A detailed mineralogical characterization of a tin-polymetallic ore from Mengzi,Yunnan Province,China,was undertaken by automated electron microprobe-based mineral mapping and quantitative analysis methods.The results...A detailed mineralogical characterization of a tin-polymetallic ore from Mengzi,Yunnan Province,China,was undertaken by automated electron microprobe-based mineral mapping and quantitative analysis methods.The results show that the most valuable metal is Sn（0.98%,mass fraction）.The main tin minerals are cassiterite and stannite,which account for 94.90% of total tin.Other metals,such as Cu（0.261%）,Zn（0.612%） and Pb（0.296%） can also be seen as valuable metal to be recovered.Minerals such as pyrrhotite,pyrite,arsenopyrite,sphalerite,galena and chalcopyrite are disseminated in the ore.Quartz,sericite and dolomite are the main gangue.The optimal grinding fineness should be chosen as 0.037 mm to make sure that most of the tin minerals can be liberated from other minerals.展开更多
A new method for manufacturing explosive charge liner of petroleum perforation bullet, using hot press sintering technique, has been introduced in the paper. The sintering process of making explosive charge liner has...A new method for manufacturing explosive charge liner of petroleum perforation bullet, using hot press sintering technique, has been introduced in the paper. The sintering process of making explosive charge liner has been investigated. The mechanical test and SEM analysis indicate that the property of the liner produced by the process is satisfied.展开更多
Electroless copper plating on diamond particles precoated with 1%Cr was carried out to evaluate the effects of various experimental parameters on coating quality and deposition rate to obtain the optimized reaction pa...Electroless copper plating on diamond particles precoated with 1%Cr was carried out to evaluate the effects of various experimental parameters on coating quality and deposition rate to obtain the optimized reaction parameters. The formulated samples under optimized parameters were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectra and optical microscopy. The best parameters, where uniform and maximum coating thickness was achieved, are etching with 20%NaOH for 30 min, sensitization and activation with SnCl2 and PdCl2 for 5 and 20 min, respectively. The composition of the copper solution bath was 16 g/L CuSO4＆#183;5H2O, 35 mL/L formaldehyde （HCHO）, 23 g/L KNaC4H4O6 at 60 ℃, pH=13 and stirring at （350±15） r/min under ultrasonication.展开更多
基金Project(50774094) supported by the National Natural Science Foundation of ChinaProject(2010CB630905) supported the National Basic Research Program of China
文摘A detailed mineralogical characterization of a tin-polymetallic ore from Mengzi,Yunnan Province,China,was undertaken by automated electron microprobe-based mineral mapping and quantitative analysis methods.The results show that the most valuable metal is Sn（0.98%,mass fraction）.The main tin minerals are cassiterite and stannite,which account for 94.90% of total tin.Other metals,such as Cu（0.261%）,Zn（0.612%） and Pb（0.296%） can also be seen as valuable metal to be recovered.Minerals such as pyrrhotite,pyrite,arsenopyrite,sphalerite,galena and chalcopyrite are disseminated in the ore.Quartz,sericite and dolomite are the main gangue.The optimal grinding fineness should be chosen as 0.037 mm to make sure that most of the tin minerals can be liberated from other minerals.
文摘A new method for manufacturing explosive charge liner of petroleum perforation bullet, using hot press sintering technique, has been introduced in the paper. The sintering process of making explosive charge liner has been investigated. The mechanical test and SEM analysis indicate that the property of the liner produced by the process is satisfied.
基金Project(9140A12060110BQ03)supported by the National Key Laboratory of Science and Technology on Materials under Shock and Impact,China
文摘Electroless copper plating on diamond particles precoated with 1%Cr was carried out to evaluate the effects of various experimental parameters on coating quality and deposition rate to obtain the optimized reaction parameters. The formulated samples under optimized parameters were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectra and optical microscopy. The best parameters, where uniform and maximum coating thickness was achieved, are etching with 20%NaOH for 30 min, sensitization and activation with SnCl2 and PdCl2 for 5 and 20 min, respectively. The composition of the copper solution bath was 16 g/L CuSO4＆#183;5H2O, 35 mL/L formaldehyde （HCHO）, 23 g/L KNaC4H4O6 at 60 ℃, pH=13 and stirring at （350±15） r/min under ultrasonication.
