对高校学生管理硬性化理念的反驳与纠正

高校学生管理硬性化理念对高校学生管理而言具有不容小觑的重要作用。高校学生管理硬性化理念具有深厚的思想文化渊源,奠定其形成的根基与发展的可能。随着高校学生管理的日益发展,高校学生管理硬性化的弊端日益突显。高校学生管理应寻求将硬性化理念与柔性化理念、人性化理念、德性化理念以及智性化理念结合的路径,为高校学生管理持续发展提供优质的平台环境。

人力资源管理柔性化探讨

人力资源管理是每个公司重要环节,人力资源部也是公司的重要部门。人力资源管理不只是关于人才管理,还有人才的挑选、培训等等一整套的流程。针对公司人力资源管理,不同管理者管理手段不同,选择柔性化的管理还是硬性化管理?这两种管理手段有利有弊,柔性化的管理过于温和,硬性化的管理过于强硬,效的人力资源管理可以实现组织最优化,高效率完成目标,组织目标的实现与人力资源的有效管理是紧密相连的。本文针对人力资源管理柔性化进行讨论,深入了解柔性化管理制度,并阐述柔性化优缺点,针对缺点有效的改进。

Immunologic pathogenesis of multiple sclerosis

Multiple sclerosis （MS） is an autoimmune disease. The etiology and pathogenesis of MS remain unclear. At present, there are substantial evidences to support the hypothesis that genetics plays a crucial role. The people who have genetic predisposing genes easily develop immune-mediated disorder, probably in conjunction with environmental factors. The aim of this review is to describe recent observations regarding the immunologic pathogenesis of MS.

Effects of high temperature pre-straining on natural aging and bake hardening response of Al-Mg-Si alloys

The influences of high temperature pre-straining (HT-PS) on the natural aging and bake hardening of Al?Mg?Si alloys were investigated by Vickers microhardness measurements, differential scanning calorimetry (DSC) analysis and transmission electron microscopy (TEM) characterization. The results show that pre-straining at 170 °C immediately after quenching can effectively resolve the rather high T4 temper hardness caused by the conventional room temperature (RT) pre-straining treatment, and give a better bake hardening response (BHR) after paint-bake cycle. HT-PS 7% at 170 °C for 10 min is chosen as the optimum process as it provides lower T4 temper hardness and better BHR. The simultaneous introduction of dislocations and Cluster (2) can significantly suppress the natural aging and promote the precipitation of β″ phase, and reduce the effects of deformation hardening by dynamic recovery.

Experiments and modeling of double-peak precipitation hardening and strengthening mechanisms in Al-Zn-Mg alloy

The aim of the present work is to develop a model for simulating double-peak precipitation hardening kinetics in Al-Zn-Mg alloy with the simultaneous formation of different types of precipitates at elevated temperatures based on the modified Langer-Schwartz approach. The double aging peaks are present in the long time age-hardening curves of Al-Zn-Mg alloys. The physically-based model, while taking explicitly into account nucleation, growth, coarsening of the new phase precipitations and two strengthening mechanisms associated with particle-dislocation interaction （shearing and bypassing）, was used for the analysis of precipitates evolution and precipitation hardening during aging of Al-Zn-Mg alloy. Model predictions were compared with the measurements of Al-Zn-Mg alloy. The systematic and quantitative results show that the predicted hardness profiles of double peaks via adding a shape dependent parameter in the growth equation for growth and coarsening generally agree well with the measured ones. Two strengthening mechanisms associated with particle-dislocation interaction （shearing and bypassing） were considered operating simultaneously in view of the particle size-distribution. The transition from shearing to bypassing strengthening mechanism was found to occur at rather early stage of the particle growth. The bypassing was found to be the prevailing strengthening mechanism in the investigated alloys.

Analysis of bulging process of aluminum alloy by overlapping sheet metal and its formability

The influences of strength coefficient K, work hardening exponent n and thickness t of the overlapping sheet on bulging process are analyzed based on hardening material model. Also, bulging experiments are carried out by taking the aluminum alloy LF21 as formed sheet metal, and selecting overlapping sheet with different thicknesses and material properties, by which accuracy of the above analysis result is verified in the aspects of geometric shape, thickness distribution and limit bulging height. The results show that higher strength coefficient K, larger work hardening exponent n and proper thickness of the overlapping sheet are helpful to improve the formability and forming uniformity of formed sheet metal.

