JP 05320819-A含碳、硅、锰、铬、钼、钨、钒和铁具有极佳抗破裂性能的轧辊材料Roll material for rolling with excellentresistance to craching—contains C,Si,Mn,Cr,Mo,W,V and FeKUBOTA CORPJP
The antiwear and antifriction coating, which contains TiB2 and Nickel-coated graphite, has been obtained on stainless steel 9Cr18 by laser cladding. The processing method, microstructure, interface, microhardness, tri...The antiwear and antifriction coating, which contains TiB2 and Nickel-coated graphite, has been obtained on stainless steel 9Cr18 by laser cladding. The processing method, microstructure, interface, microhardness, tribological properties and the forming mechanisms of the coating are analyzed. Results show that the microstructure of the clad coating are mainly long plume-like primary phase sosoloid Ni-Fe which form the matrix framework, while the in-situ anomalous synthetical TiC grains and uhrafine TiB2 grains uniformly disperse among the framework. The hardness and wear resistance of the coating has been greatly improved, which can be attributed to the reinforcement mechanism of TiC, TiB2, FeC, Fe3C and Cr23 C6. etc. At the same time, the coating has friction-reducing ability.展开更多
The corrosion inhibition of metallic substrates is a prime issue for many potential applications where corrosion plays a crucial role. The development of carbon based on functionalized coatings could increase the life...The corrosion inhibition of metallic substrates is a prime issue for many potential applications where corrosion plays a crucial role. The development of carbon based on functionalized coatings could increase the lifetime of metallic substrates by inhibiting the corrosion process. Present work is an effort to develop a corrosion inhibiting composite coating of graphene oxide and polypyrrole for AISI （American Iron and Steel Institute） type 304 stainless steel substrates. The electrochemical galvanostatic deposition process was applied for coating development. The coating morphology and ability to cover the substrate surface was analyzed with a high-resolution scanning electron microscope. The coating＇s structural and electronic properties were analyzed with Raman spectroscopy. The investigation of corrosion inhibition involved open circuit potential, Tafel, and voltammetry analysis. The standard salt test ASTM （American Society for Testing and Materials） G48A for stainless steel substrate has also been studied. Significant enhancement of corrosion potential as well as pitting potential for the composite coated substrates has been noted. Furthermore, corrosion and breakdown potential increased upon changing the material from graphene oxide to its composite coating. During the salt test analysis, the durability of the composite coating was noted up to 72 h, which is the standard time scale. Based on experimental analysis, this composite material can be used as an effective carbon based on functionalized corrosion inhibitor for stainless steel substrates to increase their lifetime.展开更多
High-quality graphene coating was directly grown on stainless steel meshes via chemical vapor deposition process,during which the morphology of the stainless steel was transformed rugged.When the graphene-coated stain...High-quality graphene coating was directly grown on stainless steel meshes via chemical vapor deposition process,during which the morphology of the stainless steel was transformed rugged.When the graphene-coated stainless steel meshes were applied as current collectors of supercapacitors,the changes of the appearance and the graphene coating improved the contact between stainless steel meshes and the active materials,thus benefiting the performance of the supercapacitors.Furthermore,this simple method can be used to prepare the enhanced current collectors for other energy storage devices.展开更多
文摘JP 05320819-A含碳、硅、锰、铬、钼、钨、钒和铁具有极佳抗破裂性能的轧辊材料Roll material for rolling with excellentresistance to craching—contains C,Si,Mn,Cr,Mo,W,V and FeKUBOTA CORPJP
文摘The antiwear and antifriction coating, which contains TiB2 and Nickel-coated graphite, has been obtained on stainless steel 9Cr18 by laser cladding. The processing method, microstructure, interface, microhardness, tribological properties and the forming mechanisms of the coating are analyzed. Results show that the microstructure of the clad coating are mainly long plume-like primary phase sosoloid Ni-Fe which form the matrix framework, while the in-situ anomalous synthetical TiC grains and uhrafine TiB2 grains uniformly disperse among the framework. The hardness and wear resistance of the coating has been greatly improved, which can be attributed to the reinforcement mechanism of TiC, TiB2, FeC, Fe3C and Cr23 C6. etc. At the same time, the coating has friction-reducing ability.
文摘The corrosion inhibition of metallic substrates is a prime issue for many potential applications where corrosion plays a crucial role. The development of carbon based on functionalized coatings could increase the lifetime of metallic substrates by inhibiting the corrosion process. Present work is an effort to develop a corrosion inhibiting composite coating of graphene oxide and polypyrrole for AISI （American Iron and Steel Institute） type 304 stainless steel substrates. The electrochemical galvanostatic deposition process was applied for coating development. The coating morphology and ability to cover the substrate surface was analyzed with a high-resolution scanning electron microscope. The coating＇s structural and electronic properties were analyzed with Raman spectroscopy. The investigation of corrosion inhibition involved open circuit potential, Tafel, and voltammetry analysis. The standard salt test ASTM （American Society for Testing and Materials） G48A for stainless steel substrate has also been studied. Significant enhancement of corrosion potential as well as pitting potential for the composite coated substrates has been noted. Furthermore, corrosion and breakdown potential increased upon changing the material from graphene oxide to its composite coating. During the salt test analysis, the durability of the composite coating was noted up to 72 h, which is the standard time scale. Based on experimental analysis, this composite material can be used as an effective carbon based on functionalized corrosion inhibitor for stainless steel substrates to increase their lifetime.
基金supported by the National Natural Science Foundation of China(Grant Nos.20973044,21173057,21103030)the Ministry of Science and Technology of China(Grant Nos.2012CB933400,2012CB-933403)
文摘High-quality graphene coating was directly grown on stainless steel meshes via chemical vapor deposition process,during which the morphology of the stainless steel was transformed rugged.When the graphene-coated stainless steel meshes were applied as current collectors of supercapacitors,the changes of the appearance and the graphene coating improved the contact between stainless steel meshes and the active materials,thus benefiting the performance of the supercapacitors.Furthermore,this simple method can be used to prepare the enhanced current collectors for other energy storage devices.
