A kind of neat asphalt and three kinds of diatomite asphalt are tested using differential scanning calorimetry（DSC）. The anti-cracking mechanism of diatomite asphalt is analyzed by DSC and the thermal stress restrai...A kind of neat asphalt and three kinds of diatomite asphalt are tested using differential scanning calorimetry（DSC）. The anti-cracking mechanism of diatomite asphalt is analyzed by DSC and the thermal stress restrained specimen test（TSRST） of the asphalt mixtures. The results show that the low temperature performance of diatomite asphalt is better than that of neat asphalt. The glass transition temperature can reflect the low temperature performance of the diatomite asphalt better and has a good relationship with breaking temperatures. Besides, the TSRST, the bending test, the compressing test and the contraction coefficient test are used to study the low temperature performance of the diatomite asphalt mixture. The results prove that the low temperature performance of the diatomite asphalt mixture is better than that of the neat asphalt mixture. The critical bending strain energy density and the compressing strain energy density of the diatomite asphalt mixture are greater than those of the neat asphalt mixture. After adding diatomite to the asphalt mixture, the contraction coefficient is reduced. Based on the above results, the anti-cracking mechanism of the diatomite asphalt mixture is analyzed from the angle of contraction performance and breaking energy.展开更多
Low-temperature sintering and properties of LTCC （low temperature co-fired ceramics） materials based on CaO-BaO-Al2O3-B2O3-SiO2 glass and various fillers such as Al2O3, silica glass, christobalite, AlN, ZrO2, MgO-Si...Low-temperature sintering and properties of LTCC （low temperature co-fired ceramics） materials based on CaO-BaO-Al2O3-B2O3-SiO2 glass and various fillers such as Al2O3, silica glass, christobalite, AlN, ZrO2, MgO-SiO2, TiO2 were investigated. The results show that densification, crystallization, microstructures and dielectric properties of the composites are found to strongly depend on the type of filler. The densification process of glass/ceramic composites with various fillers is mainly from 600 ℃ to 925 ℃, and the initial compacting temperature of samples is 600 ℃. The initial rapid densification of samples starts at its glass softening temperature. LTCC compositions containing Al2O3, silica glass, AlN and MgO-SiO2 fillers start to have the crystallization peaks at 890, 903, 869 and 844 ℃, respectively. The crystallization peaks are believed as correlated to the crystallization of CaAl2SiO8, β-SiO2, Ca2Al2SiO7 and β-SiO2. The composite ceramic with Al2O3, silica glass and TiO2 ceramic have a better dense structure and better smooth fracture surface. Sample for Al2O3 has the lowest dielectric loss tanδ value of 0.00091, whereas the sample for MgO.SiO, has the highest dielectric loss tanδ value of 0.02576. The sample for TiO2 has the highest dielectric constant value of 14.46, whereas the sample for AIN has the lowest dielectric constant value of 4.61.展开更多
The interaction mechanism between sodium arsenate and fayalite-type copper slag at 1200℃was investigated through XRD,XPS,HRTEM,TCLP and other technical means and methods.The results indicated that the proportions of ...The interaction mechanism between sodium arsenate and fayalite-type copper slag at 1200℃was investigated through XRD,XPS,HRTEM,TCLP and other technical means and methods.The results indicated that the proportions of sodium arsenate in the slag and flue gas phases were approximately 30%and 70%,respectively.The addition of sodium arsenate depolymerized the fayalite structure and changed it from a crystalline state to an amorphous state.The fayalite structural changes indicated that the[AsO_(4)]tetrahedron in sodium arsenate combined with the[SiO_(4)]tetrahedron and[FeO_(4)]tetrahedron through bridging oxygen to form a silicate glass structure.The TCLP test results of the samples before and after the high temperature reaction of fayalite and sodium arsenate showed that after high temperature reaction,fayalite could effectively reduce the leaching toxicity of sodium arsenate,reducing the leaching concentration of arsenic from 3025.52 to 12.8 mg/L before and after reaction,respectively.展开更多
