This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully ...This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.展开更多
Hundreds of mine flooding accidents have occurred in China since the 1950s. These flooding accidents result in submerged working faces, even entire coal mines, leading to tremendous economic losses. It is reported tha...Hundreds of mine flooding accidents have occurred in China since the 1950s. These flooding accidents result in submerged working faces, even entire coal mines, leading to tremendous economic losses. It is reported that among 601 state-owned mines in China, 285 mines are exposed to water-inrush risks. The water pressure is becoming larger and larger with the increase of mining depth, leading to an increase of water-inrush hazards. Only when the risk of mine flooding is predicted in a reasonable manner, can we take timely and effective measures to prevent mine flooding from taking place. In our investigation quantification（H） theory is used to study the risk prediction problem about mine flooding. By investigating the main factors which affect mine flooding, eight risk assessment items have been identified. The extent of risk is classified into 4 grades. Given the data from different periods in the Feicheng mining area, a prediction model for the risk of mine flooding is established. The test analysis indicates a model correlation coefficient of 0.97 and the incidence of discrimination is as high as 97.37%, which implies that the effect of the model is quite satisfactory. With the help of computers, this method can be widely applied.展开更多
The study of dynamical behavior of water or gas flows in broken rock is a basic research topic among a series of key projects about stability control of the surrounding rocks in mines and the prevention of some disast...The study of dynamical behavior of water or gas flows in broken rock is a basic research topic among a series of key projects about stability control of the surrounding rocks in mines and the prevention of some disasters such as water inrush or gas outburst and the protection of the groundwater resource. It is of great theoretical and engineering importance in respect of promo- tion of security in mine production and sustainable development of the coal industry. According to the non-Darcy property of seepage flow in broken rock dynamic equations of non-Darcy and non-steady flows in broken rock are established. By dimensionless transformation, the solution diagram of steady-states satisfying the given boundary conditions is obtained. By numerical analysis of low relaxation iteration, the dynamic responses corresponding to the different flow parameters have been obtained. The stability analysis of the steady-states indicate that a saddle-node bifurcaton exists in the seepage flow system of broken rock. Consequently, using catastrophe theory, the fold catastrophe model of seepage flow instability has been obtained. As a result, the bifurcation curves of the seepage flow systems with different control parameters are presented and the standard potential function is also given with respect to the generalized state variable for the fold catastrophe of a dynamic system of seepage flow in broken rock.展开更多
MFIRE, an underground mine fire simulation program developed in 1980＇s, is a tool that can be used to simulate the impacts of a mine fire event to a mine ventilation network. However, the lack of the abilities to sim...MFIRE, an underground mine fire simulation program developed in 1980＇s, is a tool that can be used to simulate the impacts of a mine fire event to a mine ventilation network. However, the lack of the abilities to simulate some of the important mine fire phenomena realistically hindered its wide applications. This research carried out to improve and upgrade the MFIRE 2.20 program to MFIRE 2.30. The new additions of MFIRE 2.30 including a time dependent fire model, smoke rollback prediction, the incorporation of a moving fire source, and a rewriting of MFIRE in Microsoft Visual C＋＋ were interpreted.展开更多
Based on the equation of the gas flow continuity and state, Darcy law and Langmuir equation, the law of methane seepage in the wall of drainage roadway was studied. The governing equation of methane one-way seepage in...Based on the equation of the gas flow continuity and state, Darcy law and Langmuir equation, the law of methane seepage in the wall of drainage roadway was studied. The governing equation of methane one-way seepage in the seam was founded. By solving the equation, the calculation of methane seepage velocity in the coal wall was worked out. The result has really applied worth and will give beneficial references to re-lated research, it provides preventing coal and gas outbursts with theoretical gist.展开更多
