A new kind of phenyl-functionalized magnetic fibrous mesoporous silica(Fe3 O4@Si O2@KCC-1-phenyl) was prepared by copolymerization as an efficient adsorbent for the magnetic extraction of phthalate esters from environ...A new kind of phenyl-functionalized magnetic fibrous mesoporous silica(Fe3 O4@Si O2@KCC-1-phenyl) was prepared by copolymerization as an efficient adsorbent for the magnetic extraction of phthalate esters from environmental water samples. The obtained Fe3 O4@Si O2@KCC-1-phenyl showed monodisperse fibrous spherical morphology, fairly strong magnetic response(29 emu/g), and an abundant π-electron system, which allowed rapid isolation of the Fe3 O4@Si O2@KCC-1-phenyl from solutions upon applying an appropriate magnetic field. Several variables that affect the extraction efficiency of the analytes,including the type of the elution solvent, amount of adsorbent, extraction time and reusability, were investigated and optimized. Under optimum conditions, the Fe3 O4@Si O2@KCC-1-phenyl was used for the extraction of four phthalate esters from environmental water samples followed by high-performance liquid chromatographic analysis. Validation experiments indicated that the developed method presented good linearity(0.1-20 ng/m L), low limit of detection(7.5-29 μg/L, S/N =3). The proposed method was applied to the determination of phthalate esters in different real water samples, with relative recoveries of 93%-103.4%and relative standard deviation of 0.8%-8.3%.展开更多
Amine-functionalized mesoporous silica was prepared by using lauric acid and N-stearoyl-l-glutamic acid as structure directing agents via the S-N+-I- mechanism and applied to CO2 adsorption at room temperature. With ...Amine-functionalized mesoporous silica was prepared by using lauric acid and N-stearoyl-l-glutamic acid as structure directing agents via the S-N+-I- mechanism and applied to CO2 adsorption at room temperature. With γ-aminopropyltriethoxysilane as co-structure directing agent and due to the direct electrostatic interaction with anionic surfactant, most of the amino groups were uniformly distributed at the inner surface of pores and the per- formance was stable. The amine-functionalized mesoporous silica was characterized by Fourier transform infrared spectrometer, X-ray diffraction, nitrogen physisorption and thermogravimetric analysis. The CO2 adsorption capacity was measured by digital recording balance. At the room temperature and under the atmospheric pressure, the adsorption capacity of LAA-AMS-0.2 for CO2 and N2 is 1.40 mmol·g-1 and 0.03 mmol·g-1, respectively, indicating high separation coefficient of CO2/N2.展开更多
Functionalized magnetic Fe_3O_4@SiO_2 composite nanoparticles were prepared by simply embedding iron oxide nanoparticles into MCM-41 through one-step synthesis process, followed by aminopropyls grafting on the mesopor...Functionalized magnetic Fe_3O_4@SiO_2 composite nanoparticles were prepared by simply embedding iron oxide nanoparticles into MCM-41 through one-step synthesis process, followed by aminopropyls grafting on the mesopore channels, aiming to efficiently and conveniently uptake U(VI) from aqueous solution. The resultant material possesses highly ordered mesoporous structure with large surface area, uniform pore size, excellent thermal stability, quick magnetic response, and desirable acids resistance, confirmed by Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM), N_2 adsorption/desorption experiments, powder X-ray diffraction(PXRD), and thermogravimetric analysis(TGA). Detailed U(VI) sorption test indicated that this material is indeed an effective U(VI) sorbent with fast sorption kinetics of less than 2 h, large sorption capacity of 160 mg/g at p H 5.0±0.1, and desirable selectivity towards U(VI) ions over a range of competing metal ions. The absorbed U(VI) can be easily desorbed by 0.01 mol/L or more concentrated HNO_3 solution, and the reclaimed sorbent can be reused with no obvious decrease of sorption capacity even after 4 sorption-desorption cycles. The present results suggest the vast opportunities of this kind of magnetic composite on the solid-phase extraction of U(VI).展开更多
A novel approach is designed to optimize the synthesis of sulfonic-functionalized silica material. Results from 29Si and 27AI NMR suggest that the AI acts as the bridging atom connecting the methanesulfonate and silic...A novel approach is designed to optimize the synthesis of sulfonic-functionalized silica material. Results from 29Si and 27AI NMR suggest that the AI acts as the bridging atom connecting the methanesulfonate and silica matrix. Further pyridine-FTIR spectra followed by catalytic activity tests demonstrate that compared with previous methods, our new approach results in higher Lewis acid site concentration, higher thermal stability and superior catalytic activity. Moreover, the whole catalysis preparation procedure is environmentally friendly. Specifically, the silica matrix is synthesized through hydrolysis of tetrae- thylorthosilicate employing formic acid as hydro-catalyst, in which no surfactant species or precursors were involved.展开更多
