In comparison to discrete descriptions of fracture process,the recently proposed phase field methodology averts the numerical tracking strategy of discontinuities in solids,which enables the numerical implement simpli...In comparison to discrete descriptions of fracture process,the recently proposed phase field methodology averts the numerical tracking strategy of discontinuities in solids,which enables the numerical implement simplification.An implicit finite element formulation based on the diffuse phase field is extended for stable and efficient analysis of complex dynamic fracture process in ductile solids.This exhibited formulation is shown to capture entire range of the characteristics of ductile material presenting J2-plasticity,embracing plasticization,cracks initiation,propagation,branching and merging while fulfilling the basic principle of thermodynamics.Herein,we implement a staggered time integration scheme of the dynamic elasto-plastic phase field method into the commercial finite element code.The numerical performance of the present advanced phase field model has been examined through several classic dynamic fracture benchmarks,and in all cases simulation results are in good agreement with the associated experimental data and other numerical results in previous literature.展开更多
Materials with low thermal conductivity are applied extensively in energy management,and breaking the amorphous limits of thermal conductivity to solids has attracted widespread attention from scientists.Doping is a c...Materials with low thermal conductivity are applied extensively in energy management,and breaking the amorphous limits of thermal conductivity to solids has attracted widespread attention from scientists.Doping is a common strategy for achieving low thermal conductivity that can offer abundant scattering centers in which heavier dopants always result in lower phonon group velocities and lower thermal conductivities.However,the amount of equivalent heavyatom single dopant available is limited.Unfortunately,nonequivalent heavy dopants have finite solubility because of charge imbalance.Here,we propose a charge balance strategy for SnS by substituting Sn2+with Ag^(+)and heavy Bi^(3+),improving the doping limit of Ag from 2%to 3%.Ag and Bi codoping increases the point defect concentration and introduces abundant boundaries simultaneously,scattering the phonons at both the atomic scale and nanoscale.The thermal conductivity of Ag0.03Bi0.03Sn0.94S decreased to 0.535 W·m^(−1)·K^(−1)at room temperature and 0.388 W·m^(−1)·K^(−1)at 275°C,which is below the amorphous limit of 0.450 W·m^(−1)·K^(−1)for SnS.This strategy offers a simple way to enhance the doping limit and achieve ultralow thermal conductivity in solids below the amorphous limit without precise structural modification.展开更多
Genetic similarities of 13 inbred lines of maize (Zea mays L.) were analyzed by restriction fragment length polymorphisms (RFLPs). The objectives of the study were to detect genetic similarities among 13 inbreds and t...Genetic similarities of 13 inbred lines of maize (Zea mays L.) were analyzed by restriction fragment length polymorphisms (RFLPs). The objectives of the study were to detect genetic similarities among 13 inbreds and to assign them to heterotic groups. By means of 24 probe_enzyme combinations (PECs) selected for locus specificity, clear patterns and reproducibility, 85 alleles were found with an average of 3.3 alleles per locus. The allelic frequency data were used to estimate genetic similarities among lines, and as a result the diversity index of 0.499 was obtained. Genetic similarities between the pairs of 13 lines ranged from 0.523 up to 0.802 with an average of 0.649. The UPGMA clustering algorithm analysis classified the 13 lines into five groups, which generally corresponded to known maize heterotic groups based on pedigree information. The authors concluded that RFLP_based markers could be used for investigating genetic relationships between maize inbred lines and assigning them to heterotic groups, but it seemed that a large number of PECs were needed to obtain reliable estimates of genetic similarity.展开更多
[Objective] This study aimed to investigate the genetic effects and heterosis of plant height and internode traits of japonica-indica hybrid rice. [Methed] Incomplete diallel crosses were made between six japonica CMS...[Objective] This study aimed to investigate the genetic effects and heterosis of plant height and internode traits of japonica-indica hybrid rice. [Methed] Incomplete diallel crosses were made between six japonica CMS lines and nine indica widecompatibility restorer lines; the genetic effects of plant height and internode traits of japonica-indica hybrid rice were analyzed using the additive-dominance genetic model. [Result] The ple, nt height, panicle length and the length of internode 1 of japonica-in- dica hybrid rice were mainly controlled by the additive effects; but the length of in- ternode 3, internode 4 and internode 5 were mainly controlled by dominance effects. Both the narrow sense heritability and broad sense heritability of plant height, panicle length, number of elongated internodes and length of most internodes reached signifi- cance level. The positive phenotypic correlation, genetic correlation, additive correla- tion and dominance correlation between plant height and panicle length, number of e- longated internodes and internode length were significant; and most of the other paired traits were significantly positively correlated. Heterosis analysis showed that the positive heterosis value over mid-parent and positive heterosis value over better- parent of the length of internode 3, internode 4, internode 5 and internode 6 reached significant level, and the heterosis value over mid-parent of plant height reached extreme significance level. [Conclusion] This study will provide reliable theoretical basis for the genetic improvement and heterosis utilization of plant height and internode traits in japonica-indica hybrid rice.展开更多
基金supported by the Na⁃tional Natural Science Foundation of China(No.12302176).
