期刊文献+
共找到18篇文章
< 1 >
每页显示 20 50 100
仿生催化MOF材料的正极硫载体的设计及其在锂硫电池中的应用研究
1
作者 曾清涵 杨俊桦 李庆华 《材料研究与应用》 CAS 2024年第6期977-984,共8页
锂硫电池(LSBs)以1675 mAh·g^(-1)的高理论比容量和2600 Wh·kg^(-1)的高理论能量密度,被视为未来储能体系的有力竞争者。然而,LSBs在充放电过程中所产生的穿梭效应,导致多硫化物(LiPSs)在电解液中溶解和正极活性物质损失,从... 锂硫电池(LSBs)以1675 mAh·g^(-1)的高理论比容量和2600 Wh·kg^(-1)的高理论能量密度,被视为未来储能体系的有力竞争者。然而,LSBs在充放电过程中所产生的穿梭效应,导致多硫化物(LiPSs)在电解液中溶解和正极活性物质损失,从而引发容量衰减,严重限制了其实际应用。因此,设计具有高效催化活性的材料,以限制LiPSs扩散并加速其氧化还原反应动力学,被认为是解决上述问题的关键途径。虽然生物小分子催化剂具有优异的氧化还原特性,但在传统电解液中的高溶解性却限制了其循环稳定性。以金属团簇作为中心和有机配体作为连接单元所组成的金属-有机框架材料(MOFs),具有比表面积大、孔隙率高、孔结构高度有序、结构可调和可设计性等优势,通过分子工程设计有望在其纳米空间中实现对有机小分子催化剂的固定和精确调控。为此,基于仿生催化理念,设计了一种新型MOF(UiO-TECP),即将生物还原剂三(2-羧乙基)膦(TCEP)通过纳米限域策略固定于MOF孔道内,制备高效硫载体材料。其中,MOFs的有序孔道结构通过纳米限域作用来抑制LiPSs的扩散,而孔内固定的TECP能够有效促进二硫键的断裂,加速LiPSs的转化反应。电化学测试结果表明,基于S/UiO-TECP正极的LSBs在1C电流密度下实现了841.6 mAh·g^(-1)的初始放电比容量,并在500圈循环中保持极低的容量衰减率(每圈0.06%)。通过将仿生催化与MOF结构设计相结合,显著提升了LSBs的循环性能和动力学特性,为开发新型多功能硫载体材料提供了重要理论支撑与实践指导。 展开更多
关键词 电池 硫载体 正极 化物 金属-有机框架材料 仿生催化 穿梭效应 纳米限域
下载PDF
锂硫电池硫载体材料研究进展 被引量:2
2
作者 朱基亮 《四川师范大学学报(自然科学版)》 CAS 2023年第2期143-164,F0002,共23页
单质硫具有高理论比容量、丰富的储量、低成本和环境友好的特点,由硫正极和金属锂负极组成的锂硫电池能量密度可以达到1000 Wh/kg以上.然而,硫的绝缘性、穿梭效应和充放电过程中的体积剧变等限制了锂硫电池的应用.要同时解决这3个问题,... 单质硫具有高理论比容量、丰富的储量、低成本和环境友好的特点,由硫正极和金属锂负极组成的锂硫电池能量密度可以达到1000 Wh/kg以上.然而,硫的绝缘性、穿梭效应和充放电过程中的体积剧变等限制了锂硫电池的应用.要同时解决这3个问题,合理的硫载体材料设计是关键.结合近年来的相关文献报道,综述锂硫电池硫载体材料及其相应的电化学性能,展望硫载体材料的发展趋势. 展开更多
关键词 电池 硫载体材料 单质 电化学性能
下载PDF
石墨烯作为硫载体在锂硫电池中的研究进展 被引量:12
3
作者 张梦迪 陈蓓 吴明铂 《物理化学学报》 SCIE CAS CSCD 北大核心 2022年第2期49-61,共13页
锂硫电池因其超高的理论能量密度以及硫资源丰富、成本低廉、无毒的优点,被认为是极具发展潜力与应用前景的新一代储能设备。然而,硫正极导电性差、体积膨胀以及穿梭效应严重等问题严重制约了其商业化应用。石墨烯具有高比表面积、高导... 锂硫电池因其超高的理论能量密度以及硫资源丰富、成本低廉、无毒的优点,被认为是极具发展潜力与应用前景的新一代储能设备。然而,硫正极导电性差、体积膨胀以及穿梭效应严重等问题严重制约了其商业化应用。石墨烯具有高比表面积、高导电性和高柔韧性,并且易于进行表面化学修饰及组装,是一种理想的硫载体材料。本文主要综述了近年来三维石墨烯、表面化学修饰的石墨烯、石墨烯基复合材料以及石墨烯基柔性材料在锂硫电池正极中的研究现状,并展望了石墨烯作为硫载体在锂硫电池正极中的发展趋势。 展开更多
关键词 电池 硫载体 石墨烯 石墨烯基复合材料 柔性正极
下载PDF
不同硫载体对轮胎用NR胶料性能的影响 被引量:2
4
作者 苘辉刚 范汝良 +2 位作者 张青凯 Aihara T 纪奎江 《轮胎工业》 CAS 2001年第6期342-346,共5页
研究了添加不同硫载体化合物二辛基多硫代磷酸酯 (SDT/S)、二丁基二硫代磷酸锌 (TP/S)、二硫代己内酰胺 (S/G)、二硫代二吗啡啉 (M /G)以及SDT/S的用量对轮胎用NR胶料的加工性能、硫化特性、拉伸性能、动态生热和压缩永久变形等性能的... 研究了添加不同硫载体化合物二辛基多硫代磷酸酯 (SDT/S)、二丁基二硫代磷酸锌 (TP/S)、二硫代己内酰胺 (S/G)、二硫代二吗啡啉 (M /G)以及SDT/S的用量对轮胎用NR胶料的加工性能、硫化特性、拉伸性能、动态生热和压缩永久变形等性能的影响规律 ,并与传统硫黄硫化体系进行了比较。结果表明 ,加入SDT/S和TP/S会缩短门尼焦烧时间 ,但能提高硫化平坦模量和改善抗硫化返原能力 ;较低硫化温度 (145℃ )下 ,传统硫化体系赋予NR硫化胶较低的拉伸强度和 30 0 %定伸应力 ,提高硫化温度 (175℃ ) ,会使加入硫载体的NR硫化胶具有较高的拉伸性能保持率 ;加入SDT/S和提高其用量 ,可提高NR胶料的抗硫化返原性能 。 展开更多