基金supported by the Commonwealth Scientific Foundation for Industry of Chinese Inspection and Quarantine (No.201210071) of the Ministry of National Science and Technology of ChinaChongqing Key Laboratory of Scientific Utilization of Tobacco Resources
文摘A new kind of phenyl-functionalized magnetic fibrous mesoporous silica(Fe3 O4@Si O2@KCC-1-phenyl) was prepared by copolymerization as an efficient adsorbent for the magnetic extraction of phthalate esters from environmental water samples. The obtained Fe3 O4@Si O2@KCC-1-phenyl showed monodisperse fibrous spherical morphology, fairly strong magnetic response(29 emu/g), and an abundant π-electron system, which allowed rapid isolation of the Fe3 O4@Si O2@KCC-1-phenyl from solutions upon applying an appropriate magnetic field. Several variables that affect the extraction efficiency of the analytes,including the type of the elution solvent, amount of adsorbent, extraction time and reusability, were investigated and optimized. Under optimum conditions, the Fe3 O4@Si O2@KCC-1-phenyl was used for the extraction of four phthalate esters from environmental water samples followed by high-performance liquid chromatographic analysis. Validation experiments indicated that the developed method presented good linearity(0.1-20 ng/m L), low limit of detection(7.5-29 μg/L, S/N =3). The proposed method was applied to the determination of phthalate esters in different real water samples, with relative recoveries of 93%-103.4%and relative standard deviation of 0.8%-8.3%.
基金Supported by Tianjin Hi-tech Support Program Key Projects, China (2009F3-0005)
文摘Amine-functionalized mesoporous silica was prepared by using lauric acid and N-stearoyl-l-glutamic acid as structure directing agents via the S-N+-I- mechanism and applied to CO2 adsorption at room temperature. With γ-aminopropyltriethoxysilane as co-structure directing agent and due to the direct electrostatic interaction with anionic surfactant, most of the amino groups were uniformly distributed at the inner surface of pores and the per- formance was stable. The amine-functionalized mesoporous silica was characterized by Fourier transform infrared spectrometer, X-ray diffraction, nitrogen physisorption and thermogravimetric analysis. The CO2 adsorption capacity was measured by digital recording balance. At the room temperature and under the atmospheric pressure, the adsorption capacity of LAA-AMS-0.2 for CO2 and N2 is 1.40 mmol·g-1 and 0.03 mmol·g-1, respectively, indicating high separation coefficient of CO2/N2.
基金supported by the National Natural Science Foundation of China (11275219, 11275090, U1432103)the “Strategic Priority Research program” of the Chinese Academy of Sciences (XDA030104)+1 种基金the State Key Laboratory of NBC Protection for Civilian (SKLNB201412)the Scientific Research Fund of Hunan Provincial Education Department (12A116)
文摘Functionalized magnetic Fe_3O_4@SiO_2 composite nanoparticles were prepared by simply embedding iron oxide nanoparticles into MCM-41 through one-step synthesis process, followed by aminopropyls grafting on the mesopore channels, aiming to efficiently and conveniently uptake U(VI) from aqueous solution. The resultant material possesses highly ordered mesoporous structure with large surface area, uniform pore size, excellent thermal stability, quick magnetic response, and desirable acids resistance, confirmed by Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM), N_2 adsorption/desorption experiments, powder X-ray diffraction(PXRD), and thermogravimetric analysis(TGA). Detailed U(VI) sorption test indicated that this material is indeed an effective U(VI) sorbent with fast sorption kinetics of less than 2 h, large sorption capacity of 160 mg/g at p H 5.0±0.1, and desirable selectivity towards U(VI) ions over a range of competing metal ions. The absorbed U(VI) can be easily desorbed by 0.01 mol/L or more concentrated HNO_3 solution, and the reclaimed sorbent can be reused with no obvious decrease of sorption capacity even after 4 sorption-desorption cycles. The present results suggest the vast opportunities of this kind of magnetic composite on the solid-phase extraction of U(VI).
文摘A novel approach is designed to optimize the synthesis of sulfonic-functionalized silica material. Results from 29Si and 27AI NMR suggest that the AI acts as the bridging atom connecting the methanesulfonate and silica matrix. Further pyridine-FTIR spectra followed by catalytic activity tests demonstrate that compared with previous methods, our new approach results in higher Lewis acid site concentration, higher thermal stability and superior catalytic activity. Moreover, the whole catalysis preparation procedure is environmentally friendly. Specifically, the silica matrix is synthesized through hydrolysis of tetrae- thylorthosilicate employing formic acid as hydro-catalyst, in which no surfactant species or precursors were involved.
