In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, whi...In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, which is hydrothermally treated at about 104 ℃, and the liquid/solid ratio was controlled at 6：1. In order to control Si/Al molar ratio, SiO2 or Al2O3 powers were added to the fly ash. The results of XRD and SEM show that the alkali melted can activate fly ash and eliminate its quartz and mullite, along with the improvement of Si/Al molar ratio and alkalinity. In addition, zeolite Na-A changes into sodalite gradually, and nepheline is the synthesized intermediate product. Those results were discussed on the basis of a formation mechanism of zeolite from fly ash.展开更多
Available silicone was melted from coal gangue samples from Hancheng dig- gings through calcination, digestion, and other means. The best calcination temperature was determined from a range of 550-1 150 ℃; and the be...Available silicone was melted from coal gangue samples from Hancheng dig- gings through calcination, digestion, and other means. The best calcination temperature was determined from a range of 550-1 150 ℃; and the best time, from a range of 0.5-5 h by colorimetry method. The proper ratio of coal gangue, limestone, sodium carbonate, and caustic soda was then determined through orthogonal experiment. The results show that the proper extraction condition for available silicone is the ratio of coal gangue, limestone, sodium carbonate, and caustic soda at 1：0.5：0.1：0.05, calcination temperature at 700 ℃, and calcination time at 2 h. In this condition, the available silicone content can be more than 19.65%.展开更多
To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, ...To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, which will create favorable conditions for moving bed continuous gasification of briquette with oxygen-rich air. The effects of A1203, SiO2, kaolin, dry powder and bentonite on ash fusibility temperatures were studied, based upon the relationship between briquette ash components and ash fusibility. The results show that the increasing of ash fusibility temperatures by adding the same amount （11%, w） of refractory agents follows the sequence of SiO2, bentonite, dry powder, kaolin, A1203, with the softening temperatures being elevated by 37.2, 57.6, 60.4, 82.6 and 104.4℃. With the same ratio of SIO2/A1203 in briquette, adding the A1203 component is more effective than SiO2 for raising ash fusibility temperatures. In this paper, inexpensive kaolin and bentonite rich in A1203 are found to be better refractory agents, and the suitable adding quantities are 9% and 11%, respectively.展开更多
In this study, SCM （supplementary cementitious materials）, such as nano silica, micro silica, fly ash and bottom ash, have been evaluated for optimal level of replacement as blending material in cement and concrete....In this study, SCM （supplementary cementitious materials）, such as nano silica, micro silica, fly ash and bottom ash, have been evaluated for optimal level of replacement as blending material in cement and concrete. The physical and chemical properties of the above materials were first analyzed. This study focused on compressive strength of concrete with different mixes at different ages. In many cases, products made with fly ash, micro silica, nano silica and bottom ash perform better than products made without them. Test results obtained in this study indicate that up to 5% nano silica, 10% micro silica, 20-30% fly ash and 10% bottom ash could be advantageously blended with cement without adversely affecting the strength. However, optimum levels of these materials are 1-3% nano silica, 3-8% micro silica, 10% fly ash and 5% of bottom ash when we consider the strength of concrete. All percentages are defined by weight unless otherwise mentioned.展开更多
基金Supported by the Henan Outstanding Youth Science Fund (0612002400)
文摘In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, which is hydrothermally treated at about 104 ℃, and the liquid/solid ratio was controlled at 6：1. In order to control Si/Al molar ratio, SiO2 or Al2O3 powers were added to the fly ash. The results of XRD and SEM show that the alkali melted can activate fly ash and eliminate its quartz and mullite, along with the improvement of Si/Al molar ratio and alkalinity. In addition, zeolite Na-A changes into sodalite gradually, and nepheline is the synthesized intermediate product. Those results were discussed on the basis of a formation mechanism of zeolite from fly ash.
基金Supported by Education Department Project of Shannxi Province(06JK238)
文摘Available silicone was melted from coal gangue samples from Hancheng dig- gings through calcination, digestion, and other means. The best calcination temperature was determined from a range of 550-1 150 ℃; and the best time, from a range of 0.5-5 h by colorimetry method. The proper ratio of coal gangue, limestone, sodium carbonate, and caustic soda was then determined through orthogonal experiment. The results show that the proper extraction condition for available silicone is the ratio of coal gangue, limestone, sodium carbonate, and caustic soda at 1：0.5：0.1：0.05, calcination temperature at 700 ℃, and calcination time at 2 h. In this condition, the available silicone content can be more than 19.65%.
文摘To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, which will create favorable conditions for moving bed continuous gasification of briquette with oxygen-rich air. The effects of A1203, SiO2, kaolin, dry powder and bentonite on ash fusibility temperatures were studied, based upon the relationship between briquette ash components and ash fusibility. The results show that the increasing of ash fusibility temperatures by adding the same amount （11%, w） of refractory agents follows the sequence of SiO2, bentonite, dry powder, kaolin, A1203, with the softening temperatures being elevated by 37.2, 57.6, 60.4, 82.6 and 104.4℃. With the same ratio of SIO2/A1203 in briquette, adding the A1203 component is more effective than SiO2 for raising ash fusibility temperatures. In this paper, inexpensive kaolin and bentonite rich in A1203 are found to be better refractory agents, and the suitable adding quantities are 9% and 11%, respectively.
文摘In this study, SCM （supplementary cementitious materials）, such as nano silica, micro silica, fly ash and bottom ash, have been evaluated for optimal level of replacement as blending material in cement and concrete. The physical and chemical properties of the above materials were first analyzed. This study focused on compressive strength of concrete with different mixes at different ages. In many cases, products made with fly ash, micro silica, nano silica and bottom ash perform better than products made without them. Test results obtained in this study indicate that up to 5% nano silica, 10% micro silica, 20-30% fly ash and 10% bottom ash could be advantageously blended with cement without adversely affecting the strength. However, optimum levels of these materials are 1-3% nano silica, 3-8% micro silica, 10% fly ash and 5% of bottom ash when we consider the strength of concrete. All percentages are defined by weight unless otherwise mentioned.
