incorporation of a small amount of Al3＋into CeO2‐MnOx mixed oxides resulted in a decrease of crys‐tallite size, with the increase of the BET specific surface area and pore volume, as well as the in‐crease of Ce3＋and Mn4＋. The former benefits good contact between catalyst and reactants, and the latter promotes the adsorption of CO and the desorption, conversion and dissociation of adsorbed NO. All these enhanced the catalytic performance for the NO＋CO model reaction. A reaction mecha‐nism was proposed to explain the excellent catalytic performance of CeO2‐MnOx‐Al2O3 catalysts for NO reduction by CO.
基金Supported by National Barley Industrial Technology System of China(CARS-05)National Natural Science Foundation of China(No.31260326)~~
文摘[Objective] This study aimed to analyze the interaction between genotype of flavonoids of barley grain and environment, to increase the flavonoid content of barley grain in cultivation and breeding. [Method] In this study, the content of cate- chin, myricetin, quercetin and kaempferol of barley grain planted in Kunming, Qujing and Baoshan were determined by HPLC, and the genotype, environment, genotype- environment interaction of the flavonoid content of barley grain were analyzed. [Result] According to the experimental results, the genotype variance, environmental variance and G x E interaction variance of catechin and kaempferol contents show the same trend： genotype variation 〉 environmental variation 〉 G × E interaction variation, which all reach a extremely significant level; the genotype variance, envi- ronmental variance and G × E interaction variance of quercetin and total flavonoid contents show the same trend： genetype variation 〉 G × E interaction variation 〉 environmental variation, which all reach a extremely significant level; the genotype variance and environmental variance of myricetin content both reach a extremely sig- nificant level, while the G × E interaction variance reaches a significant level, showing an order of genotype variation 〉 environmental variation 〉 G × E interaction variation; the genotype variance, environmental variance and G x E interaction vari- ance of total flavonoid content show an order of genotype variation 〉 environmental variation 〉 G × E interaction variation. Among different barley varieties, Ziguang- mangluoerling and Kuanyingdamai in Qujing, Kunming and Baoshan have relatively high content of quercetin, while other barley varieties barely contain any quercetin. The grains of Ziguangmangluoerling and Kuanyingdamai are purple, while the grains of other barley varieties are yellow. [Conclusion] Four main flavonoids and the total flavonoids of barley grain are mainly under genetic control and affected by genetic- environment interactions; the purple barley grains contain high content of quercetin.
基金supported by the National Natural Science Foundation of China (21276169)~~
文摘NaY and ion exchanged NaNH4Y zeolite with NH4NO3 were used as the support to prepare CuY cata‐lysts by a high temperature anhydrous interaction between the support and copper （II） acety‐lacetonate Cu（acac）2. The catalysts were used for the oxidative carbonylation of methanol to dime‐thyl carbonate （DMC） at atmospheric pressure. The textural and acidic properties of NaNH4Y zeolite and the CuY catalysts were investigated by X‐ray diffraction, scanning electron microscopy, N2 ad‐sorption‐desorption, temperature programmed reduction of H2, X‐ray photoelectron spectroscopy and temperature programmed desorption of NH3. With increasing NH4NO3 concentration, the NH4＋exchange degree increased while the crystallinity of the zeolite remained intact. Crystalline CuO was formed when the NH4＋exchange degree of NaNH4Y was low, and the corresponding CuY catalyst showed low catalytic activity. With increasing of the NH4＋exchange degree of NaNH4Y, the content of surface bound Cu＋active centers increased and the catalytic activity of the corresponding CuY catalyst also increased. The surface bound Cu＋content reached its maximum when the NH4＋ex‐change degree of NaNH4Y reached towards saturation. The CuY exhibited optimal catalytic activity with 267.3 mg/（g·h） space time yield of DMC, 6.9%conversion of methanol, 68.5%selectivity of DMC.
基金Project(51104185)supported by the National Natural Science Foundation of ChinaProject(2010QZZD003)supported by the Key Project of Central South University of Fundamental Research Funds for the Central Universities of China
文摘In order to explore the effect mechanism of solvent on the synthesis of the metal organic framework materials, the microscopic interaction between solvent and framework and the effects of N,N-dimethyl-formamide(DMF) or N-methyl- 2-pyrrolidone(NMP) on solvothermal synthesis of [Zn4O(BDC)3]8 were investigated through a combined DFT and experimental study. XRD and SEM showed that the absorbability of NMP in the pore of [Zn4O(BDC)3]8 was weaker than that of DMF. The thermal decomposition temperature of [Zn4O(BDC)3]8 synthesized in DMF was higher than that in NMP according to TG and FT-IR. In addition, the nitrogen sorption isotherms indicated that NMP improved gas sorption property of [Zn4O(BDC)3]8. The COSMO optimized calculations indicated that the total energy of Zn4O(BDC)3 in NMP was higher than that in DMF, and compared with non-solvent system, the charge of zinc atoms decreased and the charge value was the smallest in NMP. Furthermore, the interaction of DMF, NMP or DEF in [Zn4O(BDC)3]8 crystal model was calculated by DFT method. The results suggested that NMP should be easier to be removed from pore of materials than DMF from the point of view of energy state. It can be concluded that NMP was a favorable solvent to synthesize [Zn4O(BDC)3]8 and the microscopic mechanism was that the binding force between Zn4O(BDC)3 and NMP molecule was weaker than DMF.