Anisotropic and temperature-dependent growth mechanism of S-phase precipitates in Al-Cu-Mg alloy in relation with GPB zones

By employing atomic-resolution imaging and first principles energy calculations, the growth behavior of S-phase precipitates in a high strength A1-Cu-Mg alloy was investigated. It is demonstrated that the nucleation and growth of the S-phase precipitate are rather anisotropic and temperature-dependent companying with low dimensional phase transformation. There are actually two types of Guinier-Preston （GP） zones that determine the formation mechanism of S-phase at high aging temperatures higher than 180 ℃. One is the precursors of the S-phase itself, the other is the structural units or the precursors of the well-known Guinier-Preston-Bagaryatsky （GPB） zones. At high temperatures the later GPB zone units may form around S-phase precipitate and cease its growth in the width direction, leading to the formation of rod-like S-phase crystals; whereas at low temperatures the S-phase precipitates develop without the interference with GPB zones, resulting in S-phase orecioitates with lath-like momhology.

Mechanical properties of Mg-6Gd-1Y-0.5Zr alloy processed by low temperature thermo-mechanical treatment

An as-solution treated Mg-6Gd-1Y-0.4Zr alloy was processed by low temperature thermo-mechanical treatments （LT-TMT）, including cold tension with various strains followed by aging at 200 °C to peak hardness. The results show that the precipitation kinetics of the alloy experienced LT-TMT is greatly accelerated and the aging time to peak hardness is greatly decreased with increasing tensile strain. The tensile yield strength, ultimate tensile strength and elongation at room temperature of the alloy after cold tension with strain of 10% and peak aging at 200 °C are 251 MPa, 296 MPa and 8%, respectively, which are superior to the commercial heat-resistant WE54 alloy, although the latter has a higher rare earth element content.

Influence of pre-deformation on age-hardening response and mechanical properties of extruded Mg-6%Zn-1%Mn alloy

The effect of cold plastic deformation between solution treatment and artificial aging on the age-hardening response and mechanical properties of alloy was investigated by micro-hardness test,tensile test,optical microscopy（OM） and TEM observation.After solution treatment at 420 ℃ for 1 h,three kinds of pre-deformation strains,i.e.0,5% and 10%,were applied to extruded ZM61 bars.Age-hardening curves show that pre-deformation can significantly accelerate the precipitation kinetics and increase peak-hardness value;however,as pre-deformation strain rises from 5% to 10%,there is no gain in peak hardness value.The room temperature（RT） tensile properties demonstrate that increasing the pre-deformation degree can enhance the yield strength（YS） and ultimate tensile strength（UTS） but moderately reduce elongation（EL）;furthermore,the enhancement of YS is larger than that of UTS.No twin can be observed in 5% pre-deformed microstructure;however,a large number of twins are activated after 10% pre-deformation.The peak-aged TEM microstructure shows that pre-deformation can increase the number density of rod-shaped β 1 ＇ precipitates which play a key role in strengthening ZM61 alloy.

Analysis of plane strain bending of a strain hardening curved beam based on unified yield criterion

The analysis of plane strain elastic-plastic bending of a linear strain hardening curved beam with a narrow rectangular cross section subjected to couples at its end is conducted based on a unified yield criterion. The solutions for the mechanical properties of plane strain bending are derived, which are adapted for various kinds of non-strength differential materials and can be degenerated to those based on the Tresca, von Mises, and twin-shear yield criteria. The dependences of the two critical bending moments, the radii of the interfaces between the elastic and plastic regions and the radial displacements of the points at the symmetrical plane on different yield criteria and Poisson’s ratios are discussed. The results show that the influences of different yield criteria and Poisson’s ratio on the two critical bending moments, the radii of the interfaces between the elastic and plastic regions and the radial displacements of the points at the symmetrical plane of the curved beam are significant. Once the value of bis obtained by experiments, the yield criterion and the corresponding solution for the materials of interest are then determined.

Construction and solution of strain model along thickness of aluminum alloy plate under plastic deformation

A thickness strain model of aluminium alloy plate under plastic deformation,based on thin plate assumption was proposed.It is found that when ratio of stress fractions is constant during in-plane loading,ratios of strain components under various loading conditions are linearly related and these points of ratios form a η-η line.Under these simple loadings,strains in thickness direction can be easily calculated by the η-η line equation without integral and differential work.When the plate is under more complicated loading conditions,the thickness can be computed by the proposed optimization and piecewise calculation model.Validation computations indicate that the relative error of the results of the presented model is less than 0.75% compared with the proven theories and FE simulation.Therefore,the developed model can be applied to engineering calculation,e.g.pre-stretching analysis of aerospace aluminium thick plate,with acceptable accuracy.

