The thrust and the torque of various carbide drills are studied for the high-speed drilling of fiber reinforced epoxy composites. The orthogonal experiment is carried out with different feed speeds at high rotation sp...The thrust and the torque of various carbide drills are studied for the high-speed drilling of fiber reinforced epoxy composites. The orthogonal experiment is carried out with different feed speeds at high rotation speed. Experimental results show that the spindle rotation speed is the most influential factor. The thrust andthe torque decrease under the condition of high rotation rate. With the decrease of the feed speed, the thrust and the torque decrease. But the effect of the feed speed is less than that of the spindle rotation rate. Moreover, the effect of drill materials on the thrust and the torque is more notable than that of the drill geometries and the feed speed. The thrust is greatly affected by the feed speed while the torque is obviously affected by drill geometries.展开更多
In machining the particle reinforced aluminum based composite material with high Si content using the cobalt-cemented tungsten carbide micro cutting tools, diamond like carbon （DLC） films are deposited on cobalt-cem...In machining the particle reinforced aluminum based composite material with high Si content using the cobalt-cemented tungsten carbide micro cutting tools, diamond like carbon （DLC） films are deposited on cobalt-cemented tungsten carbide micro-drills with two-step pretreatment method. Characteristics of DLC coated tools are investigated in bias-enhanced HFCVD system with the optimized hot filament arrangement. The optimization deposition technology is obtained and the wear mechanism of cutting tools is analyzed. The drilling performance of DLC coated tools is verified by the experiments of cutting particle reinforced aluminum based composite material （Si 15% in volume） compared with uncoated ones. Experimental results show that the two-step pretreatment method is appropriate for complex shaped cemented carbide substrates and ensures the good adhesive strength between the diamond film and the substrate. The cutting performance of DLC coated tool is enhanced 10 times when machining the Si particle reinforced aluminum based metal matrix composite compared with that of uncoated ones under the same cutting conditions.展开更多
Aim To research on a solid cemented carbide multi facet drill for drilling high strength steel. Methods Assimilating some features of multi facet drill edge structures, through systematic drilling experiments, a n...Aim To research on a solid cemented carbide multi facet drill for drilling high strength steel. Methods Assimilating some features of multi facet drill edge structures, through systematic drilling experiments, a new type of solid cemented carbide drill was developed and the drill geometry was optimized. Results With the new type drill,the drilling force decreases by 10%-20%, the drilling productivity (drilled holes per hour) increases by 2-3 times, and the drilling precision and surface finish increase by one level. Conclusion The new type drill possesses excellent drilling performance.展开更多
The lifetime of roll-bits with inserted tooth will be obviously decreased while drilling in strata and the tungsten carbide can be integrally separated from the roll-cone,which will need more trip out time to replace ...The lifetime of roll-bits with inserted tooth will be obviously decreased while drilling in strata and the tungsten carbide can be integrally separated from the roll-cone,which will need more trip out time to replace the roller bit.This study provides an entire analysis on stress as well as strength for teeth and tooth holes in loaded conditions.Qualities of tooth drop from matrix within roller bit.The optimized interferences of teeth inserted into the bit can be reasonably obtained by the critical interference derived from some relevant influence factors on the tooth-fixing quality of roller bits.展开更多
The development of a high-performance cemented carbide drill bit is of great significance to the reduction of rock drilling-cost. The non-smooth features of a biological surface provide an insight into how they can ob...The development of a high-performance cemented carbide drill bit is of great significance to the reduction of rock drilling-cost. The non-smooth features of a biological surface provide an insight into how they can obtain low friction and good wear resistance with evolving surface morphology. By analyzing the mechanism of the surface of a dung beetle for reducing soil wear and adherence, we design a cemented carbide drill bit with a bionic surface, which is expected to have superior anti-wearing and anti-sticking properties for drilling the soft coal seam. Inspired from the characteristics of the head and pronotum surface of the dung beetle, optimized non-smooth surface of the drill bit was constructed. The working performance of this innovative drill was experimentally tested. With comparative experiments under the identical drilling conditions, the wear rates, drilling times of conventional drills and bionic drills were measured. Compared with the conventional counterpart, the drill designed exhibits better performance in reducing wear and sticking drilling-breaks, therefore achieving higher levels of efficiency. The diameter of the dome and pit on the bit surface is in the range of 0.8–1.2 mm, and the bionic drill bits could get better performance with preferable drilling speeds and wear rates.展开更多
文摘The thrust and the torque of various carbide drills are studied for the high-speed drilling of fiber reinforced epoxy composites. The orthogonal experiment is carried out with different feed speeds at high rotation speed. Experimental results show that the spindle rotation speed is the most influential factor. The thrust andthe torque decrease under the condition of high rotation rate. With the decrease of the feed speed, the thrust and the torque decrease. But the effect of the feed speed is less than that of the spindle rotation rate. Moreover, the effect of drill materials on the thrust and the torque is more notable than that of the drill geometries and the feed speed. The thrust is greatly affected by the feed speed while the torque is obviously affected by drill geometries.
