乌杨汉阙加固与修复工程

以重庆.中国三峡博物馆乌杨汉阙加固工程为背景,在现场试验的基础上探讨了采用现代植筋加固技术、碳纤维板材补强技术、裂缝闭合修复技术以及石材表面防风化处理等综合处理技术对石质汉阙进行加固与修复的途径,取得了较为理想的效果,保证了乌杨汉阙“无恙”的复原,重现了汉代石阙的历史神韵,具有重要的文化价值和历史意义.开创了我国石质结构加固的新思路,为我国石质结构的保护加固积累了极其宝贵的经验.

西岳庙“少昊之都”石牌楼加固与修复工程

西岳庙内现存的3座石牌楼中,“少昊之都”由于意外自然灾害而出现了严重的倾斜及残损,为了重现“少昊之都”石牌楼的历史神韵,在有关方面组织下,采用现代施工技术对“少昊之都”进行了加固与修复,取得了较为理想的效果,为我国石质文物的加固保护积累了极其宝贵的经验。

High Performance Ultraviolet Photodetector Fabricated with ZnO Nanoparticles-graphene Hybrid Structures

Ultraviolet （UV） photodetector constructed by ZnO material has attracted intense research and commercial interest. However, its photoresistivity and photoresonse are still unsatisfied. Herein, we report a novel method to assemble ZnO nanoparticles （NPs） onto the reduced graphite oxide （RGO） sheet by simple hydrothermal process without any surfactant. It is found that the high-quality crystallized ZnO NPs with the average diameter of 5 nm are well dispersed on the RGO surface, and the density of ZnO NPs can be readily controlled by the concentration of the precursor. The photodetector fabricated with this ZnO NPs- RGO hybrid structure demonstrates an excellent photoresponse for the UV irradiation. The results make this hybrid especially suitable as a novel material for the design and fabrication of high performance UV photodector.

Petroleum geological framework and hydrocarbon potential in the Yellow Sea

Sedimentary basins in the Yellow Sea can be grouped tectonically into the North Yellow Sea Basin (NYSB), the northern basin of the South Yellow Sea (SYSNB) and the southern basin of the South Yellow Sea (SYSSB). The NYSB is connected to Anju Basin to the east. The SYSSB extends to Subei Basin to the west. The acoustic basement of basins in the North Yellow Sea and South Yellow Sea is disparate, having different stratigraphic evolution and oil accumulation features, even though they have been under the same stress regime since the Late Triassic. The acoustic basement of the NYSB features China-Korea Platform crystalline rocks, whereas those in the SYSNB and SYSSB are of the Paleozoic Yangtze Platform sedimentary layers or metamorphic rocks. Since the Late Mesozoic terrestrial strata in the eastern of the NYSB (West Korea Bay Basin) were discovered having industrial hydrocarbon accumulation, the oil potential in the Mesozoic strata in the west depression of the basin could be promising, although the petroleum exploration in the South Yellow Sea has made no break-through yet. New deep reflection data and several drilling wells have indicated the source rock of the Mesozoic in the basins of South Yellow Sea, and the Paleozoic platform marine facies in the SYSSB and Central Rise could be the other hosts of oil or natural gas. The Mesozoic hydrocarbon could be found in the Mesozoic of the foredeep basin in the SYSNB that bears potential hydrocarbon in thick Cretaceous strata, and so does the SYSSB where the same petroleum system exists to that of oil-bearing Subei Basin.

Structural Characteristics of Paleozoic and Geological Significance of Oil and Gas of Dongpu Depression

The Dongpu depression has experienced a complicated evolution of structure since Mesozoic. The Paleozoic carbonate rock has been strongly reformed and the buried hills with different characteristics of structure are developed in the depression. There exist lots of groups of fault structures with strikes of NNE(or NE),NW, near NS and EW etc., of which the faults with strikes of NNE and NW play an important controlling role on present-day structural framework of the depression. The faults with near NS-striking and EW-striking deeply affect the establishment of structural framework of basement of the depression. Although most of the fractures are filled by calcite and other minerals, under the action of later structural stress, the earlier fractures could change their features into tensional ones. Therefore, much attention should be paid to the exploration and exploitation of Paleozoic oil and gas in Dongpu depression.

