The RAX series paraxylene （PX） adsorbents RAX-2000A and RAX-3000, are developed by the Sinopec Re- search Institute of Petroleum Processing （RIPP） and manufactured by the Sinopec Catalyst Company. Performance test...The RAX series paraxylene （PX） adsorbents RAX-2000A and RAX-3000, are developed by the Sinopec Re- search Institute of Petroleum Processing （RIPP） and manufactured by the Sinopec Catalyst Company. Performance test of RAX-2000A showed that the average purity of the PX product reached 99.81%, with an average PX yield of 98.6% per pass. The new generation of PX adsorbents, RAX-3000 not only retains most advantages of the adsorbent RAX-2000A, but also has higher selective adsorption capacity by at least 8%. The actual unit production capability of the adsorbent RAX- 3000 was increased by about 18%. The RAX series PX adsorbents exhibited good adaptability to unfavorable feedstock containing high ethyl benzene （EB） fraction besides their better mechanical strength. Preliminary test results indicated that compared to the adsorbent RAX-2000A, the A/Fa and D/F relating to the adsorbent RAX-3000 were notably decreased due to the hi^her selective adsorotion canacitv of the adsorbent RAX-3000.展开更多
E-commerce is known as the most advanced business mode, being the new point for global economic growth in 21 century. Comparing to the traditional purchase mode, E-commerce is available for reducing the purchasing cos...E-commerce is known as the most advanced business mode, being the new point for global economic growth in 21 century. Comparing to the traditional purchase mode, E-commerce is available for reducing the purchasing cost and improving the working efficiency, thus lifting the whole benefit for the company through centralized purchasing.展开更多
The new generation of DCC catalysts, the DMMC/RMMC series catalysts developed by RIPP are introduced in this paper. The large molecule cracking ability is enhanced by increasing the portion of large pores; and the cok...The new generation of DCC catalysts, the DMMC/RMMC series catalysts developed by RIPP are introduced in this paper. The large molecule cracking ability is enhanced by increasing the portion of large pores; and the coke selectivity is improved by adjusting the acidity site density on the matrix surface, while the selective cracking reactions are increased. The sphericity of catalysts is improved by adopting new preparation method. The commercial application results have shown that applying DMMC/RMMC series catalysts with the mixed VGO, VGO plus AR, and hydrotreated VGO feed can increase the propylene yield by 2.43, 1.3 and 0.8 percentage points, respectively, as compared to the previous catalysts along with improvement in some products yields. The refining enterprises can make more profits after applying new series of DCC catalysts.展开更多
This article makes an analysis on the major technical difficulties encountered in the process of revamping and expanding the capacity of the continuous catalytic reforming （CCR） unit from 600 kt/a to 800 kt/a at Tia...This article makes an analysis on the major technical difficulties encountered in the process of revamping and expanding the capacity of the continuous catalytic reforming （CCR） unit from 600 kt/a to 800 kt/a at Tianjin Petrochemical Company. The requirements for expanding the CCR unit capacity to 800 kt/a have been met through adopting the low carbon-make PS-Ⅵ catalyst, properly lowering the RONC of the reformate, and appropriately retrofitting the towers and furnaces while keeping the reaction system, the catalyst regeneration system and the recycle hydrogen compressor intact. The calibration results have revealed that the liquid yield of reformate products, the octane rating of reformate, the pure hydrogen yield, the aromatics yield and the overall conversion rate all have met the revamp design targets.展开更多
文摘The RAX series paraxylene （PX） adsorbents RAX-2000A and RAX-3000, are developed by the Sinopec Re- search Institute of Petroleum Processing （RIPP） and manufactured by the Sinopec Catalyst Company. Performance test of RAX-2000A showed that the average purity of the PX product reached 99.81%, with an average PX yield of 98.6% per pass. The new generation of PX adsorbents, RAX-3000 not only retains most advantages of the adsorbent RAX-2000A, but also has higher selective adsorption capacity by at least 8%. The actual unit production capability of the adsorbent RAX- 3000 was increased by about 18%. The RAX series PX adsorbents exhibited good adaptability to unfavorable feedstock containing high ethyl benzene （EB） fraction besides their better mechanical strength. Preliminary test results indicated that compared to the adsorbent RAX-2000A, the A/Fa and D/F relating to the adsorbent RAX-3000 were notably decreased due to the hi^her selective adsorotion canacitv of the adsorbent RAX-3000.
文摘E-commerce is known as the most advanced business mode, being the new point for global economic growth in 21 century. Comparing to the traditional purchase mode, E-commerce is available for reducing the purchasing cost and improving the working efficiency, thus lifting the whole benefit for the company through centralized purchasing.
文摘The new generation of DCC catalysts, the DMMC/RMMC series catalysts developed by RIPP are introduced in this paper. The large molecule cracking ability is enhanced by increasing the portion of large pores; and the coke selectivity is improved by adjusting the acidity site density on the matrix surface, while the selective cracking reactions are increased. The sphericity of catalysts is improved by adopting new preparation method. The commercial application results have shown that applying DMMC/RMMC series catalysts with the mixed VGO, VGO plus AR, and hydrotreated VGO feed can increase the propylene yield by 2.43, 1.3 and 0.8 percentage points, respectively, as compared to the previous catalysts along with improvement in some products yields. The refining enterprises can make more profits after applying new series of DCC catalysts.
文摘This article makes an analysis on the major technical difficulties encountered in the process of revamping and expanding the capacity of the continuous catalytic reforming （CCR） unit from 600 kt/a to 800 kt/a at Tianjin Petrochemical Company. The requirements for expanding the CCR unit capacity to 800 kt/a have been met through adopting the low carbon-make PS-Ⅵ catalyst, properly lowering the RONC of the reformate, and appropriately retrofitting the towers and furnaces while keeping the reaction system, the catalyst regeneration system and the recycle hydrogen compressor intact. The calibration results have revealed that the liquid yield of reformate products, the octane rating of reformate, the pure hydrogen yield, the aromatics yield and the overall conversion rate all have met the revamp design targets.