文摘In comparison to discrete descriptions of fracture process,the recently proposed phase field methodology averts the numerical tracking strategy of discontinuities in solids,which enables the numerical implement simplification.An implicit finite element formulation based on the diffuse phase field is extended for stable and efficient analysis of complex dynamic fracture process in ductile solids.This exhibited formulation is shown to capture entire range of the characteristics of ductile material presenting J2-plasticity,embracing plasticization,cracks initiation,propagation,branching and merging while fulfilling the basic principle of thermodynamics.Herein,we implement a staggered time integration scheme of the dynamic elasto-plastic phase field method into the commercial finite element code.The numerical performance of the present advanced phase field model has been examined through several classic dynamic fracture benchmarks,and in all cases simulation results are in good agreement with the associated experimental data and other numerical results in previous literature.
基金supported by the CAS Project for Young Scientists in Basic Research(YSBR-070)the National Natural Science Foundation of China(21925110,21890750,U2032161,12147105)+8 种基金the USTC Research Funds of the Double First-Class Initiative(YD2060002004)the National Key Research and Development Program of China(2022YFA1203600,2022YFA1203601,2022YFA1203602)the Natural Science Foundation of China-Anhui Joint Fund(U23A20121)the Outstanding Youth Foundation of Anhui Province(2208085J14)the Anhui Provincial Key Research and Development Project(202004a050200760)the Key R&D Program of Shandong Province(2021CXGC010302)the Users with Excellence Project of Hefei Science Center CAS(2021HSC-UE004)the Fellowship of the China Postdoctoral Science Foundation(2022M710141)the open foundation of the Key Laboratory of the Engineering Research Center of Building Energy Efficiency Control and Evaluation,Ministry of Education(AHJZNX-2023-04).
文摘Materials with low thermal conductivity are applied extensively in energy management,and breaking the amorphous limits of thermal conductivity to solids has attracted widespread attention from scientists.Doping is a common strategy for achieving low thermal conductivity that can offer abundant scattering centers in which heavier dopants always result in lower phonon group velocities and lower thermal conductivities.However,the amount of equivalent heavyatom single dopant available is limited.Unfortunately,nonequivalent heavy dopants have finite solubility because of charge imbalance.Here,we propose a charge balance strategy for SnS by substituting Sn2+with Ag^(+)and heavy Bi^(3+),improving the doping limit of Ag from 2%to 3%.Ag and Bi codoping increases the point defect concentration and introduces abundant boundaries simultaneously,scattering the phonons at both the atomic scale and nanoscale.The thermal conductivity of Ag0.03Bi0.03Sn0.94S decreased to 0.535 W·m^(−1)·K^(−1)at room temperature and 0.388 W·m^(−1)·K^(−1)at 275°C,which is below the amorphous limit of 0.450 W·m^(−1)·K^(−1)for SnS.This strategy offers a simple way to enhance the doping limit and achieve ultralow thermal conductivity in solids below the amorphous limit without precise structural modification.
文摘Genetic similarities of 13 inbred lines of maize (Zea mays L.) were analyzed by restriction fragment length polymorphisms (RFLPs). The objectives of the study were to detect genetic similarities among 13 inbreds and to assign them to heterotic groups. By means of 24 probe_enzyme combinations (PECs) selected for locus specificity, clear patterns and reproducibility, 85 alleles were found with an average of 3.3 alleles per locus. The allelic frequency data were used to estimate genetic similarities among lines, and as a result the diversity index of 0.499 was obtained. Genetic similarities between the pairs of 13 lines ranged from 0.523 up to 0.802 with an average of 0.649. The UPGMA clustering algorithm analysis classified the 13 lines into five groups, which generally corresponded to known maize heterotic groups based on pedigree information. The authors concluded that RFLP_based markers could be used for investigating genetic relationships between maize inbred lines and assigning them to heterotic groups, but it seemed that a large number of PECs were needed to obtain reliable estimates of genetic similarity.
基金Supported by National High Technology Research and Development Program of China(863Program,2010AA101301)Chinese Super Rice Breeding and Experiment Demonstration Program,Ministry of Agriculture+1 种基金the 0406 Program of zhejiang ProvinceScientific Research Fund of China National Rice Research Institute(2009RG001-5)~~
文摘[Objective] This study aimed to investigate the genetic effects and heterosis of plant height and internode traits of japonica-indica hybrid rice. [Methed] Incomplete diallel crosses were made between six japonica CMS lines and nine indica widecompatibility restorer lines; the genetic effects of plant height and internode traits of japonica-indica hybrid rice were analyzed using the additive-dominance genetic model. [Result] The ple, nt height, panicle length and the length of internode 1 of japonica-in- dica hybrid rice were mainly controlled by the additive effects; but the length of in- ternode 3, internode 4 and internode 5 were mainly controlled by dominance effects. Both the narrow sense heritability and broad sense heritability of plant height, panicle length, number of elongated internodes and length of most internodes reached signifi- cance level. The positive phenotypic correlation, genetic correlation, additive correla- tion and dominance correlation between plant height and panicle length, number of e- longated internodes and internode length were significant; and most of the other paired traits were significantly positively correlated. Heterosis analysis showed that the positive heterosis value over mid-parent and positive heterosis value over better- parent of the length of internode 3, internode 4, internode 5 and internode 6 reached significant level, and the heterosis value over mid-parent of plant height reached extreme significance level. [Conclusion] This study will provide reliable theoretical basis for the genetic improvement and heterosis utilization of plant height and internode traits in japonica-indica hybrid rice.