关键词 天然橡胶 轮胎 NR 硫载体化合物 胶料性能 加工性能 化特性
下载PDF
用于锂硫电池高效硫载体的Co‑N‑C@KB复合材料的规模化制备策略
5
作者 陆小祥 黎天宝 +7 位作者 涂飞跃 李中良 朱徐锟 孙灿 靳亚超 宋力 张明道 曹晖 《无机化学学报》 SCIE CAS CSCD 北大核心 2021年第6期1125-1134,共10页
硫正极较差的性能严重阻碍了锂硫电池的商业化进程,这些因素包括较低的导电能力以及在促进多硫化物转化方面较差的催化活性。我们开发了一种基于配体调控合成和低温热解的规模化策略来制备高效的正极复合材料(Co‑N‑C@KB),这种材料由富含... 硫正极较差的性能严重阻碍了锂硫电池的商业化进程,这些因素包括较低的导电能力以及在促进多硫化物转化方面较差的催化活性。我们开发了一种基于配体调控合成和低温热解的规模化策略来制备高效的正极复合材料(Co‑N‑C@KB),这种材料由富含Co‑N‑C活性位点的科琴黑(KB)组成。原子级分散的Co‑N‑C活性位点被证明有利于多硫化物在正极的转化,因而可以提高锂硫电池的容量和循环寿命。基于此,Co‑N‑C@KB作为正极可以使锂硫电池获得高达1442 mAh·g^(-1)的初始放电容量,并且该电池在长时间的稳定性测试中具有出色的容量保持能力。 展开更多
关键词 电池 原子级分散的催化剂 碳材料 硫载体 吸附
下载PDF
硬质橡胶载体硫黄的制备及其在橡胶中的应用 被引量:2
6
作者 孙靖先 周静 +2 位作者 王虹 王益庆 张立群 《橡胶工业》 CAS 2016年第10期604-608,共5页
通过在橡胶中添加大量硫黄,采用低温硫化得到高玻璃化温度的硬质橡胶。硬质橡胶经粉碎、清洗、烘干得到载体硫黄,研究载体硫黄硫化胶的各项性能。结果表明:载体硫黄在其玻璃化温度以下温度时不参与硫化,能有效避免早期焦烧;在其玻璃化... 通过在橡胶中添加大量硫黄,采用低温硫化得到高玻璃化温度的硬质橡胶。硬质橡胶经粉碎、清洗、烘干得到载体硫黄,研究载体硫黄硫化胶的各项性能。结果表明:载体硫黄在其玻璃化温度以下温度时不参与硫化,能有效避免早期焦烧;在其玻璃化温度以上温度时正常参与硫化,其硫化胶的各项性能与不溶性硫黄硫化胶相近。载体硫黄能抑制混炼胶喷霜,且生产成本低,可替代不溶性硫黄。 展开更多
关键词 硬质橡胶 载体 早期焦烧 喷霜 不溶性
下载PDF
锂硫电池正极材料研究概况
7
作者 任新伟 《山东化工》 CAS 2024年第19期108-110,117,共4页
锂硫电池是最著名且研究最广泛的电池之一,它以硫为阴极,在地球上具有丰富的储量,其特点是能量密度高、理论比容量大、环境友好。尽管其具有许多优点,但同时也具有许多缺点,例如活性材料和放电中间体的非导电性、穿梭效应、硫阴极的体... 锂硫电池是最著名且研究最广泛的电池之一,它以硫为阴极,在地球上具有丰富的储量,其特点是能量密度高、理论比容量大、环境友好。尽管其具有许多优点,但同时也具有许多缺点,例如活性材料和放电中间体的非导电性、穿梭效应、硫阴极的体积效应等。本文详细阐述了硫碳复合材料、金属化合物复合材料、硫/导电聚合物以及金属有机框架四大硫载体材料,并深入分析了它们在锂硫电池充放电过程中所扮演的关键角色以及展现出的电化学性能。同时,本文也对这些材料未来可能的改进方向提出了建议,并对未来的发展前景进行了展望。 展开更多
关键词 电池 穿梭效应 硫载体材料
下载PDF
软丁腈橡胶(N41)新型平衡硫化体系研究 被引量:3
8
作者 刘大晨 周朋坤 《化工新型材料》 CAS CSCD 北大核心 2020年第3期166-169,共4页
通过对配合体系的探究,构建以硫载体二硫化二己内酰胺(DTDC)、硫化促进剂、硅烷偶联剂及硫磺为主体的新型平衡硫化体系;软丁腈橡胶(N41)应用这种新型的平衡硫化体系,拉伸强度最好可达29MPa,断裂伸长率超过500%,通过改变促进剂、硫磺和D... 通过对配合体系的探究,构建以硫载体二硫化二己内酰胺(DTDC)、硫化促进剂、硅烷偶联剂及硫磺为主体的新型平衡硫化体系;软丁腈橡胶(N41)应用这种新型的平衡硫化体系,拉伸强度最好可达29MPa,断裂伸长率超过500%,通过改变促进剂、硫磺和DTDC用量,分析各项物理机械性能,比较不同硫化体系下的动态性能,探究这种平衡硫化体系在软丁腈橡胶中的应用。 展开更多
关键词 软丁腈橡胶 高强度 硫载体化二己内酰胺 平衡化体系
下载PDF
锂硫电池过渡金属磷化物复合正极材料研究概述
9
作者 刘露之 黄杰盟 +4 位作者 赵超 李汶交 董鹏 张英杰 王丁 《有色设备》 2023年第1期5-11,共7页
低碳、环保、高效是21世纪社会发展的主旋律。原材料廉价易得的锂硫(Li-S)电池因其超高能量密度(2500 Wh·kg^(-1))而受到能源转化与储备设备研究者的瞩目。然而,锂硫电池绝缘的活性物质与循环过程中不可避免的穿梭效应导致其反应... 低碳、环保、高效是21世纪社会发展的主旋律。原材料廉价易得的锂硫(Li-S)电池因其超高能量密度(2500 Wh·kg^(-1))而受到能源转化与储备设备研究者的瞩目。然而,锂硫电池绝缘的活性物质与循环过程中不可避免的穿梭效应导致其反应动力学缓慢,进而造成包括循环倍率能力较差与库伦效率低下在内的诸多问题。研究人员现已发现了具有良好电导率且对多硫化物(LiPSs)具有吸附转化双重能力的过渡金属磷化物(TMPs)。本文将重点介绍运用在锂硫电池正极的不同过渡金属磷化物材料的设计合成方法与电化学性能提升研究相关进展,并对该类材料的未来发展进行展望。 展开更多
