四驱不带轴间差速的驱动原理解析

文章对四驱车辆轴间无差速驱动原理进行了定性分析,给出了边界条件,展示出了空档滑行的试验验证结果,给业界同行在考虑是否需要设置差速器时,提供了思考问题的方向和借鉴。

Application and development of numerical simulation for under- ground horizontal directional drilling

In coalmines of China, horizontal directional drilling （HDD） is an increasingly popular method for underground in-seam gas drainage. Numerical simulation, especially finite element analysis, is often used as an effective method to improve HDD operation. These improvements focus on rock-breaking efficiency, directional precision, stability of the borehole wall, and reliability of the drill equipment. On the basis of underground drilling characteristics, typical numerical simulation exam- ples in drilling techniques and equipment are summarized and analyzed. In the end, the future development trends of numerical simulation in underground in-seam drilling are proposed.

Identification Method of Dynamic Coefficients of Fluid Film Bearings for HDD Spindle Motors

Fluid film bearings are widely used as support elements of rotating shaft for HDD （hard disk drive） spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increasing because the HDDs are used for various information related equipments such as mobile PCs, car navigation systems. Hence, the rotating shaft has a possibility to come in contact with the bearing and it causes wear or seizure to the bearing surface. In order to avoid the problems, it is extremely important to enhance the dynamic characteristics of the fluid film bearings for spindles. However, verification from both theory and experiment of dynamic characteristics such as spring coefficients and damping coefficients is rare and few. In this paper, the bearing vibration characteristics when the HDD spindle is oscillated are investigated theoretically and experimentally. And then the identification method ofoil film coefficients of fluid film bearing spindles is described.

A hybrid storage technology for low power consumption and high I/O performance in an IPTV set-top box

A new method of prefetching data blocks from the NVCache to the page cache in main memory and cascading prefetching n-blocks from a hard disk to the NVCache together was proposed to reduce the spin-up frequency of a hybrid hard disk drive and thus enhance I/O performance.The proposed method consists of three steps:1) Analyzing the pattern of read requests in block units;2) Determining the number of blocks prefetched to the NVCache;3) Replacing blocks in the NVCache according to the block replacement policy.The proposed method can reduce the latency time of a hybrid hard disk and optimize the power consumption of an IPTV set-top box.Experimental results show that the proposed method provides better average response time compared to an existing adaptive multistream prefetching(AMP) method by 25.17%.It also reduces by 20.83% the average power consumption over that of the existing external caching in energy saving storage system(EXCES) method.

Modal analysis and pulse response of mobile hard disk head actuator arm assembly

Head actuator arm assembly (HAA) is the most important mechanical component of a mobile hard disk drive (HDD) and its shock dynamic response is a principal index of vibration resistance. In this paper,a finite element (FE) model is firstly developed in ANSYS of 2.5 inch (1 inch=25.4 mm) mobile hard disk. This model includes actuator arm,voice coil motor (VCM) and pivot bearing. The various step modal of HAA is calculated by FE model. Then the actuator arm vibration behavior is simulated with LS-DYNA procedure. The influence of pulse waveform,pulse amplitude and pulse width on the shock response of the relative displacement of the head actuator arm assembly is studied.

An Overlay Network for Monitoring Activities of Computer Viruses

To accurately track computer viruses,an overlay network that monitors the activities of viruses is constructed.Identifying and locating nodes infected by virus on network is achieved by a naming system in which a node in the network is mapped to a unique serial number of the hard-drive.By carefully monitoring and recording sensitive communication between local system and remote nodes on the network,and suspicious operations on files that originate from remote nodes and entered via some form of file transfer,activities of viruses in both local and network level are recorded and ready for future analysis.These data can also be used in analysis of the mechanism of a computer virus as well as its spreading mode and pattern.

Design of Intersample Response in a Hard Disk Control System

The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardware specifications, but the hold interval of the control input is not constrained. In the present study, a multirate control system is designed, in which the sampling and the hold intervals are not equal. A multirate control law, which stabilizes a closed-loop system, is extended using newly introduced parameters such that the sample response of the plant output is maintained. Furthermore, intersample ripples in the steady state are eliminated using the new design parameters, which can be selected independently of the sample response. As a result, the intersample response can be improved independently of the sample response. The proposed method is applied to a benchmark problem of an HDD system, and its effectiveness is demonstrated.