The dissolution behavior of CaO-MgO-SiO2 glass fiber was investigated by scanning electron microscopy （SEM）, Fourier-transform infrared spectrometer （FTIR） and inductively coupled plasma atomic emission spectrosco...The dissolution behavior of CaO-MgO-SiO2 glass fiber was investigated by scanning electron microscopy （SEM）, Fourier-transform infrared spectrometer （FTIR） and inductively coupled plasma atomic emission spectroscopy （ICP-AES） using in-vitro tests. The results show that the soaked fiber is surrounded by an outer calcium-magnesium silicate hydrated layer, and there exists a balancing fimction between the formation and abscission of the hydrated layer during the dissolution process. The concentrations of leached ions increase constantly, and the mass loss of the fibers and pH changes of the solution are found to rise rapidly during the initial dissolution process, then their increasing rates are controlled by the balancing function of the hydrated layer at the subsequent dissolution stages. The dissolution rate constant and time for complete dissolution are estimated to be 274 ng/（cm2.h） and 15.2 d, respectively, presenting preferable biosolubilities.展开更多
The chemical compositions of Ag-Er co-doped phosphate and silicate glasses were investigated with X-ray photoelectron spectroscopy with the purpose to identify the chemical state of silver. The analysis of the Ag 3d c...The chemical compositions of Ag-Er co-doped phosphate and silicate glasses were investigated with X-ray photoelectron spectroscopy with the purpose to identify the chemical state of silver. The analysis of the Ag 3d core lines show the presence of nanometer-sized silver particles in each of the annealed samples,even if these Ag 3d lines appear to be very different from each other. We explain these results as a different interaction of silver with the two glasses matrix,which leads to a different nucleation rate of the Ag clusters.展开更多
Glass from a light bulb is a waste product that cannot be utilised in a traditional way. This study looks into the possibilities of using lamp borosilicate glass powder as a cement replacing admixture in conventional ...Glass from a light bulb is a waste product that cannot be utilised in a traditional way. This study looks into the possibilities of using lamp borosilicate glass powder as a cement replacing admixture in conventional concrete. Experimental work provides preparation of standard concrete samples and sample testing after seven and 28-day ageing periods in standard conditions. The following glass materials were used for cement replacement： rough ground glass powder, glass dust from filters （both materials were obtained from a glass treatment plant） and additionally ground glass powder. The effect of glass powder on cement setting time was studied. The experimental results indicate that replacement of cement by rough glass powder decreases the compressive strength. Fine glass particles make it possible to replace up to 20% of cement without the loss in strength characteristics. Fine glass powder offers a long-term hardening effect. The best compressive strength results were achieved by using the glass that was additionally ground for 60 minutes. Glass dust obtained from filters shows a less significant effect. Summarising the research findings it may be concluded that ground borosilicate lamp glass may be successfully applied as a micro-filler for concrete as cement replacing material.展开更多
Improving cell efficiency and increasing throughput in solar cell industry efforts were put on uniform texturization and optimum diffusion process. To reduce reflectivity, NaOH/KOH （sodium hydroxide/potassium hydrox...Improving cell efficiency and increasing throughput in solar cell industry efforts were put on uniform texturization and optimum diffusion process. To reduce reflectivity, NaOH/KOH （sodium hydroxide/potassium hydroxide） and IPA （isopropyl alcohol） are widely used in standard alkaline texturization of mono c-Si （crystalline silicon） （〈100〉 crystal orientation） wafers, where IPA promotes formation of uniform pyramidal structure but leads to unstable process. In this work, carbohydrates have been investigated as an additive in etchant solution. Moreover uniform phosphorus diffusion process for B2B （back to back） diffusion （loading two wafers in one single slot of quartz boat） has been investigated with single and multiple temperature plateaus. Impact of pre-oxygen step on phosphorus diffusion is investigated in which number of inactive phosphorus at the PSG （phosphosilicate glass）-Si interface is reduced. A batch of 156 PSQ （pseudo square） mono c-Si solar cells with 18%-18.20% efficiency was fabricated which is -0.3% higher than the standard process. The EL （electroluminescence image）, reff （carrier effective life time）, Voc （open circuit voltage）, Isc （short circuit current）, Pvk （peak power） and r/ （efficiency） have been examined and compared with standard.展开更多