关键词 电池 过渡金属磷化物 硫载体 正极材料
下载PDF
有机粘土合成的介孔材料 被引量:2
10
作者 任杰 廖文俊 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2005年第1期1-5,共5页
有机粘土合成的介孔材料(MSCs)是用有机物或聚合物有机改性的粘土凝胶经过水热结晶,使得插层的粘土片层随机分散在聚合物基体中,然后焙烧脱去有机模板而制得。介孔半径的大小与聚合物质量百分含量及分子量大小有关。该类介孔材料可应用... 有机粘土合成的介孔材料(MSCs)是用有机物或聚合物有机改性的粘土凝胶经过水热结晶,使得插层的粘土片层随机分散在聚合物基体中,然后焙烧脱去有机模板而制得。介孔半径的大小与聚合物质量百分含量及分子量大小有关。该类介孔材料可应用于加氢脱硫催化剂载体、分子的选择吸收、聚合物基纳米复合材料等领域。本文介绍了MSCs的制备方法及应用。 展开更多
关键词 有机粘土 介孔材料 有机模板 加氢脱催化剂载体 纳米复合材料
下载PDF
Cloning and Expression Analysis of PtFATB Gene Encoding the Acyl-acyl Carrier Protein Thioesterase in Populus tomentosa Carr 被引量:1
11
作者 周洲 张德强 卢孟柱 《Journal of Genetics and Genomics》 SCIE CAS CSCD 北大核心 2007年第3期267-274,共8页
Acyl-ACP thioesterases (FATs) terminates the fatty acid synthesis and allow the transport of fatty acids out of the plastids, which are the important determinants of cellular metabolism. FATB is a member of FAT enzy... Acyl-ACP thioesterases (FATs) terminates the fatty acid synthesis and allow the transport of fatty acids out of the plastids, which are the important determinants of cellular metabolism. FATB is a member of FAT enzymes that has been described previously in most of the plants. In silico cloning is a new method that utilizes the bioinformatics on the complete genome and available EST database. In this study, a full-length cDNA clone of PtFATB gene was isolated from Populus tomentosa using this approach. It is 1,450 bp in length and the open reading frame encodes a peptide of 421 amino acids. The predicted amino acid sequence shows significant homology with those from other plant species, which contain typical domains owned by FATB proteins. The transcripts of PtFATB were abundant in leaves, and less in roots detected by using semiquantitative RT-PCR. When the shoots were subjected to the stress treatments (cold, dry, NaC1) and ABA (Abscisic acid), the expression of PtFATB was only slightly reduced under the treatment of low temperature. This suggests that the expression of PtFATB is in a constitutive fashion. This study provides the basis not only for the identification and characterization of this gene but also for the improvement of cold tolerance by controlling the expression of the PtFATB gene in trees in near future. 展开更多
