印刷品与油墨 抗蜡与石蜡性能的测定方法

《印刷品与油墨 抗蜡与石蜡性能的测定方法》和《印刷品与油墨 耐香料性的测定方法》两项行业标准已由上海出版印刷高等专科学校完成“征求意见稿”.现刊登出来广泛征求意见.

提高陈旧性石蜡标本抗原检出率的抗原修复方法

目的:提高陈旧性石蜡标本抗原的检出效果。方法:取时间>5年的肺癌石蜡包埋组织,对同一蜡块连续切片,使用4种不同的缓冲液进行高压修复,分别为:枸橼酸缓冲液(CA,pH6.0)、PBS(pH7.0)、EDTA(pH8.0)和EDTA(pH9.0),每一种抗原修复液又分别采用2、5、10、15、20、25、30min7个不同的时间修复,比较不同条件下陈旧性肺癌石蜡组织中Ki-67的表达结果。结果:采用EDTA(pH9.0)、高压修复维持喷气时间15min时,Ki-67阳性检出效果明显提高,阳性率可达75%以上;维持喷气时间分别为20、25、30min时,阳性检出效果更好,阳性率达到90%以上。结论:用EDTA(pH9.0)高压修复肺癌石蜡切片20min或20min以上可显著提高存放时间>5年的陈旧性肺癌石蜡切片Ki-67抗原的检出率。

胰蛋白酶-尿素联合消化增强石蜡切片免疫组化敏感性

胰蛋白酶和尿素均能明显地增强石蜡切片免疫组化的敏感性染色、降低背景[1],但胰蛋白酶消化力强,易脱片和破坏组织结构,而尿素消化力较弱,对多克隆抗体染色较差.针对上述缺点、我们曾对胰蛋白酶尿素联合处理的石蜡切片进行免疫荧光染色进行初步观察[2],近来我们对常用抗体结合的抗原用胰蛋白酶-尿素联合消化,进行免疫酶组织化学染色,获得了比单纯胰蛋白酶或尿素消化更好的特异性染色结果,现报告如下.

青鳉(Oryzias latipes)性腺分化与发育的组织学观察

青锵（Oryzias latipes）繁殖力强、繁殖周期短，为硬骨鱼类研究领域的模式生物。口前，尚无青鲻性腺分化与发育过程的系统资料。该文以青鲻孵化后不同时期的生殖腺为材料，经石蜡切片和HE染色后，于光学显微镜下观察其性腺的出现、分化及成熟过程。结果显示：孵化后5～10d，仔鱼腹腔右侧已可见生殖腺，生殖细胞体积明显大于周围的体细胞；孵化后10d，性腺开始分化，雌、雄性个体性腺出现结构上的差异，雌性个体内可明湿观察到生殖包囊结构；随后，雌、雄性个体内先后可见卵子和精子的发生过程和组织学分期；孵化后50d，首见卵巢腔结构和成熟精子。此外，还观察到性反转现象的特例，即两性特征共存的现象。该结果将为发育生物学、遗传生物学提供基础资料。

Preparation of High Viscosity PAO from Mixed Alpha-Olefins over Metallocene Catalyst

Polymerization of mixed alpha-olefins originating from the Fischer-Tropsch synthesis catalyzed by theBu)_3/[Me_2NHPh]^+[B(C_6F_5)_4]^-,was studied.The effects of the Zr/olefin mole ratio,Al/Zr mole ratio,reaction temperature,and reaction time on the viscosity and molecular weight of the product were investigated.The conversion under optimized conditions reached 97.3%.The product structure was characterized by ^(13)C NMR spectrometry and ~1H NMR spectrometry,and the conversion of olefins with different carbon numbers under different conditions was determined by GC analysis.The polymer obtained under optimized conditions has a high viscosity index of 262 with a narrow molecular weight distribution of 1.95,which is a desired component for lubricating base oil.

