Transient performance of fluid machinery during transient operating periods, such as startup and stopping, has been drawn more attentions recently due to the growing engineering needs. In this paper, the transient beh...Transient performance of fluid machinery during transient operating periods, such as startup and stopping, has been drawn more attentions recently due to the growing engineering needs. In this paper, the transient behavior of a prototype centrifugal pump with an open impeller during rapid startup period is studied experimentally. The variations of the rotational speed, flow rate, head, and shaft power during rapid startup period are recorded in ex- periments at different discharge valve openings. In addition, the non-dimensional flow rate and head are also used to analyze the transient behavior. The research result shows that the rise characteristic of the rotational speed is not basically changed by working points, while mainly depends on the startnp characteristics of the driving motor. Compared with the rapid rise of the rotational speed, the flow rate rises slowly in the initial stage of startup. Moreover, the flow rate lags behind the rotational speed to rise to final stable value, and the delay becomes more severe with the increase of the discharge valve opening. The shaft power impact phenomenon generally exists in the process of startup. The non-dimensional analysis shows that the non-dimensional head is very high at the very beginning of startup, and quickly falls to the minimum, then gradually rises to final stable value, while the non-dimensional flow rate always shows the rise tendency during whole startup period. In conclusion, it is found from the non-dimensional results that the quasi-steady analysis is unable to accurately assess the transient flow during startup period.展开更多
Instability of pump turbine with S-shaped curve is characterized by large fluctuations of rotational speed during the transient processes.For investigating this phenomenon,a numerical model based on the dynamic slidin...Instability of pump turbine with S-shaped curve is characterized by large fluctuations of rotational speed during the transient processes.For investigating this phenomenon,a numerical model based on the dynamic sliding mesh method(DSSM)is presented and used to numerically solve the 3D transient flow which is characterized by the variable rotation speed of runner.The method is validated by comparison with measured data for a load rejection process in a prototype pump turbine.The results show that the calculated rotation speed agrees well with the experimental data.Based on the validated model,simulations were performed for the runaway process using an artificially assumed operating condition under which the unstable rotation speed is expected to appear.The results confirm that the instability of runner rotational speed can be effectively captured with the proposed method.Presented results include the time history profiles of unit flow rate and unit rotating speed.The internal flow characteristics in a typical unstable period are discussed in detail and the mechanism of the unstable hydraulic phenomenon is explained.Overall,the results suggest that the method presented here can be a viable alternative to predict the dynamic characteristics of pump turbines during transient processes.展开更多
基金supported by the National Natural Science Foundation of China(No.21076198,51249003)the National Basic Research Program ("973" Program,No.2009CB724303)
文摘Transient performance of fluid machinery during transient operating periods, such as startup and stopping, has been drawn more attentions recently due to the growing engineering needs. In this paper, the transient behavior of a prototype centrifugal pump with an open impeller during rapid startup period is studied experimentally. The variations of the rotational speed, flow rate, head, and shaft power during rapid startup period are recorded in ex- periments at different discharge valve openings. In addition, the non-dimensional flow rate and head are also used to analyze the transient behavior. The research result shows that the rise characteristic of the rotational speed is not basically changed by working points, while mainly depends on the startnp characteristics of the driving motor. Compared with the rapid rise of the rotational speed, the flow rate rises slowly in the initial stage of startup. Moreover, the flow rate lags behind the rotational speed to rise to final stable value, and the delay becomes more severe with the increase of the discharge valve opening. The shaft power impact phenomenon generally exists in the process of startup. The non-dimensional analysis shows that the non-dimensional head is very high at the very beginning of startup, and quickly falls to the minimum, then gradually rises to final stable value, while the non-dimensional flow rate always shows the rise tendency during whole startup period. In conclusion, it is found from the non-dimensional results that the quasi-steady analysis is unable to accurately assess the transient flow during startup period.
基金supported by the National Basic Research Program of China(Grant No.2009CB724302)the National Natural Science Foundation of China(Grant No.51176168)
文摘Instability of pump turbine with S-shaped curve is characterized by large fluctuations of rotational speed during the transient processes.For investigating this phenomenon,a numerical model based on the dynamic sliding mesh method(DSSM)is presented and used to numerically solve the 3D transient flow which is characterized by the variable rotation speed of runner.The method is validated by comparison with measured data for a load rejection process in a prototype pump turbine.The results show that the calculated rotation speed agrees well with the experimental data.Based on the validated model,simulations were performed for the runaway process using an artificially assumed operating condition under which the unstable rotation speed is expected to appear.The results confirm that the instability of runner rotational speed can be effectively captured with the proposed method.Presented results include the time history profiles of unit flow rate and unit rotating speed.The internal flow characteristics in a typical unstable period are discussed in detail and the mechanism of the unstable hydraulic phenomenon is explained.Overall,the results suggest that the method presented here can be a viable alternative to predict the dynamic characteristics of pump turbines during transient processes.