关键词 Populus tomentosa Carr. Acyl-acyl carrier protein thioesterase (PtFATB) in silico and molecular cloning RT-PCR expression analysis
下载PDF
Secreted Expression of S-adenosy-L-methionine Synthetase in Pichia pastoris 被引量:6
12
作者 王莲哲 张现青 +2 位作者 李洋 杨广笑 何光源 《Agricultural Science & Technology》 CAS 2009年第2期49-53,共5页
[Objective] The research aimed to study the secreted expression of S-edenosyl-L-methionine synthetase (SAMS) in Pichia pastoris. Method ] The gene coding SAMS, from the genomic DNA of Saccharomyces cerevisiae, was ... [Objective] The research aimed to study the secreted expression of S-edenosyl-L-methionine synthetase (SAMS) in Pichia pastoris. Method ] The gene coding SAMS, from the genomic DNA of Saccharomyces cerevisiae, was amplified by PCR and inserted into the secreted expression vector pPIC9K to get recombinant plasmid. The recombinant plasmid pPIC9K-sarr~ was integrated into Pichia pastoris GSl15 genome by electroporation and induced by methanol. The activity of the recombinant enzyme was measured using high-pedormance liquid chroma- tography (HPLC) by determining the production of S-adenosy-L-methionine (SAM) with the enzyme secreted. [ ResultJ The molecular weight of the expression protein identified by SDS-PAGE was about 50 kD, being larger than the theoretical molecular mass of SAMS, which might be due to the glycosytation in the process of secretion. Methanol-induction as well as preliminary purification could enhance the enzyme activity, espe- cially the latter, after which the specific activity of SAMS was improved to 61.48 U/rng. [Conclusion] SAMS with biological activity was secreted successfully in Pichia pastoris GSl15 for the first time. And it is the start for the genetic engineering strains to open up prospects for industrial production. 展开更多
关键词 SAM Pichia pastoris pPICgK Secreted expression
下载PDF
高氮馏分油加氢精制催化剂的研制 被引量:4
13
作者 石芳 杨建国 +5 位作者 刘红光 张国辉 于海斌 李佳 赵训志 张玉婷 《精细石油化工》 CAS CSCD 北大核心 2011年第6期44-48,共5页
