Isothermal solidification process of a dissimilar transient liquid phase （TLP） bonding of FSX-414/MBF80/IN738 system was simulated by finite difference method. The TLP joint model was divided into two parts and a mo...Isothermal solidification process of a dissimilar transient liquid phase （TLP） bonding of FSX-414/MBF80/IN738 system was simulated by finite difference method. The TLP joint model was divided into two parts and a moving liquid /solid interface model was used for the parts. Diffusion equations were solved for each half of the joints simultaneously up to the end of isothermal solidification. The completion time of isothermal solidification, concentration profiles and position of the solid/liquid interface for each half were calculated. The intersection of the solid/liquid interfaces of two halves was considered the end of isothermal solidification. To obtain some required diffusion data, TLP bonding of FSX-414/MBF80/IN738 was performed at different temperature and time under vacuum atmosphere. The calculated results show good agreement with the experimental results.展开更多
Modelling and simulations are conducted on velocity slip and interfacial momentum transfer for supersonic two-pha.se (gas-droplet) flow in the transient section inside and outside a Laval jet(LJ). The initial velocity...Modelling and simulations are conducted on velocity slip and interfacial momentum transfer for supersonic two-pha.se (gas-droplet) flow in the transient section inside and outside a Laval jet(LJ). The initial velocity slip between gas and droplets causes an interfacial momentum transfer flux as high as (2.0-5.0) x 104 Pa. The relaxation time corresponding to this transient process is in the range of 0.015-0.090ms for the two-phase flow formed inside the LJ and less than 0.5ms outside the LJ. It demonstrates the unique performance of this system for application to fast chemical reactions using electrically active media with a lifetime in the order of 1 ms. Through the simulations of the transient processes with initial Mach number Mg from 2.783 to 4.194 at different axial positions inside the LJ, it is found that Mg has the strongest effect on the process. The momentum flux increases as the Mach number decreases. Due to compression by the shock wave at the end of the LJ, the flow pattern becomes two dimensional and viscous outside the LJ. Laser Doppler velocirneter (LDV) measurements of droplet velocities outside the LJ are in reasonably good agreement with the results of the simulation.展开更多
文摘Isothermal solidification process of a dissimilar transient liquid phase （TLP） bonding of FSX-414/MBF80/IN738 system was simulated by finite difference method. The TLP joint model was divided into two parts and a moving liquid /solid interface model was used for the parts. Diffusion equations were solved for each half of the joints simultaneously up to the end of isothermal solidification. The completion time of isothermal solidification, concentration profiles and position of the solid/liquid interface for each half were calculated. The intersection of the solid/liquid interfaces of two halves was considered the end of isothermal solidification. To obtain some required diffusion data, TLP bonding of FSX-414/MBF80/IN738 was performed at different temperature and time under vacuum atmosphere. The calculated results show good agreement with the experimental results.
基金Supported by the National Natural Science Foundation of China (No. 29876022) and Grant of State Key Laboratory of High Speed Hydrodynamics (No. 2007).
文摘Modelling and simulations are conducted on velocity slip and interfacial momentum transfer for supersonic two-pha.se (gas-droplet) flow in the transient section inside and outside a Laval jet(LJ). The initial velocity slip between gas and droplets causes an interfacial momentum transfer flux as high as (2.0-5.0) x 104 Pa. The relaxation time corresponding to this transient process is in the range of 0.015-0.090ms for the two-phase flow formed inside the LJ and less than 0.5ms outside the LJ. It demonstrates the unique performance of this system for application to fast chemical reactions using electrically active media with a lifetime in the order of 1 ms. Through the simulations of the transient processes with initial Mach number Mg from 2.783 to 4.194 at different axial positions inside the LJ, it is found that Mg has the strongest effect on the process. The momentum flux increases as the Mach number decreases. Due to compression by the shock wave at the end of the LJ, the flow pattern becomes two dimensional and viscous outside the LJ. Laser Doppler velocirneter (LDV) measurements of droplet velocities outside the LJ are in reasonably good agreement with the results of the simulation.