基金The National Natural Science Foundation of China(No.50778057)
文摘A kind of neat asphalt and three kinds of diatomite asphalt are tested using differential scanning calorimetry（DSC）. The anti-cracking mechanism of diatomite asphalt is analyzed by DSC and the thermal stress restrained specimen test（TSRST） of the asphalt mixtures. The results show that the low temperature performance of diatomite asphalt is better than that of neat asphalt. The glass transition temperature can reflect the low temperature performance of the diatomite asphalt better and has a good relationship with breaking temperatures. Besides, the TSRST, the bending test, the compressing test and the contraction coefficient test are used to study the low temperature performance of the diatomite asphalt mixture. The results prove that the low temperature performance of the diatomite asphalt mixture is better than that of the neat asphalt mixture. The critical bending strain energy density and the compressing strain energy density of the diatomite asphalt mixture are greater than those of the neat asphalt mixture. After adding diatomite to the asphalt mixture, the contraction coefficient is reduced. Based on the above results, the anti-cracking mechanism of the diatomite asphalt mixture is analyzed from the angle of contraction performance and breaking energy.
基金Project supported by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions ChinaProject(CXZZ12_0415) supported by Innovation Foundation for Graduate Students of Jiangsu Province ChinaProject(IRT1146) supported by Changjiang Scholars and Innovative Research Team in University(PCSIRT),China
文摘Low-temperature sintering and properties of LTCC （low temperature co-fired ceramics） materials based on CaO-BaO-Al2O3-B2O3-SiO2 glass and various fillers such as Al2O3, silica glass, christobalite, AlN, ZrO2, MgO-SiO2, TiO2 were investigated. The results show that densification, crystallization, microstructures and dielectric properties of the composites are found to strongly depend on the type of filler. The densification process of glass/ceramic composites with various fillers is mainly from 600 ℃ to 925 ℃, and the initial compacting temperature of samples is 600 ℃. The initial rapid densification of samples starts at its glass softening temperature. LTCC compositions containing Al2O3, silica glass, AlN and MgO-SiO2 fillers start to have the crystallization peaks at 890, 903, 869 and 844 ℃, respectively. The crystallization peaks are believed as correlated to the crystallization of CaAl2SiO8, β-SiO2, Ca2Al2SiO7 and β-SiO2. The composite ceramic with Al2O3, silica glass and TiO2 ceramic have a better dense structure and better smooth fracture surface. Sample for Al2O3 has the lowest dielectric loss tanδ value of 0.00091, whereas the sample for MgO.SiO, has the highest dielectric loss tanδ value of 0.02576. The sample for TiO2 has the highest dielectric constant value of 14.46, whereas the sample for AIN has the lowest dielectric constant value of 4.61.
基金the financial supports from the National Natural Science Foundation of China(No.51634010)National Key R&D Program of China(No.2018YFC1900300).
文摘The interaction mechanism between sodium arsenate and fayalite-type copper slag at 1200℃was investigated through XRD,XPS,HRTEM,TCLP and other technical means and methods.The results indicated that the proportions of sodium arsenate in the slag and flue gas phases were approximately 30%and 70%,respectively.The addition of sodium arsenate depolymerized the fayalite structure and changed it from a crystalline state to an amorphous state.The fayalite structural changes indicated that the[AsO_(4)]tetrahedron in sodium arsenate combined with the[SiO_(4)]tetrahedron and[FeO_(4)]tetrahedron through bridging oxygen to form a silicate glass structure.The TCLP test results of the samples before and after the high temperature reaction of fayalite and sodium arsenate showed that after high temperature reaction,fayalite could effectively reduce the leaching toxicity of sodium arsenate,reducing the leaching concentration of arsenic from 3025.52 to 12.8 mg/L before and after reaction,respectively.