以含SiO2和/或TiO2的γ-Al2O3为复合载体、以W-Mo-Ni为活性金属组分,采用分步等体积浸渍法制备了一系列三叶草形加氢精制催化剂。采用X荧光射线、N2吸附比表面积、X射线衍射、扫描电镜等对催化剂结构进行了表征。在反应压力8.0MPa、反... 以含SiO2和/或TiO2的γ-Al2O3为复合载体、以W-Mo-Ni为活性金属组分,采用分步等体积浸渍法制备了一系列三叶草形加氢精制催化剂。采用X荧光射线、N2吸附比表面积、X射线衍射、扫描电镜等对催化剂结构进行了表征。在反应压力8.0MPa、反应温度340℃、氢油体积比600∶1、体积空速1.5h-1条件下,测定了催化剂的机械强度和表面酸性,采用100mL固定床加氢反应装置进行了催化剂性能评价。结果表明,所研制的催化剂对高氮劣质馏分油具有优异的加氢脱硫、脱氮及烯烃饱和性能,其中催化剂W-Mo-Ni/SiO2-TiO2-Al2O3的脱硫率可达到98%,脱氮率可达到97%和烯烃饱和率98%。 展开更多
关键词 脱氮加氢催化剂复合氧化物载体
下载PDF
防焦剂在三元乙丙橡胶中的应用
14
作者 陈巧娜 张鹏 石楠 《橡胶科技》 2018年第4期40-42,共3页
研究不同防焦剂对采用硫黄硫化体系、硫载体硫化体系和过氧化物硫化体系的三元乙丙橡胶(EPDM)的焦烧性能和物理性能的影响。结果表明:防焦剂E/C,CTP,E-80和DZ-01有效成分用量为0.5份时,对采用3种硫化体系的EPDM焦烧均起到延迟作用,防焦... 研究不同防焦剂对采用硫黄硫化体系、硫载体硫化体系和过氧化物硫化体系的三元乙丙橡胶(EPDM)的焦烧性能和物理性能的影响。结果表明:防焦剂E/C,CTP,E-80和DZ-01有效成分用量为0.5份时,对采用3种硫化体系的EPDM焦烧均起到延迟作用,防焦剂E/C的防焦效果最显著;添加防焦剂E/C的EPDM尤其是采用硫黄硫化体系的EPDM综合性能较好;随着防焦剂E/C用量的增大,采用硫黄硫化体系的EPDM焦烧时间和正硫化时间延长,拉伸性能先改善后变差,抗压缩永久变形性能改善。 展开更多
关键词 防焦剂 三元乙丙橡胶 焦烧时间 化体系 硫载体化体系 过氧化物化体系
下载PDF
Support Effects on Thiophene Hydrodesulfurization over Co-Mo-Ni/Al_2O_3 and Co-Mo-Ni/TiO_2-Al_2O_3 Catalysts 被引量:7
15
作者 刘超 周志明 +2 位作者 黄永利 程振民 袁渭康 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2014年第4期383-391,共9页
A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization (in moderate conditions:200 &#176;C, 12 h) of red liquor solids, a by-product of paper-making process. The prepared sulfonate... A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization (in moderate conditions:200 &#176;C, 12 h) of red liquor solids, a by-product of paper-making process. The prepared sulfonated cata-lyst (SC) had aromatic structure, composed of carbon enriched inner core, and oxygen-containing (SO3H, COOH, OH) groups enriched surface. The SO3H, COOH, OH groups amounted to 0.74 mmol·g^-1, 0.78 mmol·g^-1, 2.18 mmol·g^-1, respectively. The fresh SC showed much higher catalytic activity than that of the traditional solid acid catalysts (strong-acid 732 cation exchange resin, hydrogen type zeolite socony mobile-five (HZSM-5), sulfated zir-conia) in esterification of oleic acid. SC was deactivated during the reactions, through the mechanisms of leaching of sulfonated species and formation of sulfonate esters. Two regeneration methods were developed, and the catalytic activity can be mostly regenerated by regeneration Method 1 and be fully regenerated by regeneration Method 2, respectively. 展开更多
关键词 HYDRODESULFURIZATION SUPPORT hierarchically macro-/mesoporous structure AL2O3 TiO2-Al2O3
下载PDF