Petrological study of the western Iratsu mass from the Sambagawa metamorphic belt, central Shikoku, Japan

The western Iratsu mass, the largest tectonic body in the Sambagawa metamorphic belt, central Shikoku, is mainly composed of epidote amphibolite with minor amounts of eclogite. Systematically, a majority of garnets show bell-shaped chemical zoning of pyrope contents and Mg/(Mg+Fe2+) monotonously increasing outward. The grossular component in zonal garnet increases outwards, maximizes at an intermediate part, and then decreases towards the outermost rim, reflecting a process from increasing to decreasing pressure conditions during the prograde metamorphism. Jadeite contents of omphacite range from 25～20mole% within the cores to 15～10 mole% at the rims, implying a pressure-decreasing process (from 11 × 105 Pa to 8 × 105 Pa). The peak pressure-temperature (P-T) condition of 630～680 ℃ and ca. 15× 105 Pa in the western Iratsu mass is much higher than that of (610±25) ℃ and (10± 1)× 105 Pa of the Sambagawa oligoclase-biotite zone schists. The authors suggest a clockwise P-T-t path for the western Iratsu mass.

Modifying the acidity of H-MOR and its catalytic carbonylation of dimethyl ether

Among the reactions catalyzed by zeolites there are some that exhibit high selectivity due to the spatial confinement effect of the zeolite framework.Tailoring the acidity,particularly the distribution and location of the Bronsted acid sites in the zeolite is effective for making it a better catalyst for these reactions.We prepared a series of H-mordenite（H-MOR） samples by varying the composition of the sol-gel,using different structure directing agents and post-treatment.NH3-TPD and IR characterization of adsorbed pyridine were employed to determine the amount of Bronsted acid sites in the 8-membered ring and 12-membered ring channels.It was shown that controlled synthesis was a promising approach to improve the concentration of Bronsted acid sites in MOR,even with a low Al content.Using an appropriate composition of Si and Al in the sol-gel favored a higher proportion of Bronsted acid sites in the 8-membered ring channels.HMI as a structure-direct agent gave an obvious enrichment of Bronsted acid sites in the 8-membered ring.Carbonylation of dimethyl ether was used as a probe reaction to examine the modification of the acid properties,especially the Bronsted acid sites in the 8-membered ring channels.There was a linear relationship between methyl acetate formation and the number of Bronsted acid sites in the 8-membered ring channels,demonstrating the successful modification of acid properties.Our results provide information for the rational design and modification of zeolites with spatial constraints.

Research on characters of surrounding rock in complex geology conditions and supporting time

The methods combined by test, field monitoring and theoretical analysis were adopted to do the systemic research on the rock mass from micro-structure to macro-deformation, and rheological model of Jinchuan rock mass was established to discuss the reasonable supporting time. Resuhs show that supporting after suitable stress and displacement release can benefit for the long-term stability of surrounding rock.

Research on New Silica Sol Matrix Used in Fluid Catalytic Cracking Reaction

A new silica sol binder was obtained by mixing the acid-modified aluminium sulfate and water glass. The effect of SiO2 concentration in sodium silicate, pH value and polymerization was investigated. The new silica sol binder, which possessed abundant pore volume and suitable acid amount, was an ideal component for preparing cracking catalyst. As a result, the corresponding catalyst comprising the new binder showed excellent performance. Compared with the reference sample, the liquefied petroleum gas(LPG) and propylene yield obtained over this catalyst increased by 3.49 and 1.20 percentage points, respectively. The perfect pore structure and suitable Lewis acid amount of new silica sol were the possible reason leading to its outstanding performance.

2D metal‐free heterostructure of covalent triazine framework/g‐C_(3)N_(4) for enhanced photocatalytic CO_(2) reduction with high selectivity

Solar‐driven CO_(2)conversion to precious fossil fuels has been proved to become a potential way to decrease CO_(2)with producing renewable fuels,which mainly relies on photocatalysts with efficient charge separation.In this work,a metal free heterostructure of covalent triazine framework(CTF)and graphite carbon nitride(g‐C_(3)N_(4),abbreviated as CN)is applied in the CO_(2)photoreduction for the first time.Detailed characterization methods such as photoluminescence(PL)and time‐resolved PL(TR‐PL)decay are utilized to reveal the photo‐induced carries separating process on g‐C_(3)N_(4)/CTF(CN/CTF)heterostructure.The introduced CTF demonstrated a great boosting photocatalytic activity for CN,bringing about the transform rates of CO_(2)to CO reaching 151.1μmol/(g·h)with a 30 h stabilization time,while negligible CH_(4)was detected.The optimal CN/CTF heterostructure could more efficiently separate charges with a lower probability of recombination under visible light irradiation,which made the photoreduction efficiency of CO_(2)to CO be 25.5 and 2.5 times higher than that of CTF and CN,respectively.This investigation is expected to offer a new thought for fabricating high‐efficiency photocatalyst without metal in solar‐energy‐driven CO_(2)reduction.