Plasma electrolytic oxidation of zircaloy-4 alloy with DC regime and properties of coatings

The plasma electrolytic oxidation（PEO） coatings on zircaloy？4 alloy were prepared in silicate,phosphate and pyrophosphate electrolyte systems or their combination by DC current regime.The proper processing parameters were determined and the coatings were evaluated by electrochemistry technique,micro-hardness,SEM and XRD.The results show that the coating prepared in pure silicate system is uneven and after the addition of phosphate solution,the homogeneity of the coating is still poor.The coating prepared in pure pyrophosphate electrolyte system is homogeneous,but its hardness value is low.After the addition of silicate into the pyrophosphate electrolytic system,both the uniformity and hardness of the coating are improved.The XRD results show that the phase compositions are m-ZrO2 and t-ZrO2,the addition of silicate is beneficial to the formation of t-ZrO2.The results of polarization curves show that the coatings prepared in pyrophosphate and the mixture of pyrophosphate and silicate have better corrosion resistance.

Microstructure and properties of alloying coating on AZ31B magnesium alloy

Vacuum thermal diffusion technique was applied to preparing alloying coating on AZ31 B magnesium alloy. The microstructure and phase composition of the coatings prepared at different holding time were investigated in detail using optical microscopy（OM）, scanning electron microscopy（SEM）, energy dispersive spectrometer（EDS） and X-ray diffraction（XRD）, and so on. The microhardness tester and electrochemical workstation（PS-168a） were used to measure the microhardness and corrosion resistance of the alloying coating. The results showed that the alloying coatings gradually generated with the extension of holding time under constant temperature. And the obvious bonding interface between the coating and substrate was observed, and the bonding interface was changed from smooth to zigzag. EDS and XRD analyses showed that the microstructure of alloying coating mainly consisted of eutectic α-Mg phase and continuous network β-Al（12）Mg（17） phase. The average microhardness of the coatings increased by 113% in comparison to the substrate, and the self-corrosion potential increased from-1.389 to-1.268 V at the same time.

A GENERAL PROCEDURE TO CAPTURE THE "DYNAMIC STIFFNESS

A general procedure to capture the 'dynanmic Stiffness' is presented in this paper. The governing equations of motion are formulated for an arbitrary flexible body in large overall motion based on Kane's equations . The linearization is performed peroperly by means of geometrically nonlinear straindisplacement relations and the nonlinear expression of angular velocity so that the 'dynamical stiffness' terms can be captured naturally in a general tcase. The concept and formulations of partial velocity and angular velocity arrays of Huston's method are extended to the flexible body and form the basis of the analysis. The validity and generality of the procedure presented in the paper are verified by numerical results of its application in both the beam and plate models.

Time-temperature-property curves for quench sensitivity of 6063 aluminum alloy

The quench sensitivity of 6063 alloy was investigated via constructing time-temperature-property（TTP） curves by interrupted quenching technique and transmission electron microscopy（TEM） analysis.The results show that the quench sensitivity of 6063 alloy is lower than that of 6061 or 6082 alloy,and the critical temperature ranges from 300 to 410℃ with the nose temperature of about 360℃.From TEM analysis,heterogeneous precipitate β-Mg2Si is prior to nucleate on the（AlxFeySiz） dispersoids in the critical temperature range,and grows up most rapidly at the nose temperature of 360℃.The heterogeneous precipitation leads to a low concentration of solute,which consequently reduces the amount of the strengthening phase β＇＇ after aging.In the large-scale industrial production of 6063 alloy,the cooling rate during quenching should be enhanced as high as possible in the quenching sensitive temperature range（410-300℃） to suppress the heterogeneous precipitation to get optimal mechanical properties,and it should be slowed down properly from the solution temperature to 410℃ and below 300℃ to reduce the residual stress.

Influence of sequence of cold working and aging treatment on mechanical behaviour of 6061 aluminum alloy

The influence of combination of different designated precipitation hardening and cold working on the tensile properties of 6061 aluminum alloy was investigated. The results indicate that applying single aging at 180 ℃ for 4 h in different thermal-mechanical treatments improves both the strength and elongation. However, double aging does not improve the mechanical properties. In addition, pre-aging shows a negative effect on the subsequent precipitation hardening of material. The changes in mechanical properties were discussed by explanation of microstructural evolution due to the competition of precipitation hardening, strain hardening and work softening processes.

Primary sclerosing cholangitis: Updates in diagnosis and therapy

Primary sclerosing cholangitis (PSC) is a chronic cholestatic syndrome of unknown origin mostly found in males, and characterized by diffuse inflammation and fibrosis of both intra- and extra-hepatic bile ducts. So far, PSC is considered as an autoimmune hepatobiliary disease. In most cases the progression of PSC towards liver cirrhosis and liver failure is slow but irreversible, and liver transplantation is currently the only definitive treatment. In recent years,PSC has been an area of active research worldwide with great interest in etiology, pathogenesis, diagnosis, and therapeutic options such as hydrophilic ursodeoxycholic acid and immunosuppressive agent tacrolimus. Recent updates on clinical and therapeutic aspects of PSC are discussed in the present review.