Hydrogenation of Commercial Polystyrene over Pd/BaSO_4 Catalysts: Effect of Carrier Structure 被引量:5
16
作者 韩凯悦 孟晨 +1 位作者 朱振伟 曹贵平 《Transactions of Tianjin University》 EI CAS 2014年第4期282-291,共10页
A variety of barium sulfate(BaSO4) carriers with or without mesopore structure were synthesized via precipitation reaction in aqueous solution of barium hydroxide and sulfuric acid with ethylene glycol as a modifying ... A variety of barium sulfate(BaSO4) carriers with or without mesopore structure were synthesized via precipitation reaction in aqueous solution of barium hydroxide and sulfuric acid with ethylene glycol as a modifying agent, and then calcined at various temperatures. The obtained BaSO4 was used as catalyst carriers for polystyrene(PS) hydrogenation, and BaSO4 supported palladium(Pd) catalysts with Pd content of 5wt% were prepared by using impregnation method. N2 physisorption, transmission electron microscopy, X-ray diffraction and kinetics studies were used to investigate the effect of carrier structure on the dispersion and geometric location of active metal and their catalytic activities in PS hydrogenation. It was found that the pore structure of carrier played an important role in the dispersion and location of Pd grains. The activation energy values for all the Pd/BaSO4 catalysts were around 49.1kJ/mol, while the pre-exponential factor for Pd/BSC-6H was much higher than others. The Pd/BSC-6H without mesopores had Pd grains deposited on the external surface of the carrier, and exhibited better activity than the mesoporous catalysts. It is indicated that the utilization of Pd/BSC-6H can reduce the pore diffusion of PS coils and enabled more active sites to participate in the PS hydrogenation. 展开更多
关键词 polystyrene hydrogenation carrier structure supported catalyst
下载PDF
Improving anti-sulfur performance of methane sensors by new vectors and active components
17
作者 WANG Ying, TONG Minming, ZHANG Tao School of Information and Electrical Engineering, China University of Mining & Technology, Xuzhou 221008, China 《Mining Science and Technology》 EI CAS 2010年第6期913-916,共4页
