Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were wa...Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were water, 80%(v/v) ethanol, 1 mol/L Na Cl,2% HAc and 0.6 mol/L HCl. Zn, Cd and Cu in the extracts and samples were measured by flame atomic adsorption spectrometry. In sequential extraction procedures, water soluble form and ethanol soluble form are the main fractions for Zn, while water soluble form and Na Cl soluble form for Cd, and comparatively uniform distribution for Cu with the residue form most and HCl soluble form second. Single extraction procedures are used to compare the extraction efficiencies of the five reagents to screen appropriate extractants and operating conditions for liquid extraction to deal with large amount of harvested metal-contained biomass, which will pose a threat to the environment if treated improperly. The sequences of extraction efficiencies are HCl>Na Cl≈HAc>Water≈Ethanol for Zn and HCl≈Na Cl≈HAc>Water>Ethanol for Cd. As for Cu, all the five extractants cannot effectively extract Cu, but HCl achieves a higher efficiency(>70% in fresh samples, and 45%-60% in dried samples). Besides, extraction efficiencies for most extractants in fresh samples are higher than those in dried samples, and extraction efficiencies of stems and leaves for the five extractants are close. The two extraction procedures can obtain high degree of accuracy with the relative standard deviation(RSD)lower than 10%, and metal recoveries are controlled between 80%-120% with most of 90%-110%.展开更多
This paper investigates the effect of drying environment, i.e. temperature and relative humidity, on the engineering properties and microscopic pore size distribution of an expansive soil. The shrinkage tests under di...This paper investigates the effect of drying environment, i.e. temperature and relative humidity, on the engineering properties and microscopic pore size distribution of an expansive soil. The shrinkage tests under different drying temperatures and relative humidity are carried out in a constant climate chamber. Then, the undisturbed samples, prepared in different drying environment, are used for the triaxial tests and mercury intrusion tests. It is found that the drying environment has noticeable influence on the engineering properties of expansive soils and it can be characterized by the drying rate. The linear shrinkage and strength increase with the decrease of the drying rate. The non-uniform deformation tends to happen in the high drying rate, which subsequently furthers the development of cracks. In addition, during the drying process, the variation of pores mainly focuses on the inter-aggregate pores and inter-particle pores. The lower drying rate leads to larger variation of pore size distribution.展开更多
The decoherence process is analyzed for an open quantum system that is classically chaotic,with a classicallinear frequency entropy developed to measure the stability of classical motion,Investigation shows that the d...The decoherence process is analyzed for an open quantum system that is classically chaotic,with a classicallinear frequency entropy developed to measure the stability of classical motion,Investigation shows that the decoherencemeasured by the rate of quantum linear entropy production varies significantly with both the underlying classical orbitsand the classical linear frequency entropy.Such correspondence is also supported by the further investigation on theLoschmidt Echo.展开更多
基金Project(2013CB228106)supported by the National Key Basic Research Program of ChinaProject(2012AA06A204)supported by the National High Technology Research and Development Program of China
文摘Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were water, 80%(v/v) ethanol, 1 mol/L Na Cl,2% HAc and 0.6 mol/L HCl. Zn, Cd and Cu in the extracts and samples were measured by flame atomic adsorption spectrometry. In sequential extraction procedures, water soluble form and ethanol soluble form are the main fractions for Zn, while water soluble form and Na Cl soluble form for Cd, and comparatively uniform distribution for Cu with the residue form most and HCl soluble form second. Single extraction procedures are used to compare the extraction efficiencies of the five reagents to screen appropriate extractants and operating conditions for liquid extraction to deal with large amount of harvested metal-contained biomass, which will pose a threat to the environment if treated improperly. The sequences of extraction efficiencies are HCl>Na Cl≈HAc>Water≈Ethanol for Zn and HCl≈Na Cl≈HAc>Water>Ethanol for Cd. As for Cu, all the five extractants cannot effectively extract Cu, but HCl achieves a higher efficiency(>70% in fresh samples, and 45%-60% in dried samples). Besides, extraction efficiencies for most extractants in fresh samples are higher than those in dried samples, and extraction efficiencies of stems and leaves for the five extractants are close. The two extraction procedures can obtain high degree of accuracy with the relative standard deviation(RSD)lower than 10%, and metal recoveries are controlled between 80%-120% with most of 90%-110%.
基金financially supported by the National Natural Science Foundation of China (Grant No. 41430634)the State Key Laboratory of Geomechanics and Geotechnical Engineering (Grant No. Y11002)
文摘This paper investigates the effect of drying environment, i.e. temperature and relative humidity, on the engineering properties and microscopic pore size distribution of an expansive soil. The shrinkage tests under different drying temperatures and relative humidity are carried out in a constant climate chamber. Then, the undisturbed samples, prepared in different drying environment, are used for the triaxial tests and mercury intrusion tests. It is found that the drying environment has noticeable influence on the engineering properties of expansive soils and it can be characterized by the drying rate. The linear shrinkage and strength increase with the decrease of the drying rate. The non-uniform deformation tends to happen in the high drying rate, which subsequently furthers the development of cracks. In addition, during the drying process, the variation of pores mainly focuses on the inter-aggregate pores and inter-particle pores. The lower drying rate leads to larger variation of pore size distribution.
基金Supported by National Natural Science Foundation of China under Grant Nos.10375042 and 10875087
文摘The decoherence process is analyzed for an open quantum system that is classically chaotic,with a classicallinear frequency entropy developed to measure the stability of classical motion,Investigation shows that the decoherencemeasured by the rate of quantum linear entropy production varies significantly with both the underlying classical orbitsand the classical linear frequency entropy.Such correspondence is also supported by the further investigation on theLoschmidt Echo.
