Drilling and blasting play vital roles in opencast mining. These operations not only affect the cost of production directly but as well and significantly, the overall operational costs. This research was carried out t...Drilling and blasting play vital roles in opencast mining. These operations not only affect the cost of production directly but as well and significantly, the overall operational costs. This research was carried out to find a possible way of optimizing the drilling and blasting operations in an open pit mine of Somair (Société des Mines de l’Air), in the Niger Republic. In order to optimize the drilling operation, the time taken by two drilling machines to accomplish the same task was analyzed statistically. The result indicates that the Down the Hole Hammer Drilling Rig (DMNo406) is more efficient than the Drill Master (DM405). The relative unit consumption of two explosives (Explus and Nitram 9), when used under the same operating conditions, were also considered and the results indicate Explus to be more economical per unit consumption with a range of 0.15 g/t–0.183 g/t, when compared with Nitram 9 with a unit consumption range of 0.19 g/t-0.24 g/t in the study area.展开更多
Improvement of coking properties of sub-bituminous coal (A) and bituminous coal (B) was done using blended organic solvents, namely, n-methyl-2-pyrrolidinone (NMP) and ethylenediamine (EDA). Various solvent bl...Improvement of coking properties of sub-bituminous coal (A) and bituminous coal (B) was done using blended organic solvents, namely, n-methyl-2-pyrrolidinone (NMP) and ethylenediamine (EDA). Various solvent blends were employed for the coal extraction under the total reflux condition. A low-cost ceramic membrane was fabricated using industrial waste iron ore slime of M/s TATA steel R&D, Jamshedpur (India) to separate out the dissolved coking fraction from the solvent-coal mixture. Membrane separations were carried out in a batch cell, and around 75 % recovered NMP was reused. The fractionated coal properties were determined using proximate and ultimate analyses. In the case of bituminous coal, the ash and sulfur contents were decreased by 99.3 % and 79.2 %, respectively, whereas, the carbon content was increased by 23.9 % in the separated coal fraction. Three different cleaning agents, namely deionized water, sodium dodecyl sulphate and NMP were used to regain the original membrane permeability for the reusing.展开更多
文摘Drilling and blasting play vital roles in opencast mining. These operations not only affect the cost of production directly but as well and significantly, the overall operational costs. This research was carried out to find a possible way of optimizing the drilling and blasting operations in an open pit mine of Somair (Société des Mines de l’Air), in the Niger Republic. In order to optimize the drilling operation, the time taken by two drilling machines to accomplish the same task was analyzed statistically. The result indicates that the Down the Hole Hammer Drilling Rig (DMNo406) is more efficient than the Drill Master (DM405). The relative unit consumption of two explosives (Explus and Nitram 9), when used under the same operating conditions, were also considered and the results indicate Explus to be more economical per unit consumption with a range of 0.15 g/t–0.183 g/t, when compared with Nitram 9 with a unit consumption range of 0.19 g/t-0.24 g/t in the study area.
文摘Improvement of coking properties of sub-bituminous coal (A) and bituminous coal (B) was done using blended organic solvents, namely, n-methyl-2-pyrrolidinone (NMP) and ethylenediamine (EDA). Various solvent blends were employed for the coal extraction under the total reflux condition. A low-cost ceramic membrane was fabricated using industrial waste iron ore slime of M/s TATA steel R&D, Jamshedpur (India) to separate out the dissolved coking fraction from the solvent-coal mixture. Membrane separations were carried out in a batch cell, and around 75 % recovered NMP was reused. The fractionated coal properties were determined using proximate and ultimate analyses. In the case of bituminous coal, the ash and sulfur contents were decreased by 99.3 % and 79.2 %, respectively, whereas, the carbon content was increased by 23.9 % in the separated coal fraction. Three different cleaning agents, namely deionized water, sodium dodecyl sulphate and NMP were used to regain the original membrane permeability for the reusing.