Conventional Pd/γ-A12O3 methane sensors are easily poisoned in a sulfur-containing atmosphere, with a subsequent decrease in sensitivity and the working life of methane sensors. We mainly investigated the effect of n... Conventional Pd/γ-A12O3 methane sensors are easily poisoned in a sulfur-containing atmosphere, with a subsequent decrease in sensitivity and the working life of methane sensors. We mainly investigated the effect of nanotechnology and a cerium co-catalyst on the stability and anti-sulfur performance of methane sensors. In our experiment, an anti-sulfur methane sensor was prepared by immersing cerium-containing γ-alumina nanometer elements into a Pt-Pd bimetallic nanometer catalyst. The experi- ment about the sensitivity and stability performance of different catalytic methane sensors indicate that sensitivity, decreased by catalyst sulfur poisoning, is improved significantly by adding cerium to the vector. As well, the long-term operational stability of methane sensors increased significantly. 展开更多
关键词 CERIUM anti-sulfur STABILITY sensitivity
下载PDF
A novel GSH responsive poly(alpha-lipoic acid)nanocarrier bonding with the honokiol-DMXAA conjugate for combination therapy 被引量:2
18
作者 Zhilin Liu Zhaohui Tang +4 位作者 Dawei Zhang Jiatan Wu Xinghui Si Na Shen Xuesi Chen 《Science China Materials》 SCIE EI CSCD 2020年第2期307-315,共9页
The key to improve the therapeutic efficacy for cancer treatment is to increase the delivery of drugs to tumors.For this purpose, tumor-microenvironment stimuliresponsive materials have great potential. Here, we prepa... The key to improve the therapeutic efficacy for cancer treatment is to increase the delivery of drugs to tumors.For this purpose, tumor-microenvironment stimuliresponsive materials have great potential. Here, we prepared a new nanomedicine by bonding the conjugate of honokiol(HNK) and 5,6-dimethylxanthenone-4-acetic acid(DMXAA)to a glutathione(GSH)-responsive nanocarrier, poly(α-lipoic acid) polyethylene glycol. The nanomedicine would disintegrate due to the high level of GSH at the tumor sites,achieving the co-delivery of HNK and DMXAA, and realizing the combination therapy through close-range killing by HNK and long-range striking by DMXAA together. In a murine 4T1 breast tumor model, this strategy exhibited high tumor inhibition rate of 93%, and provided a valuable therapeutic choice for cancer therapy. 展开更多
关键词 glutathione response CONJUGATE co-delivery and antitumor
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部