A real-time Diesel Particulate Matter （DPM） monitor has been developed on the base of the successful National In- stitute of Occupational Health and Safety （NIOSH） designed Personal Dust Monitor （PDM） unit. The ...A real-time Diesel Particulate Matter （DPM） monitor has been developed on the base of the successful National In- stitute of Occupational Health and Safety （NIOSH） designed Personal Dust Monitor （PDM） unit. The objectives of a recently completed Australian Coal Association Research Program （ACARP） study was to modify the PDM to measure the submicrometre fraction of the aerosol in a real-time monitoring underground instrument. Mine testing focused on use of the monitor in engineering evaluations of Longwall （LW） moves demonstrated how DPM concentrations from vehicles fluctuate under varying ventilation and operational conditions. The strong influence of mine ventilation systems is reviewed. Correlation between the current SKC DPM measurement system and real-time DPM monitors were conducted and results from eight mines show a correlation between elemental carbon （EC） and the new monitor DPM mass ranging from 0.45 to 0.82 with R2〉0.86 in all but two cases. This differences in suspected to be due to variations from mine to mine in aspects such as mine atmospheric contamination, vehicle fleet variations, fuel type, engine maintenance, engine combustion efficiency, engine behavior or interference from other submicrometre aerosol. Real-time monitoring clearly reflects the movement of individual diesel vehicles and allows pin-pointing of high exposure zones such as those encountered where various vehicles engage in intense work in areas of constrained or difficult ventilation. DPM shift average monitoring approaches do not readily allow successful engineering evaluation exercises to determine acceptability of pollution levels. Identification of high DPM concentration zones allows efficient modification of mine ventilation, operator positioning and other work practices to reduce miners＇ exposures without waiting for laboratory analysis results.展开更多
This paper gives a brief review of the development of shaft sinking by artificial ground freezing since 1949 when new China was founded. Several shaft freezing schemes which have been successfully applied from the eco...This paper gives a brief review of the development of shaft sinking by artificial ground freezing since 1949 when new China was founded. Several shaft freezing schemes which have been successfully applied from the economic and safe viewpoints are presented. Current technology and some innovative techniques, especially the shaft lining which have experienced major improvements over the last four decades ,are briefly reviewed. The technique of the in-situ pour concrete incorporating ailica fume with higher early strength under low temperature curing conditions is described. The temperature field in shaft freezing and its finite difference solution are given in this paper. A recently developed method combining freeze wall model test with back analysis technique based on numerical simulation is also described.展开更多
基金Project 2006CB202200 supported by the National Basic Research Program of Chinathe National Major Project of Ministry of Education (304005)the Program for Changjiang Scholars and Innovative Research Team in University of China (NoIRT0656)
文摘This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.
基金Project 106084 supported by the Scientific and Technological Research of the Ministry of EducationBK2007701 by the Natural Science Foundation ofJisngsu Province2006CB2022010 by the National Basic Research Program of China and the Qing-lan Project of Jiangsu Province
文摘Hundreds of mine flooding accidents have occurred in China since the 1950s. These flooding accidents result in submerged working faces, even entire coal mines, leading to tremendous economic losses. It is reported that among 601 state-owned mines in China, 285 mines are exposed to water-inrush risks. The water pressure is becoming larger and larger with the increase of mining depth, leading to an increase of water-inrush hazards. Only when the risk of mine flooding is predicted in a reasonable manner, can we take timely and effective measures to prevent mine flooding from taking place. In our investigation quantification（H） theory is used to study the risk prediction problem about mine flooding. By investigating the main factors which affect mine flooding, eight risk assessment items have been identified. The extent of risk is classified into 4 grades. Given the data from different periods in the Feicheng mining area, a prediction model for the risk of mine flooding is established. The test analysis indicates a model correlation coefficient of 0.97 and the incidence of discrimination is as high as 97.37%, which implies that the effect of the model is quite satisfactory. With the help of computers, this method can be widely applied.