Optical and Structural Properties of Carbon Nanotube-Rutile Heterostructures

The paper presents a study of the growth and characterization of carbon nanotube-rutile nanocomposites. The heterostructures were obtained with a chemical mixing method. Scanning electron microscope images show that the samples appear as a homogeneous powder of rutile with carbon nanotubes intercalated in interspaces between the TiO2 grains. Characterization by both X-ray photoelectron spectroscopy and cathodo-luminescence analysis show the formation of CO-Ti chemical bonds with a decrease of 0.8 eV in the band gap compared to pure rutile. The consequence of this band gap modification is a strong change in optical properties. Luminescence emission is drastically reduced and absorption in the visible range is increased of about 6% at very low concentration （1%） of carbon nanotubes.

Sensitivity analysis of influencing parameters in cavern stability

In order to analyze the stability of the underground rock structures,knowing the sensitivity of geomechanical parameters is important.To investigate the priority of these geomechanical properties in the stability of cavern,a sensitivity analysis has been performed on a single cavern in various rock mass qualities according to RMR using Phase 2.The stability of cavern has been studied by investigating the side wall deformation.Results showed that most sensitive properties are coefficient of lateral stress and modulus of deformation.Also parameters of Hoek-Brown criterion and r c have no sensitivity when cavern is in a perfect elastic state.But in an elasto-plastic state,parameters of Hoek-Brown criterion and r c affect the deformability;such effect becomes more remarkable with increasing plastic area.Other parameters have different sensitivities concerning rock mass quality(RMR).Results have been used to propose the best set of parameters for study on prediction of sidewall displacement.

Acoustic-electrical properties and rock physics models for shale-oil formations:prediction of reservoir properties of interbedded sandstone and shale layers

In recent years,the Yanchang shale-oil formations of the Ordos Basin are rich in reserves with complex lithology and structure characteristics,low porosity and low permeability,and weak anomalies for oil and water discriminations,have been the key targets of unconventional oil/gas resource exploration and development in the relevant areas.The joint acoustic-electrical(AE)properties can be used to interpret reservoir lithology,mineralogy,pore structure,and fluid saturation.To conduct tests of thin section analysis,X-ray diff raction,and ultrasonic and electrical experiments at diff erent pressures and saturation degrees,cores from the shale-oil formations in the Q area of the basin are collected.The variations in AE properties with respect to clay content,porosity,pressure(microfracture),and saturation are analyzed.The experimental results indicate that the rock physics behaviors of sandstones with diff erent clay contents vary significantly.The AE properties of clean sandstones are basically dependent on the microfractures(pressure),while for muddy sandstones,the clay content is an important factor affecting the responses.The target reservoir consists of interbedded sandstone and shale layers.The AE equivalent medium equations and the Gurevich theory are applied to establish the joint models for the diff erent lithologies and simulate the variations in AE properties with respect to fluid type,pore structure,and mineral components.The three-dimensional joint templates of clean and muddy sandstones,as well as shale,are developed based on the elastic and electrical attributes and then calibrated using the experimental and well-log data.The reservoir properties are estimated with the templates and validated by the log data.The results indicate that the joint templates based on lithology characteristics can eff ectively characterize the properties of interbedded sandstone and shale layers.Furthermore,the combined application of AE data provides more beneficial information for the assessment of rock properties,leading to precise estimates that conform with the actual formation conditions.

Structure and stability of Li-Mn-Ni composite oxides as lithium ion sieve precursors in acidic medium

A series of spinel Li-Mn-Ni composite oxides with theoretical chemical formula of LiNixMn2-xO4 （0〈_x〈_1.0） were synthesized by liquid phase method. Their structure and morphology were characterized by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）, respectively. The stability of these Ni-substituted spinel oxides prepared at different temperatures was investigated in acidic medium as well. The results show that Ni can be brought into the spinel framework completely to form well-crystallized product when x〈_0.5 and the optimized synthesis temperature is 800℃. LiNi0.4Mn1.6O4 prepared at 800℃ can maintain the spinel structure and morphology with Li extraction ratio of 30.37%, Mn extraction ratio of 8.78% and Ni extraction ratio of 1,82% during acid treatment. The incorporated Ni not only inhibits the dissolution of Mn, but also reduces the extraction of Li due to the lattice contraction

Exploring variations in upper ocean structure for the last 2 Ma of the Nansha area by means of calcareous nannofossils

A great number of calcareous nannofossils have been found in the deep-sea sediments of 2.32 Ma at ODP Site 1143 located in the Nansha area, the southern South China Sea. The number of coccoliths varies from about 0.5×106 up to almost 53×106 coccoliths/g sediment, with an average of 16×106 coccoliths/g sediment. The accumulation rate of total coccoliths varies from 1×106 to 278×106 coccoliths/cm2 ka. The nannofossil assemblages are usually dominated by a lower-photic species-Florisphaera profunda, of which the average percentage is about 70% in all samples. The absolute abundance and the accumulation rate of nannofossils as well as the percentage ofF. profunda display significant oscillations on two different time scales. One is the fluctuation coincident with the glacial-interglacial cycle, and the other is the long-term changes on a time scale longer than 100 ka. Six evolutionary stages of calcareous nannofossils could be divided for the last 2.32 Ma, from which we can reconstruct the changes in the depth of nutricline of the Nansha area. In this paper, the possible mechanism resulting in these variations is also discussed.

