Microstructures of creep-aged 2524 （A1-4.3Cu-1.5Mg） aged at 170 ℃ with various stresses （0, 173 and 250 MPa） were studied on a creep machine. Ageing hardness curves under various stresses were plotted and the cor...Microstructures of creep-aged 2524 （A1-4.3Cu-1.5Mg） aged at 170 ℃ with various stresses （0, 173 and 250 MPa） were studied on a creep machine. Ageing hardness curves under various stresses were plotted and the corresponding microstructures were characterized by transmission electron microscopy （TEM）. The results show that the value of peak hardness is increased, while the time to reach the peak hardness is reduced under an external stress. Meanwhile, the length of S（Al2CuMg） phase is shorter and the number density of S phases is larger in the creep-aged alloy. The predominant contribution to the peak hardness can be ascribed to the GPB zones with an elastic stress.展开更多
Microstructure and creep properties of AZ61 alloy containing 1 and 3 wt.% Ca were investigated. The creep properties were examined using impression method under different stresses between 200 and 500 MPa at the temper...Microstructure and creep properties of AZ61 alloy containing 1 and 3 wt.% Ca were investigated. The creep properties were examined using impression method under different stresses between 200 and 500 MPa at the temperature ranging from 423 to 491 K. The microstructure of AZ61 alloy contains α(Mg) matrix and Mg17 Al12 intermetallic phases. It is shown that adding Ca to AZ61 alloy reduces the amount of Mg17 Al12 phase via forming(Mg,Al)2 Ca phase;furthermore, increasing the Ca content to 3 wt.% leads to the formation of(Mg,Al)2 Ca phase, as well as the elimination of the Mg17 Al12 phase. Creep properties of AZ61 alloy are improved with the Ca addition. The improvement in creep properties is attributed to the reduction in the amount of Mg17 Al12 phase and the formation of(Mg,Al)2 Ca phase with high thermal stability. According to the obtained creep data, it is concluded that the pipe diffusion-climb controlled dislocation creep is the dominant creep mechanism and Ca addition has no influence on this mechanism. The effect of pre-deformation on the creep properties of AZ61+3%Ca alloy reveals that the creep resistance of the alloy depends on the continuity of(Mg,Al)2 Ca phase. It is decreased by reducing the phase continuity.展开更多
基金Project (2009BAG12A07-B02) supported by the National Science & Technology Pillar Program during the 11th Five-Year Plan Period,ChinaProject supported by Innovative Research Team in University of Liaoning Province,ChinaProject (51001022) supported by the National Natural Science Foundation of China
文摘Microstructures of creep-aged 2524 （A1-4.3Cu-1.5Mg） aged at 170 ℃ with various stresses （0, 173 and 250 MPa） were studied on a creep machine. Ageing hardness curves under various stresses were plotted and the corresponding microstructures were characterized by transmission electron microscopy （TEM）. The results show that the value of peak hardness is increased, while the time to reach the peak hardness is reduced under an external stress. Meanwhile, the length of S（Al2CuMg） phase is shorter and the number density of S phases is larger in the creep-aged alloy. The predominant contribution to the peak hardness can be ascribed to the GPB zones with an elastic stress.
文摘Microstructure and creep properties of AZ61 alloy containing 1 and 3 wt.% Ca were investigated. The creep properties were examined using impression method under different stresses between 200 and 500 MPa at the temperature ranging from 423 to 491 K. The microstructure of AZ61 alloy contains α(Mg) matrix and Mg17 Al12 intermetallic phases. It is shown that adding Ca to AZ61 alloy reduces the amount of Mg17 Al12 phase via forming(Mg,Al)2 Ca phase;furthermore, increasing the Ca content to 3 wt.% leads to the formation of(Mg,Al)2 Ca phase, as well as the elimination of the Mg17 Al12 phase. Creep properties of AZ61 alloy are improved with the Ca addition. The improvement in creep properties is attributed to the reduction in the amount of Mg17 Al12 phase and the formation of(Mg,Al)2 Ca phase with high thermal stability. According to the obtained creep data, it is concluded that the pipe diffusion-climb controlled dislocation creep is the dominant creep mechanism and Ca addition has no influence on this mechanism. The effect of pre-deformation on the creep properties of AZ61+3%Ca alloy reveals that the creep resistance of the alloy depends on the continuity of(Mg,Al)2 Ca phase. It is decreased by reducing the phase continuity.