Development of Palm Oil Based Bio-product Industrial Wax and Its Application Performance Study

Machining is a mechanical process where excess material from a work is removed to produce a product. At the moment different ferrous, non-ferrous materials and industrial blue wax have been used for prototype models. However such materials is very expensive. Hence an attempt is made to substitute these materials by the palm oil based bio-wax produced in Malaysia. In this research, the authors will analyze and investigate whether there is a possibility to use the palm oil based bio-wax material to substitute with the petroleum based industrial-wax. Experimental analyses are carried out to investigate the capability and the strength of the palm oil based bio-wax material. The matrix blends were prepared of fatty acids from oleo-chemicals, palm oil wax, natural ash fibre and low linear density polyethylene （LLDPE） by stirring and melt-mixing. Sample b!ends are machined with lathe machining process. The sample blends showed there was no built edge formation and good smooth surface production.

High level of ezrin expression in colorectal cancer tissues is closely related to tumor malignancy

AIM:To investigate the ezrin expression in normal colorectal mucosa and colorectal cancer tissues, and study the correlation between ezrin expression in colorectal cancer tissues and tumor invasion and metastasis.METHODS: Eighty paraffin-embedded cancer tissue samples were selected from primary colorectal adenocarcinoma. Twenty-eight patients had well-differentiated, 22 had moderately differentiated and 30 had poorly differentiated adenocarcinoma. Forty-five patients and 35 patients had lymph node metastasis. Forty-five patients were of Dukes A to B stage, and 35 were of C to D stage. Another 22 paraffi n-embedded tissue blocks of normal colorectal epithelium (>5 cm away from the edge of the tumor) were selected as the control group. All patients with colorectal cancer were treated surgically and diagnosed histologically, without preoperative chemotherapy or radiotherapy. The immunohistochemistry was used to detect the ezrin expression in paraffin-embedded normal colorectal mucosa tissues and colorectal cancer tissue samples.RESULTS: Ezrin expression in colorectal cancer was significantly higher than in normal colorectal mucosa (75.00% vs 9.09%, P<0.01), and there was a close relationship between ezrin expression and the degree of tumor differentiation, lymph node metastasis and Dukes stage (88.46% vs 50.00%, P<0.01; 94.28% vs 51.11%, P<0.01; 94.28% vs 51.11%, P<0.01).CONCLUSION: Ezrin expression is obviously higher in colorectal cancer tissues than in normal colorectal mucosa tissues, and the high level of ezrin expression is closely related to the colorectal cancer invasion and metastasis process.

Effect of preparation methods on the structure and catalytic performance of Fe–Zn/K catalysts for CO2 hydrogenation to light olefins

Potassium promoted iron–zinc catalysts prepared by co-precipitation method(C–Fe–Zn/K),solvothermal method(S–Fe–Zn/K)and hydrothermal method(H–Fe–Zn/K)could selectively convert CO_2to light olefins,respectively.The physicochemical properties of the obtained catalysts were determined by SEM,N_2physisorption,XRD,H_2-TPR,CO_2-TPD and XPS measurements.The results demonstrated that preparation methods had great influences on the morphology,phase structures,reduction and adsorption behavior,and hence the catalytic performance of the catalysts.The samples prepared by hydrothermal and co-precipitation method generated small uniform particles and led to lower specific surface area.In contrast,microspheres with larger specific surface area were formed by self-assembly of nanosheets using solvothermal method.ZnFe_2O_4was the only detectable phase in the fresh C–2Fe–1Zn/K,S–3Fe–1Zn/K and S–2Fe–1Zn/K samples.ZnFe_2O_4and ZnO co-existed with increasing Zncontent in S–1Fe–1Zn/K sample,while ZnO and Fe_2O_3could be observed over H–2Fe–1Zn/K sample.All the used samples contained Fe_3O_4,ZnO and Fe_5C_2.The peak intensity of ZnO was strong in the AR-H–2Fe–1Zn/K sample while it was the lowest in the AR-C–2Fe–1Zn/K sample after reaction.The formation of ZnFe_2O_4increased the interaction between iron and zinc for C–2Fe–1Zn/K and S–Fe–Zn/K samples,causing easier reduction of Fe_2O_3to Fe_3O_4.The surface basicity of the sample prepared by co-precipitation method was much more than that of the other two methods.During CO_2hydrogenation,all the catalysts showed good activity and olefin selectivity.The CO selectivity was increased with increasing Zncontent over S–Fe–Zn/K samples.H–2Fe–1Zn/K catalyst preferred to the production of C_5^+hydrocarbons.CO_2conversion of 54.76%and C_2~=–C_4~=contents of 57.38%were obtained on C–2Fe–1Zn/K sample,respectively.

