The biofilm characteristics and enhanced performance of a marine microbial-electrolysis-cell-based biosensor under positive anodic potential

Microbial fuel cells have already been used as biosensors to monitor assimilable organic carbon(AOC).However,their signal production from AOC is known to be completely suppressed by dissoved oxygen(DO).In this study,two identical microbial electrolysis cell(MEC)based biosensors were inoculated with marine sediment and operated at two different anodic potentials,namely-300 mV and+250 mV relative to Ag/AgCl.The MEC biosensor operated under positive anodic potential conditions had electrochemically active microbial communities on the anode,including members of the Shewanellaceae,Pseudoalteromonadaceae,and Clostridiaceae families.However,the strictly anaerobic members of the Desulfuromonadaceae,Desulfobulbaceae and Desulfobacteraceae families were found only in the negative anodic potential MEC biosensor.The positive anodic potential MEC biosensor showed several other advantages as well,such as faster start-up,significantly higher maximum current production,fivefold improvement in the AOC detection limit,and tolerance of low dissolved oxygen,compared to those obtained from the negative anodic potential MEC biosensor.The developed positive anodic potential MEC biosensor can thus be used as a real-time and inexpensive detector of AOC concentrations in high saline and low DO seawater.

Microstructure and superhardness effect of VC/TiC superlattice films

Vanadium carbide/titanium carbide （VC/TiC） superlattice films were synthesized by magnetron sputtering method. The effects of modulation period on the microstructure evolution and mechanical properties were investigated by EDXA, XRD, HRTEM and nano-indentation. The results reveal that the VC/TiC superlattice films form an epitaxial structure when their modulation period is less than a critical value, accompanied with a remarkable increase in hardness. Further increasing the modulation period, the hardness of superlattices decreases slowly to the rule-of-mixture value due to the destruction of epitaxial structures. The XRD results reveal that three-directional strains are generated in superlattices when the epitaxial structure is formed, which may change the modulus of constituent layers. This may explain the remarkable hardness enhancement of VC/TiC superlattices.

Low Temperature Plasma CVD Grown Graphene by Microwave Surface-Wave Plasma CVD Using Camphor Precursor

Hydrocarbon precursor such as methane has been widely used to grow graphene films and the methods of growing quality graphene films are dominated by thermal CVD （chemical vapor deposition） system. Graphene films grown by plasma process are generally highly defective which in turns degrade the quality of the films. Here, using a green precursor, camphor we demonstrate a simple and economical method to get high-quality graphene film on copper substrate by micro wave surface-wave plasma CVD at relatively low temperature 550℃. Graphene film grown using camphor shows superior quality than that of the film grown using methane. Results revealed that camphor precursor is a good alternative to hydrocarbon precursors for graphene research.

Polymeric Membranes Used in Natural Gas Processing to Separate Carbon Dioxide： the Facing Problems and Solutions

For the last two decades polymeric membranes have been used in several gas separation processes. For the high selectivity and permeability various types of membranes have been developed. Thin layers to high dense and hollow fiber to asymmetric wounded materials to determine the effective separation of CO2 from CH4 were used. Ideal membrane materials must have provisions of durability, chemical and thermal resistance, effective separation and economical production and operation. In this review it is observed that most of the polymeric materials face plasticization problem in the separation of CO2 from CH4. This is due to the condensable nature of carbon dioxide that causes swelling in most of the polymeric membranes due to which the efficiency of selectivity and permeability is affected. Most extensive works have been carried out in developing the chemical structure and compositions of polymeric materials to improve the separation properties. Cross-linking and blending of molecular sieving called ＂mixed-matrix＂ are the most useful approaches applied in this regard, but no where it is found to be fully effective and ideal polymeric membranes commercially fit to replace the existing systems of CO2 separation from the natural gas. Still area is open to work on to produce more worth full materials and switch towards liquid membranes and hybrid systems.

Freestanding macroscopic metal-oxide nanotube films derived from carbon nanotube film templates

Aligned carbon nanotube films coated with amorphous carbon were developed into novel templates by atomic layer deposition. Freestanding macroscopic metal-oxide nanotube films were then successfully synthesized by using these templates. The reactive amorphous carbon layer greatly improved the nuclei density, which ensured the high quality of the films and allowed for precise control of the wall thickness of the nanotubes. Using template-synthesized alumina nanotube films, we demonstrate a humidity sensor with a high response speed, a transmission electron microscopy （TEM） grid, and a catalyst support. The cross- stacked assembly, ultrathin thickness, chemical inertness, and high thermal stability of the alumina nanotube films contributed to the excellent performance of these devices. In addition, it is expected that the metal-oxide nanotube films would have significant potential owing to their material richness, macroscopic appearance, flexibility, compatibility with the semiconducting technologies, and the feasibility of mass production.