Short carbon fiber felts with an initial porosity of 89.5% were deposited by isobaric, isothermal chemical vapor infiltration using natural gas as carbon source. The bulk density of the deposited carbon/carbon （C/C）...Short carbon fiber felts with an initial porosity of 89.5% were deposited by isobaric, isothermal chemical vapor infiltration using natural gas as carbon source. The bulk density of the deposited carbon/carbon （C/C） composites was 1.89 g/cm3 after depositing for 150 h. The microstructure and mechanical properties of the C/C composites were studied by polarized light microscopy, X-ray diffraction, scanning electron microscopy and three-point bending test. The results reveal that high textured pyrolytic carbon is deposited as the matrix of the composites, whose crystalline thickness and graphitization degree highly increase after heat treatment. A distinct decrease of the flexural strength and modulus accompanied by the increase of the toughness of the C/C composites is found to be correlated with the structural changes in the composites during the heat treatment process.展开更多
Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite ...Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite into graphite nanoplatelets with high efficiency. The obtained graphite nanoplatelets are highly crystalline, and the thickness is less than 10 nm. Moreover, the surface area could reached 738.1 m^2/g with a grinding time of 4 h. Silanized graphite nanoplatelets can disperse well in SG 15W-40 engine oil and serve as lubricant additive. Tribological results indicate that the friction coefficient and wear-scar of the friction pairs are lower than 76% and 41%, respectively, by adding 1.5‰(mass fraction) of silanized graphite nanoplatelets. Notably, the functionalized graphite nanoplatelets can realize large-scale production and commercial application.展开更多
Graphene oxides(GOs) were synthesized via modified Hummers method, and were applied as adsorbents to remove radionuclides from large volumes of aqueous solutions. The single and competitive sorption of four radionucli...Graphene oxides(GOs) were synthesized via modified Hummers method, and were applied as adsorbents to remove radionuclides from large volumes of aqueous solutions. The single and competitive sorption of four radionuclides(i.e., U(VI), 152+154Eu(III), 85+89Sr(II) and 134Cs(I)) on the GOs from aqueous solutions were investigated as a function of p H, ionic strength and radionuclide initial concentrations using batch technique. The results showed that the GOs had much higher sorption capacity than many other contemporary materials, for the preconcentration of radionuclides from large volumes of aqueous solutions. The sorption of radionuclides on GOs obeyed the Langmuir model, and was mainly attributed to surface complexation via the coordination of radionuclides with the oxygen-containing functional groups on GO surfaces. The competitive sorption results indicated that the selectivity sorption capacities were U(VI)>Eu(III)>Sr(II)>Cs(I). The GOs are suitable materials for the efficient removal and preconcentration of radionuclides from aqueous solutions in nuclear waste management and environmental pollution cleanup.展开更多
基金Projects(51221001,50972121)supported by the National Natural Science Foundation of ChinaProject(B08040)supported by the Introducing Talents of Discipline to Universities,ChinaProject(11-BZ-2012)supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China
文摘Short carbon fiber felts with an initial porosity of 89.5% were deposited by isobaric, isothermal chemical vapor infiltration using natural gas as carbon source. The bulk density of the deposited carbon/carbon （C/C） composites was 1.89 g/cm3 after depositing for 150 h. The microstructure and mechanical properties of the C/C composites were studied by polarized light microscopy, X-ray diffraction, scanning electron microscopy and three-point bending test. The results reveal that high textured pyrolytic carbon is deposited as the matrix of the composites, whose crystalline thickness and graphitization degree highly increase after heat treatment. A distinct decrease of the flexural strength and modulus accompanied by the increase of the toughness of the C/C composites is found to be correlated with the structural changes in the composites during the heat treatment process.
基金Project(ZR2011BL005)supported by the Natural Science Foundation of Shandong Province,China
文摘Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite into graphite nanoplatelets with high efficiency. The obtained graphite nanoplatelets are highly crystalline, and the thickness is less than 10 nm. Moreover, the surface area could reached 738.1 m^2/g with a grinding time of 4 h. Silanized graphite nanoplatelets can disperse well in SG 15W-40 engine oil and serve as lubricant additive. Tribological results indicate that the friction coefficient and wear-scar of the friction pairs are lower than 76% and 41%, respectively, by adding 1.5‰(mass fraction) of silanized graphite nanoplatelets. Notably, the functionalized graphite nanoplatelets can realize large-scale production and commercial application.
基金supported by the National Natural Science Foundation of China(21225730,91326202)the Fundamental Research Funds for the Central Universities+2 种基金the Jiangsu Provincial Key Laboratory of Radiation Medicine,Protectionthe Priority Academic Program Development of Jiangsu Higher Education InstitutionsMCTL Visiting Fellowship Program from Key Laboratory of Marine Chemistry Theory and Technology(Ocean University of China),Ministry of Education
文摘Graphene oxides(GOs) were synthesized via modified Hummers method, and were applied as adsorbents to remove radionuclides from large volumes of aqueous solutions. The single and competitive sorption of four radionuclides(i.e., U(VI), 152+154Eu(III), 85+89Sr(II) and 134Cs(I)) on the GOs from aqueous solutions were investigated as a function of p H, ionic strength and radionuclide initial concentrations using batch technique. The results showed that the GOs had much higher sorption capacity than many other contemporary materials, for the preconcentration of radionuclides from large volumes of aqueous solutions. The sorption of radionuclides on GOs obeyed the Langmuir model, and was mainly attributed to surface complexation via the coordination of radionuclides with the oxygen-containing functional groups on GO surfaces. The competitive sorption results indicated that the selectivity sorption capacities were U(VI)>Eu(III)>Sr(II)>Cs(I). The GOs are suitable materials for the efficient removal and preconcentration of radionuclides from aqueous solutions in nuclear waste management and environmental pollution cleanup.