文摘In machining the particle reinforced aluminum based composite material with high Si content using the cobalt-cemented tungsten carbide micro cutting tools, diamond like carbon （DLC） films are deposited on cobalt-cemented tungsten carbide micro-drills with two-step pretreatment method. Characteristics of DLC coated tools are investigated in bias-enhanced HFCVD system with the optimized hot filament arrangement. The optimization deposition technology is obtained and the wear mechanism of cutting tools is analyzed. The drilling performance of DLC coated tools is verified by the experiments of cutting particle reinforced aluminum based composite material （Si 15% in volume） compared with uncoated ones. Experimental results show that the two-step pretreatment method is appropriate for complex shaped cemented carbide substrates and ensures the good adhesive strength between the diamond film and the substrate. The cutting performance of DLC coated tool is enhanced 10 times when machining the Si particle reinforced aluminum based metal matrix composite compared with that of uncoated ones under the same cutting conditions.
文摘Aim To research on a solid cemented carbide multi facet drill for drilling high strength steel. Methods Assimilating some features of multi facet drill edge structures, through systematic drilling experiments, a new type of solid cemented carbide drill was developed and the drill geometry was optimized. Results With the new type drill,the drilling force decreases by 10%-20%, the drilling productivity (drilled holes per hour) increases by 2-3 times, and the drilling precision and surface finish increase by one level. Conclusion The new type drill possesses excellent drilling performance.
文摘The lifetime of roll-bits with inserted tooth will be obviously decreased while drilling in strata and the tungsten carbide can be integrally separated from the roll-cone,which will need more trip out time to replace the roller bit.This study provides an entire analysis on stress as well as strength for teeth and tooth holes in loaded conditions.Qualities of tooth drop from matrix within roller bit.The optimized interferences of teeth inserted into the bit can be reasonably obtained by the critical interference derived from some relevant influence factors on the tooth-fixing quality of roller bits.
基金supported by the National Natural Science Foundation of China(Grant Nos.51204122&51134018)the Natural Science Foundation of Jiangsu Province(Grant No.BK20140411)+3 种基金State Key Laboratory of Mechanics and Control of Mechanical Structures(Nanjing University of Aeronautics and AstronauticsMCMS-0414Y01)the National Basic Research Program of China(“973”Project)(Grant No.2014CB239203)the 111 Project(Grant No.B14006)
文摘The development of a high-performance cemented carbide drill bit is of great significance to the reduction of rock drilling-cost. The non-smooth features of a biological surface provide an insight into how they can obtain low friction and good wear resistance with evolving surface morphology. By analyzing the mechanism of the surface of a dung beetle for reducing soil wear and adherence, we design a cemented carbide drill bit with a bionic surface, which is expected to have superior anti-wearing and anti-sticking properties for drilling the soft coal seam. Inspired from the characteristics of the head and pronotum surface of the dung beetle, optimized non-smooth surface of the drill bit was constructed. The working performance of this innovative drill was experimentally tested. With comparative experiments under the identical drilling conditions, the wear rates, drilling times of conventional drills and bionic drills were measured. Compared with the conventional counterpart, the drill designed exhibits better performance in reducing wear and sticking drilling-breaks, therefore achieving higher levels of efficiency. The diameter of the dome and pit on the bit surface is in the range of 0.8–1.2 mm, and the bionic drill bits could get better performance with preferable drilling speeds and wear rates.