Primary sclerosing cholangitis, autoimmune hepatitis and overlap syndromes in inflammatory bowel disease

Primary sclerosing cholangitis （PSC） is a chronic progressive disorder of unknown aetiology characterised by chronic inflammation and stricture formation of the biliary tree. Symptoms include itch and lethargy and in advanced cases cholangitis and end-stage liver disease, however increasing numbers of asymptomatic individuals are being identified. The disease is rare in the general population but is strongly associated with inflammatory bowel disease （IBD） affecting up to 5% of patients with Ulcerative Colitis, with a slightly lower prevalence （up to 3.6%） in Crohns disease. The strength of this association means that the vast majority （ 〉 90%） of patients with PSC also have IBD, although many may have only mild gastro-intestinal symptoms. Usually IBD presents before PSC, although vice-versa can occur and the onset of both conditions can be separated in some cases by many years. Mean age of diagnosis of PSC is in the fitch decade of life with a strong male predominance. Risk is increased in those with a family history of PSC, suggesting a genetic predisposition and the disease is almost exclusive to non-smokers. The ulcerative colitis associated with PSC is characteristically mild, runs a quiescent course, is associated with rectal sparing, more severe right sided disease, backwash ilieitis and has a high risk of pouchitis post-colectomy. Most worrisome is the high risk of colorectal malignancy which necessitates routine colonoscopic surveillance. Cholangiocarcinoma is also a frequent complication of PSC with a 10%-15% lifetime risk of developing this condition. Treatment with high dose ursodeoxycholic acid offers some chemoprotective effects against colorectal malignancy and may decrease symptoms, biochemical and histological progression of liver disease. Small duct PSC patients characteristically have normal cholangiography, and liver biopsy is required for diagnosis, it appears to have a more favourable prognosis. Autoimmune Hepatitis （AIH） is also more prevalent in patients with IBD, with up to 16% of patients with Autoimmune Hepatitis also having ulcerative colitis. A small subgroup of patients have a AIH-PSC overlap syndrome and the management of these patients depends on liver histology, serum IgM levels, autoantibodies, degree of biochemical cholestasis and cholangiography as some of these patients may respond to immunosupression.

Idiopathic sclerosing encapsulating peritonitis (or abdominal cocoon):A report of 5 cases

Sclerosing encapsulating peritonitis (SEP) is a rare cause of intestinal obstruction that is characterized by a thick grayish-white fibrotic membrane encasing the small bowel. SEP can be classified as idiopathic,also known as abdominal cocoon,or secondary. It is difficult to make a definite pre-operative diagnosis. We experienced five cases of abdominal cocoon,and the case files were reviewed retrospectively for the clinical presentation,operative findings and outcome. All the patients presented with acute,subacute and chronic intestinal obstruction. Computed tomography (CT) showed characteristic findings of small bowel loops congregated to the center of the abdomen encased by a soft-tissue density mantle in four cases. Four cases had an uneventful post-operative period,one case received second adhesiolysis due to persistent ileus. The imaging techniques may facilitate pre-operative diagnosis. Surgery is important in the management of SEP.

Prevalence of metabolic syndrome, obesity and diabetes type 2 in cryptogenic cirrhosis

AIM: To evaluate the prevalence of metabolic syndrome (MS), obesity and type 2 diabetes mellitus (T2DM) in a group of Mexican Mestizo patients with cryptogenic cirrhosis (CC) and to compare this group with patients with cirrhosis secondary to other causes (disease controls). METHODS: Patients with CC, diagnosed between January, 1990 and April, 2005, were included in a retrospective study. Patients with cirrhosis caused by chronic hepatitis C, alcohol abuse or autoimmune hepatitis (AIH) served as disease controls. RESULTS: A total of 134 patients with CC were analyzed. Disease controls consisted of 81 patients with chronic hepatitis C, 33 with alcohol abuse and 20 with AIH. The median age of patients with CC was 57 years (range, 16-87); 83 (61.9%) patients were female; 53 (39.6%) were Child A, 65 (48.5%) Child B, and 16 (11.9%) were Child C cirrhosis. The prevalence of MS (29.1% vs 6%; P < 0.001), obesity (16.4% vs 8.2%; P = 0.04) and T2DM (40% vs 22.4%; P = 0.013) was higher in CC patients than in disease controls. There were no differences in sex, age or liver function tests between the two groups. CONCLUSION: The prevalence of MS, obesityand T2DM were higher in patients with CC than in patients with cirrhosis secondary to others causes. Our findings support the hypothesis that non-alcoholic steatohepatitis (NASH) plays an under-recognized role in CC.