《西山真夫子年谱》正误

真采于乾隆甲申年修成的《西山真夫子年谱》,为有关真德秀生平事迹的现存唯一年谱。该年谱虽有一定的史料价值,但也确实存在着不少讹误,需进行梳理和分析,以有助于对真德秀文献的解读。

Design of high-speed signal acquisition system and analysis of signal integrity

The device is used for the test on the fuze detonating time according to the initial velocity of the projectile and the altitude and speed of enemy aircraft flight. For the special requirements of the high-speed signal acquisition in the process, the characteristics of the measured signal are analyzed. The system is investigated in chip selection, signal transmission, signal processing, signal storage, post-production PCB design, etc. The appropriate measures and solutions which affect the integrity and accuracy of the signal in each process are proposed. The rules for the layout of the device and wiring are made. The result show that the measurement values are accurate without loss of data.

DIGITAL FILTER FOR SINGLE FREQUENCY SINUSOID SERIES

The sinusoid curve fit is widely applied in the evaluation of digitized measurement equipment, such as data acquisition system, digital storage oscilloscope, waveform recorder and A/D converter,etc. Because of the distortion and noise of sinusoid signal generator, the digitizing and the non linearity errors in measurement, it is impossible to avoid the distortion and the noise in sinusoid sampling series. The distortion and the noise limit the accuracy of curve fit results. Therefore, it is desirable to find a filter that can filter out both distortion and noise of the sinusoid sampling series, and in the meantime, the filter doesn′t influence the amplitude, the frequency, the phase and DC bias of fitting curve of the sine wave. And then, the uncertainty of fitting parameter can be reduced. This filter is designed and realized. Its realization in time domain is described and its transfer function in frequency domain is presented.

DISTRIBUTED SIMULATION SYSTEM BASED ON UNIVERSAL COMPONENTS

Based on MATRIXx, a universal real-time visual distributed simulation system is developed. The system can receive different input data from network or local terminal. Application models in the simulation modules can automatically get such data to be analyzed and calculated, and then produce real-time simulation control information. Meanwhile, this paper designs relevant simulation components to implement the input and output data, which can guarantee the real-time and universal of the data transmission. Result of the experimental system shows that the real-time performance of the simulation is perfect.

Nanofiber-based enrichment device for sampling organic contaminants in vacuum environment

A novel method for sampling and enriching organic volatile contaminants in the vacuum environment combined with qualitative analysis based on the vacuum simulation test is proposed. A nanofiber is used as absorbent to collect the organic volatile contaminants in the vacuum environment and then eluted by methanol. The eluent is analyzed by gas chromatography （ GC ） and gas chromatography-mass spectrometry （GC/MS） to identify the composition of the organic contaminants. The nanofiber is composed of polystyrene and it is prepared by electrospinning. Before being used, the nanofiber is processed by ultrasound in ethanol for 15 min to remove some impurities and dried in an oven at 60 ℃, and then 10 mg of the nanofiber is wrapped in a thermoplastic polyester fabric pocket. The vacuum pump oil and di-iso-decyl phthalate （DIDP） are chosen as absorbates to test the absorbent performance of the nanofiber in the vacuum environment. Experiments are performed under the pressure of 10-4 and 103 Pa, respectively. It is shown that the nanofiber-based enrichment device can be used to adsorb the organic contaminants in the vacuum simulation environment.

Simulation and Fabrication of Sampled Fiber Bragg Grating

The calculation principle of sampled FBG, which is called transfer matrix method, is analyzed and the simulation software is designed. The sampled FBG is simulated with the software we designed and is fabricated by ourselves.The experiment result fits well with the simulated one.It is concluded that to improve the refractive modulation index is an effective way to fabricate a sampled FBG with high-reflectivity.