Oncogenic Role of Skp2 and p27^(Kip1) in Intraductal Proliferative Lesions of the Breast

Objective To investigate whether the connection of p27 Kip1 to S-phase kinase-associated protein 2 (Skp2) plays an oncogenic role in intraductal proliferative lesions of the breast. Methods Here we investigated the mechanism involved in association of Skp2's degradation of p27 Kip1 with the breast carcinogenesis by immunohistochemical method through detection of Skp2 and p27 Kip1 protein levels in 120 paraffin-embedded tissues of intraductal proliferative lesions including usual ductal hyperplasia (UDH, n=30), atypical ductal hyperplasia (n=30), flat epithelial atypia (FEA, n=30), and ductal carcinoma in situ (DCIS, n=30). Moreover, the expression status of Skp2 and p27 Kip1 in 30 cases of the normal breast paraffin-embedded tissues were explored. Results The DCIS group was with the highest Skp2 level and the lowest p27 Kip1 level, and the UDH group was with the lowest Skp2 level and the highest p27 Kip1 level. Both Skp2 and p27 Kip1 levels in the DCIS group were significantly different from those in the UDH group (all P<0.01). The levels of Skp2 and p27 Kip1 in the FEA group were significantly different from both the DCIS and UDH groups (all P<0.05). p27 Kip1 was negatively correlated with Skp2 in both the UDH group (r=-0.629, P=0.026) and DCIS group (r=-0.893, P=0.000). Conclusion Overexpression of Skp2 might be the mechanism underlying p27 Kip1 over degradation.

Improving Stability of Gasoline by Using Ionic Liquid Catalyst

The composition, characteristics and preparation of ionic liquids are presented. The factors influencing the stability of gasoline and the significance of improving gasoline stability are discussed. A novel way to improve the stability of gasoline by using ionic liquid catalyst is developed. The contents of olefin, basic nitrogen and sulfur in gasoline are determined and the optimal experimental conditions for improving gasoline stability are established.The ionic liquid catalyst, which is environmentally friendly, can reduce the olefin content in gasoline, and such process is noted for mild reaction conditions, simple operation, short reaction time, easy recycling of the ionic liquid catalyst and ready separation of products and catalyst.

Study on Disproportionation Reaction of FCC Gasoline on Acid Catalyst

Based on the experimental data relating to the reaction of FCC gasoline on acid catalyst the analysis of product distribution, and composition of gasoline and diesel fractions have been analyzed. The occurrence of disproportionation reaction of FCC gasoline on acid catalyst and the network of disproportionation reaction have been identified. Study has also shown that different reaction temperatures can result in different pathways of disproportionation reactions on acid catalyst.

Use of Residual Material in Biobanking： Solidarity, Common Good, and Informed Consent

Biological residual materials can be obtained from surgical activities or from pathological waste material collected for analysis and stored in formalin. This material can be stored in biobanks with the purpose of future research. Formalin-fixed tissue and also formalin-fixed paraffin embedded tissues are not suitable for all kinds of genetic studies on DNA or RNA, as formalin solution is well known for damaging nucleic acids. Therefore, for the purpose of conducting genetic studies, samples should be frozen in order to maintain a good quality of DNA/RNA over time Biobanks, in which waste samples are frozen, are undoubtedly expensive to maintain; however, it could be useful and important to consider their possible implication in particular research, regarding for example the tumor cells growth process, or when the procurement of samples is difficult. Regarding the relationship between informed consent and tissue collection, storage and research, two choices are possible： irreversible or reversible sample anonymization. These procedures involve different approaches and possible solutions that we will seek to define. Also, an important ethical aspect in regard to the role of biobanks is encouraging sample donation. For donors, seeing human sample being kept rather than discarded and seeing them become useful for research highlight the importance of the human body and improve the attitude towards donation. This process might also facilitate the giving of informed consent more trustfully and willingly.