基金Projects 50490273 and 50674087 supported by the National Natural Science Foundation of ChinaBK2007029 by the Natural Science Foundation of Jiangsu Province
文摘The study of dynamical behavior of water or gas flows in broken rock is a basic research topic among a series of key projects about stability control of the surrounding rocks in mines and the prevention of some disasters such as water inrush or gas outburst and the protection of the groundwater resource. It is of great theoretical and engineering importance in respect of promo- tion of security in mine production and sustainable development of the coal industry. According to the non-Darcy property of seepage flow in broken rock dynamic equations of non-Darcy and non-steady flows in broken rock are established. By dimensionless transformation, the solution diagram of steady-states satisfying the given boundary conditions is obtained. By numerical analysis of low relaxation iteration, the dynamic responses corresponding to the different flow parameters have been obtained. The stability analysis of the steady-states indicate that a saddle-node bifurcaton exists in the seepage flow system of broken rock. Consequently, using catastrophe theory, the fold catastrophe model of seepage flow instability has been obtained. As a result, the bifurcation curves of the seepage flow systems with different control parameters are presented and the standard potential function is also given with respect to the generalized state variable for the fold catastrophe of a dynamic system of seepage flow in broken rock.
文摘MFIRE, an underground mine fire simulation program developed in 1980＇s, is a tool that can be used to simulate the impacts of a mine fire event to a mine ventilation network. However, the lack of the abilities to simulate some of the important mine fire phenomena realistically hindered its wide applications. This research carried out to improve and upgrade the MFIRE 2.20 program to MFIRE 2.30. The new additions of MFIRE 2.30 including a time dependent fire model, smoke rollback prediction, the incorporation of a moving fire source, and a rewriting of MFIRE in Microsoft Visual C＋＋ were interpreted.
文摘Based on the equation of the gas flow continuity and state, Darcy law and Langmuir equation, the law of methane seepage in the wall of drainage roadway was studied. The governing equation of methane one-way seepage in the seam was founded. By solving the equation, the calculation of methane seepage velocity in the coal wall was worked out. The result has really applied worth and will give beneficial references to re-lated research, it provides preventing coal and gas outbursts with theoretical gist.
文摘A real-time Diesel Particulate Matter （DPM） monitor has been developed on the base of the successful National In- stitute of Occupational Health and Safety （NIOSH） designed Personal Dust Monitor （PDM） unit. The objectives of a recently completed Australian Coal Association Research Program （ACARP） study was to modify the PDM to measure the submicrometre fraction of the aerosol in a real-time monitoring underground instrument. Mine testing focused on use of the monitor in engineering evaluations of Longwall （LW） moves demonstrated how DPM concentrations from vehicles fluctuate under varying ventilation and operational conditions. The strong influence of mine ventilation systems is reviewed. Correlation between the current SKC DPM measurement system and real-time DPM monitors were conducted and results from eight mines show a correlation between elemental carbon （EC） and the new monitor DPM mass ranging from 0.45 to 0.82 with R2〉0.86 in all but two cases. This differences in suspected to be due to variations from mine to mine in aspects such as mine atmospheric contamination, vehicle fleet variations, fuel type, engine maintenance, engine combustion efficiency, engine behavior or interference from other submicrometre aerosol. Real-time monitoring clearly reflects the movement of individual diesel vehicles and allows pin-pointing of high exposure zones such as those encountered where various vehicles engage in intense work in areas of constrained or difficult ventilation. DPM shift average monitoring approaches do not readily allow successful engineering evaluation exercises to determine acceptability of pollution levels. Identification of high DPM concentration zones allows efficient modification of mine ventilation, operator positioning and other work practices to reduce miners＇ exposures without waiting for laboratory analysis results.
文摘This paper gives a brief review of the development of shaft sinking by artificial ground freezing since 1949 when new China was founded. Several shaft freezing schemes which have been successfully applied from the economic and safe viewpoints are presented. Current technology and some innovative techniques, especially the shaft lining which have experienced major improvements over the last four decades ,are briefly reviewed. The technique of the in-situ pour concrete incorporating ailica fume with higher early strength under low temperature curing conditions is described. The temperature field in shaft freezing and its finite difference solution are given in this paper. A recently developed method combining freeze wall model test with back analysis technique based on numerical simulation is also described.