Optimization of the catch bench design using a genetic algorithm

Rockfalls are one of the hazards that may be associated with open pit mining. The majority of rockfalls occur due to the existing conditions of slopes, such as back break, fractures and joints. Constructing a berm on the catch bench is a popular method for the mitigation of rockfall hazards in open pit mining.The width of the catch bench and the height of the berm play a major role in the open pit bench design.However, there is no systematic method currently available to optimize the size of these parameters. This study proposes a novel methodology which calculates the optimum catch bench width by integrating the rockfall simulation model and genetic algorithm into a Simulation-Optimization Model. The proposed methodology is useful when used to determine the minimum catch bench width, or the maximum overall slope angle, insuring that a sufficient factor of safety of the slope is included while maximizing the overall profitability of the open pit mine.

Design and implementation of model test installation of heave compensation system of deepsea mining

In order to validate the simulation model and develop heave compensation control strategy,heave compensation model tests were performed.The model test installation includes themining ship motion simulator,the heave compensation system,the lifting pipe simulator,the buffer simulator and the water pool.The tests ofmining ship motion simulator show that it is able to perform under the predetermined attitude path smoothly and can meet the requirements of themining ship motions.The heave compensation effect is more than 60% under random wave and the goal is set to be 50%.The model test results indicate that this heave compensation system is effective and feasible.

Fractionally Spaced Equalization Algorithms in 60GHz Communication System

Several fractionally spaced equalizers(FSE) which could be used in 60 GHz systems are presented in this paper. For 60 GHz systems, low-power equalization algorithms are favorable. We focus on FSE in both time domain(TD) and frequency domain(FD) in order to meet different complexity requirements of 60 GHz systems. Compared with symbol spaced equalizer(SSE), FSE can relax the requirement of sampling synchronization hardware significantly. Extensive simulation results show that our equalization algorithms not only eliminate ISI efficiently, but are also robust to timing synchronization errors.

Modeling and simulation of strata movement for protective seam mining with large interburden

Based on simulated material scale modeling and numerical simulation, the protective seam mining method was conducted at one coal mine. After extracting the No.15seam, the overlying strata movement and the deformation of the No.9-10 protected seamwere studied. The experiment results show that it is feasible to destress the protectedseams with large interburden thickness. When the face had advanced 200 m from thesetup room, the No.9-10 seam was fully destressed, resulting in easy gas drainage in thedestressed zone. Recommendations on mining sequence of multiple seams mining in thesame coal areas were made.

Dominant edge direction based fast intra mode decision in the H.264/AVC encoder

The H.264/AVC video coding standard uses an intra prediction mode with 4×4 and 16×16 blocks for luma and 8×8 blocks for chroma. This standard uses the rate distortion optimization (RDO) method to determine the best coding mode based on the compression performance and video quality. This method offers a large improvement in coding efficiency compared to other compression standards, but the computational complexity is greater due to the various intra prediction modes. This paper proposes a fast intra mode decision algorithm for real-time encoding of H.264/AVC based on the dominant edge direction (DED). The DED is extracted using pixel value summation and subtraction in the horizontal and vertical directions. By using the DED, three modes instead of nine are chosen for RDO calculation to decide on the best mode in the 4×4 luma block. For the 16×16 luma and the 8×8 chroma, only two modes are chosen instead of four. Experimental results show that the entire encoding time saving of the proposed algorithm is about 67% compared to the full intra search method with negligible loss of quality.

A novel chromatic dispersion monitoring method for 1 024 QAM fiber-optic system based on asynchronous amplitude sampling

A new chromatic dispersion(CD) monitoring method is proposed, and the CD monitoring is achieved on the whole range of 0—600 ps/nm. A dual-polarization(DP)-1 024 quadrature amplitude modulation(QAM) 400 Gbit/s CD monitoring system is built using OptiS ystem14.0 software. With different optical signal to noise ratio(OSNR) values, different filter bandwidths or different duty cycles, the simulations are carried out. The simulation results show that this new CD monitoring method can be less affected by noise and has a high tolerance for different filter bandwidths. At the same time, this method can do effective CD monitoring on the signal with duty cycle greater than 80%. A high sensitivity in 0—200 ps/nm can be achieved using this CD monitoring method. The technique supports a wide range of data traffic and enhances operation flexibility of optical networks.