基金Projects(50872098, 51004080) supported by the National Natural Science Foundation of ChinaProject(B0903) supported by the Opening Fund of Research Center of Green Manufacturing and Energy-saving & Emission Reduction Technology of Wuhan University of Science and Technology, China
文摘The dissolution behavior of CaO-MgO-SiO2 glass fiber was investigated by scanning electron microscopy （SEM）, Fourier-transform infrared spectrometer （FTIR） and inductively coupled plasma atomic emission spectroscopy （ICP-AES） using in-vitro tests. The results show that the soaked fiber is surrounded by an outer calcium-magnesium silicate hydrated layer, and there exists a balancing fimction between the formation and abscission of the hydrated layer during the dissolution process. The concentrations of leached ions increase constantly, and the mass loss of the fibers and pH changes of the solution are found to rise rapidly during the initial dissolution process, then their increasing rates are controlled by the balancing function of the hydrated layer at the subsequent dissolution stages. The dissolution rate constant and time for complete dissolution are estimated to be 274 ng/（cm2.h） and 15.2 d, respectively, presenting preferable biosolubilities.
基金This work was partially supported by MIUR-FIRB (RBNE012N3X-005) and by PAT-FAPVU projects.
文摘The chemical compositions of Ag-Er co-doped phosphate and silicate glasses were investigated with X-ray photoelectron spectroscopy with the purpose to identify the chemical state of silver. The analysis of the Ag 3d core lines show the presence of nanometer-sized silver particles in each of the annealed samples,even if these Ag 3d lines appear to be very different from each other. We explain these results as a different interaction of silver with the two glasses matrix,which leads to a different nucleation rate of the Ag clusters.
文摘Glass from a light bulb is a waste product that cannot be utilised in a traditional way. This study looks into the possibilities of using lamp borosilicate glass powder as a cement replacing admixture in conventional concrete. Experimental work provides preparation of standard concrete samples and sample testing after seven and 28-day ageing periods in standard conditions. The following glass materials were used for cement replacement： rough ground glass powder, glass dust from filters （both materials were obtained from a glass treatment plant） and additionally ground glass powder. The effect of glass powder on cement setting time was studied. The experimental results indicate that replacement of cement by rough glass powder decreases the compressive strength. Fine glass particles make it possible to replace up to 20% of cement without the loss in strength characteristics. Fine glass powder offers a long-term hardening effect. The best compressive strength results were achieved by using the glass that was additionally ground for 60 minutes. Glass dust obtained from filters shows a less significant effect. Summarising the research findings it may be concluded that ground borosilicate lamp glass may be successfully applied as a micro-filler for concrete as cement replacing material.
文摘Improving cell efficiency and increasing throughput in solar cell industry efforts were put on uniform texturization and optimum diffusion process. To reduce reflectivity, NaOH/KOH （sodium hydroxide/potassium hydroxide） and IPA （isopropyl alcohol） are widely used in standard alkaline texturization of mono c-Si （crystalline silicon） （〈100〉 crystal orientation） wafers, where IPA promotes formation of uniform pyramidal structure but leads to unstable process. In this work, carbohydrates have been investigated as an additive in etchant solution. Moreover uniform phosphorus diffusion process for B2B （back to back） diffusion （loading two wafers in one single slot of quartz boat） has been investigated with single and multiple temperature plateaus. Impact of pre-oxygen step on phosphorus diffusion is investigated in which number of inactive phosphorus at the PSG （phosphosilicate glass）-Si interface is reduced. A batch of 156 PSQ （pseudo square） mono c-Si solar cells with 18%-18.20% efficiency was fabricated which is -0.3% higher than the standard process. The EL （electroluminescence image）, reff （carrier effective life time）, Voc （open circuit voltage）, Isc （short circuit current）, Pvk （peak power） and r/ （efficiency） have been examined and compared with standard.