Vibration Response Characteristics against the Radial and Axial Shocks on Small Size Hard Disk Drive Spindle Supported by Oil Film Bearings

This paper describes the experimental study on shock response of FDB （fluid dynamic bearing） spindle for HDDs （hard disk drives）. The FDBs are widely used as rotating shaft support elements for HDD spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increasing because the HDDs are used for various information related equipment such as mobile PCs （personal computers）, video cameras, car navigation systems and so on. Hence, the rotating shaft has a possibility to come in contact with the bearing by external shocks and it causes wear or seizure to the bearing surface. To avoid the problem, it is extremely important to know how the spindle moves against the large shock on HDDs experimentally. However, as far as the authors know, there are few experimental studies treating the shock response of HDD spindles. In this paper, firstly, we propose a new test rig and experimental method for shock response of FDB spindles. Then the shock tests against the radial and axial disturbance on FDB spindle for 2.5＂ HDD are conducted. Finally, the experimental results of shock response waveforms and maximum displacement of disk are shown.

The Effect of Pivot Bearing Assembly Process on Natural Frequency of Actuator Arm

This paper presents the study of vibration in each element of hard disk drive, especially the resonance of the actuator arm. The resonance occurs in hard disk drive is considered as one of the quality controlled parameter. The main purpose of the research is to investigate the relationship between the pivot bearing assembly process and the natural frequency of the actuator arm. The experiment is designed using the information from the hard disk drive manufacturer. The selected pivot bearing assembly process parameters have been controlled. The modal analysis of the assembled actuator arms has been done. The experiment results show the relationship of the specific process parameters and some of the actuator arm＇s modal frequency. The results also show that the affected vibration mode is the torsion mode only.

A review of hard carbon anodes for rechargeable sodium-ion batteries

Hard carbons(HCs)are recognized as potential anode materials for sodium-ion batteries(SIBs)because of their low cost,environmental friendliness,and the abundance of their precursors.The presence of graphitic domains,numerous pores,and disordered carbon layers in HCs plays a significant role in determining their sodium storage ability,but these structural features depend on the precursor used.The influence of functional groups,including heteroatoms and oxygen-containing groups,and the microstructure of the precursor on the physical and electrochemical properties of the HC produced are evaluated,and the effects of carbonization conditions(carbonization temperature,heating rate and atmosphere)are also discussed.

In situ electron holography of the dynamic magnetic field emanating from a hard-disk drive writer

The proliferation of mobile devices in society accessing data via the ＂cloud＂ is imposing a dramatic increase in the amount of information to be stored on hard disk drives （HDD） used in servers. Forecasts are that areal densities will need to increase by as much as 35% compound per annum and by 2,020 cloud storage capacity will be around 7 zettabytes corresponding to areal densities of 2 Tb/in^2. This requires increased performance from the magnetic pole of the electromag- netic writer in the read/write head in the HDD. Current state-of-art writing is undertaken by morphologically complex magnetic pole of sub 100 nm dimensions, in an environment of engineered magnetic shields and it needs to deliver strong directional magnetic field to areas on the recording media around 50 nm × 13 nm. This points to the need for a method to perform direct quantitative measurements of the magnetic field generated by the write pole at the nanometer scale. Here we report on the complete in situ quantitative mapping of the magnetic field generated by a functioning write pole in operation using electron holography. The results point the way towards a new nanoscale magnetic field source to further develop in situ transmission electron microscopy.

HARD DISK DRIVES CONTROL IN MOBILE APPLICATIONS

In this paper, control design is investigated for hard disk drives in mobile applications with unknown external arbitrarily fast time-varying disturbances. The disturbances can be estimated with exponential accuracy using the proposed disturbance observer based on a series of integral filters. The position error signal will converge to zero with the proposed control technique for systems subjected to the unknown disturbances. The effectiveness of the proposed method is demonstrated by extensive simulation studies.