Innovative Production of PCMs （Phase Change Materials） Preparation by Vacuum Impregnation： Thermal and Physical Properties

Energy is essential for every human activity for more comfortable life but also consumes more natural resources. In order to control human comfort, temperature usually required when the differences in temperature swing between indoor and outdoor temperatures. PCMs （phase change materials） are the high latent heat materials which can be used in building materials for energy conservation purpose. PCMs can store thermal energy and also can prevent heat to pass through temperature control areas. Paraffin has been used as PCMs are absorbed into the pore of fly ash as paraffin/fly-ash composite and mixed into the buildings materials. Paraffin is an organic material with high melting point （-59℃）, and nonflammable materials therefore paraffin can be used as the building materials for the function of PCMs for energy saving purposes. Composite PCMs can be prepared by vacuum impregnation process. Paraffin in liquid form will be impregnated into the pore of fly ash by vacuum capillary force to form paraffin/fly ash composite PCMs. Vacuum impregnation pressures, vacuum times, impregnation times of liquid paraffin in fly ash pores and temperatures for melting the solid paraffin into the liquid form are all affect on the thermal properties of paraffin/fly ash composite PCMs. Paraffin or PCMs impregnation are also relate to the physical property including the fractal dimensions of the pores of the fly ash particles and paraffin/fly ash composite PCMs. The fractal dimensions of the pore of fly ash and paraffin/fiy ash composites PCMs are between the values of 1.0 and 2.0. Fractal dimensions of paraffin/fly-ash composite PCMs have the same trend as the thermal properties for heat capacity and latent heat of melting. These fractal dimensions technique is a novel method to measure physical property of building material related to latent heat and heat capacity.

Expression of coxsackie and adenovirus receptor in small cell lung cancer

Objective: We explored the expression of coxsackie and adenovirus receptor (CAR) in small cell lung cancer (SCLC) tissue. Methods: CAR expression in 31 SCLC was assessed in formaldehyde-fixed, paraffin-embedded tissue according to the EnVision immunohistochemistry procedure, while 3 samples of surgical specimens of non-malignant lung disease were taken as the negative control. Results: We observed that the expression of CAR was detectable positive in all the 31 cases from the small cell lung cancer tissue, in contrasting that non-malignant lung tissue control. Conclusion: The high expression of CAR appeared in SCLC tissue indicates that it play an important role in of adenovirus vector-based gene therapy in SCLC.

Modification of Paraffin Wax for Manufacturing Difficult-to-Form Green Compacts and Its Application in WC-Co Cemented Carbides

The production of deep well-shaped WC-Co cemented carbide blocks via industrial powder pressing remains a challenging technical problem,primarily due to the unsuitability of the forming agent.The forming agent paraffin wax was modified through four types of modifiers,including organic high-molecular-mass resins,plasticizers,surfactants and lubricants.The qualitative screening of resin types was explored and an orthogonal experiment involving the combination of these four paraffin wax modifiers was conducted to obtain an optimized quantitative ratio of modifiers.The results reveal that the insertion of the small molecule chain of resin into the interstitial spaces of paraffin wax crystals is likely a crucial factor for improving the compatibility between the resin and paraffin wax.Through orthogonal experiments,the optimized formulation for the forming agent is determined:100 parts of 58#paraffin wax,15 parts of EVA-2,4 parts of DPHP,4 parts of oleic acid amide and 2 parts of stearic acid.This optimized formulation is applied to industrial production at one Chinese company,and qualified deep well-shaped cemented carbide products are achieved,which contain 90wt%WC and 10wt%Co.

Damages on the lubricated surfaces in bearings under the influence of weak electrical currents

A special bearing tester was constructed to investigate the damage behavior on the lubricated surfaces in bearings with the passage of weak electrical currents as low as^1 mA.The results showed that when polar glycerine was used as the lubricant,many narrow and deep pits formed on the lubricated surfaces.In contrast,when the experimental conditions under the lubrication of the nonpolar paraffin oil were close to those under the lubrication of polar glycerine oil,damages on the lubricated surfaces were unobvious.Emergence of microbubbles in polar lubricants with the passage of electrical currents was proposed to be responsible for the observed damages on the lubricated surfaces.