Graphene nanopores toward DNA sequencing： a review of experimental aspects

Nanopores for DNA sequencing have drawn much attention due to their potentials to achieve amplification-free, low-cost, and high-throughput analysis of nuclei acids. The material configuration and fabrication of the nanopore has become one important consideration in the nanopore based DNA sequencing research. Among various materials, the newly emerged graphene has brought more opportunities to the development of sequencing technology because of its unique structures and properties. This review mainly focuses on the experimental aspects of graphene nanopore research including the nanopore fabrication methods and processes. Meanwhile, the challenges in the present graphene nanopore research including hydrophobicity, translocation velocity and noise are also addressed and discussed.

Thermoelectric transport across graphene/hexagonal boron nitride/graphene heterostructures

We report thermoelectric transport measurements across a graphene/hexagonal boron nitride （h-BN）/graphene heterostructure device. Using an AC lock-in technique, we are able to separate the thermoelectric contribution to the I-V characteristics of these important device structures. The temperature gradient is measured optically using Raman spectroscopy, which enables us to explore thermoelectric transport produced at material interfaces, across length scales of just 1-2 nm. Based on the observed thermoelectric voltage （AV） and tem- perature gradient （AT）, a Seebeck coefficient of -99.3 μV/K is ascertained for the heterostructure device. The obtained Seebeck coefficient can be useful for understanding the thermoelectric component in the cross-plane I-V behaviors of emerging 2D heterostructure devices. These results provide an approach to probing thermoelectric energy conversion in two-dimensional layered heterostructures.

Two-dimensional SnO_2/graphene heterostructures for highly reversible electrochemical lithium storage

The ever-growing market demands for lithium ion batteries have stimulated numerous research efforts aiming at the exploration of novel electrode materials with higher capacity and long-term cycling stability.Two-dimensional (2D)nanomaterials and their heterostructures are an intense area of study and promise great potential in electrochemical lithium storage owing to their unique properties that result from structural planar confinement.Here we report a microwave chemistry strategy to integrate ultrathin SnO2 nanosheets into graphene layer to construct surface-to-surface 2D heterostructured architectures,which can provide unique structural planar confinement for highly reversible electrochemical lithium storage.The as-synthesized 2D SnO2/graphene heterostructures can exhibit high reversible capacity of 688.5mAh g^-1 over 500cycles with excellent long-term cycling stability and good rate capability when used as anode materials for lithium ion batteries.The present work definitely reveals the advantages of 2D heterostructures featured with a surface-to-surface stack between two different nanosheets in energy storage and conversion devices.

Contracted interlayer distance in graphene/sapphire heterostructure

Direct growth of graphene on insulators is expected to yield significant improvements in performance of graphene-based electronic and spintronic devices. In this study, we successfully reveal the atomic arrangement and electronic properties of a coherent heterostructure of single-layer graphene and α-Al2O3（0001）. The analysis of the atomic arrangement of single-layer graphene on α-Al2O3（0001） revealed an apparentcontradiction. The in-plane analysis shows that single-layer graphene grows not in a single-crystalline epitaxial manner, but rather in polycrystalline form, with two strongly pronounced preferred orientations. This suggests relatively weak interfacial interactions are operative. However, we demonstrate that unusually strong physical interactions between graphene and α-Al2O3（0001） exist, as evidenced by the small separation between the graphene and the α-Al2O3（0001） surface. The interfacial interaction is shown to be dominated by the electrostatic forces involved in the graphene n-system and the unsaturated electrons of the topmost O layer of α-Al2O3（0001）, rather than the van der Waals interactions. Such features causes graphene hole doping and enable the graphene to slide on the α-Al2O3（0001） surface with only a small energy barrier despite the strong interfacial interactions.

Investigation of structural and magnetic properties of Ni implanted rutile

In this paper,the structural and magnetic properties of Ni metal implanted TiO 2 single crystals are discussed.Ni nanocrystals (NCs) have been formed in TiO 2 after ion implantation.Their crystalline sizes were increased with increasing post-annealing temperature.Metallic Ni NCs inside the TiO 2 matrix are stable up to an annealing temperature of 1073 K.The Ni NCs forming inside TiO 2 are the major contribution of the measured ferromagnetism.