期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
金属增材制造条件下二元合金三维微观组织的相场法-有限元法预测 被引量:1
1
作者 曹流 孟瑞繁 +1 位作者 张沁丹 张珞 《铸造》 CAS 北大核心 2023年第4期365-374,共10页
基于开源相场法代码PRISMS-PF所提供的相场法-有限元法计算架构,开展了A356铝合金MAM过程的模拟仿真研究。计算分析了工艺参数(温度梯度与扫描速率)以及初始固相形貌对溶质浓度、一次枝晶臂间距和晶粒形貌的影响,再现了微观偏析、晶粒... 基于开源相场法代码PRISMS-PF所提供的相场法-有限元法计算架构,开展了A356铝合金MAM过程的模拟仿真研究。计算分析了工艺参数(温度梯度与扫描速率)以及初始固相形貌对溶质浓度、一次枝晶臂间距和晶粒形貌的影响,再现了微观偏析、晶粒竞争生长以及二次枝晶臂等现象,并与实验结果进行了对比验证。对比不同工艺参数(温度梯度与扫描速率)情形下的预测结果,发现一次枝晶臂间距随温度梯度与扫描速率乘积的减小而增大,而随着温度梯度与扫描速率的比值逐渐减小,晶粒形貌由平面晶逐渐向胞状晶、柱状晶以及树枝晶转变。对比不同初始固相形貌情形下的预测结果,发现当温度梯度与扫描速率的比值较小时,即液-固界面前沿的成分过冷区越大时,非平整的初始固相形貌对晶粒生长过程造成的影响越明显。 展开更多
关键词 金属增材制造 -有限元 温度梯度 扫描速率 一次枝晶臂间距
下载PDF
Phase-field simulation of dendritic sidebranching induced by thermal noise
2
作者 朱昌盛 王智平 +1 位作者 荆涛 柳百成 《中国有色金属学会会刊:英文版》 CSCD 2004年第6期1106-1110,共5页
The influence of undercooling and noise magnitude on dendritic sidebranching during crystal growth was investigated by simulation of a phase-field model which incorporates thermal noise. It is shown that, the sidebran... The influence of undercooling and noise magnitude on dendritic sidebranching during crystal growth was investigated by simulation of a phase-field model which incorporates thermal noise. It is shown that, the sidebranching is not influenced with inclusion of the nonconserved noise, therefore, in order to save the computational costs it is often neglected; while conserved noise drives the morphological instability and is dominant origin of sidebranching. The dependence of temperature field on magnitude of thermal noise is apparent, when F_u gets an appropriate value, noise can induce sidebranching but not influence the dendritic tip operating state. In the small undercooled melt, the thermal diffusion layer collected around the dendrite is thick, which suppresses the growth of its sidebranching and makes the dendrite take on the morphology of no sidebranching, but when the undercooling is great, the thermal diffusion layer is thin, which is advantageous to the growth of the sidebranching and the dendrite presents the morphology of the developed sidebranching. 展开更多
关键词 相-场法 热噪声 冷却过度 枝晶分边 数值仿真 合金结构
下载PDF
超薄Inconel 718镍基合金板焊接凝固过程中微观组织变化的预测
3
作者 金铄德 何建萍 +1 位作者 吴鑫 吉永丰 《热处理》 CAS 2023年第3期25-31,共7页
以不同的占空比、基值电流、峰值电流和脉冲频率对0.1 mm厚Inconel 718合金板进行了脉冲微束等离子弧焊(pulse microplasma arc welding,P-MPAW)。对焊接凝固过程中超薄版的微观组织的变化进行了数值模拟。采用Fluent软件对焊接过程中... 以不同的占空比、基值电流、峰值电流和脉冲频率对0.1 mm厚Inconel 718合金板进行了脉冲微束等离子弧焊(pulse microplasma arc welding,P-MPAW)。对焊接凝固过程中超薄版的微观组织的变化进行了数值模拟。采用Fluent软件对焊接过程中超薄板的温度场变化进行了模拟,并与采用MATLAB软件建立的微观组织变化模型进行耦合,以预测超薄Inconel 718合金板在脉冲微束等离子弧焊接凝固过程的微观组织变化。结果表明:占空比对焊缝边缘柱状晶二次枝晶和焊缝中心等轴晶一次枝晶的生长均有明显影响;脉冲频率和基值电流均影响柱状晶和等轴晶晶粒的平均尺寸;模拟的和试验获得的柱状晶和等轴晶晶粒平均尺寸相接近,说明采用该模型分析P-MPAW焊接超薄Inconel 718合金板时在凝固过程中微观组织的变化是可行的。 展开更多
关键词 元胞自动机- 数值模拟 微观组织 脉冲微束等离子弧焊
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部