For the first time, Pd supported on natural palygorskite was developed for amine formylation with CO2 and H2. Both secondary and primary amines with diverse structures could be converted into the desired formamides at...For the first time, Pd supported on natural palygorskite was developed for amine formylation with CO2 and H2. Both secondary and primary amines with diverse structures could be converted into the desired formamides at < 100 °C, and good to excellent yields were obtained.展开更多
Electrochemical CO2 reduction is a promising strategy for the utilization of CO2 and intermittent excess electricity.Cu is the only single metal catalyst that can electrochemically convert CO2 into multicarbon product...Electrochemical CO2 reduction is a promising strategy for the utilization of CO2 and intermittent excess electricity.Cu is the only single metal catalyst that can electrochemically convert CO2 into multicarbon products.However,Cu exhibits an unfavorable activity and selectivity for the generation of C2 products because of the insufficient amount of CO*provided for the C‐C coupling.Based on the strong CO2 adsorption and ultrafast reaction kinetics of CO*formation on Pd,an intimate CuPd(100)interface was designed to lower the intermediate reaction barriers and improve the efficiency of C2 product formation.Density functional theory(DFT)calculations showed that the CuPd(100)interface enhanced the CO2 adsorption and decreased the CO2*hydrogenation energy barrier,which was beneficial for the C‐C coupling.The potential‐determining step(PDS)barrier of CO2 to C2 products on the CuPd(100)interface was 0.61 eV,which was lower than that on Cu(100)(0.72 eV).Encouraged by the DFT calculation results,the CuPd(100)interface catalyst was prepared by a facile chemical solution method and characterized by transmission electron microscopy.CO2 temperature‐programmed desorption and gas sensor experiments further confirmed the enhancement of the CO2 adsorption and CO2*hydrogenation ability of the CuPd(100)interface catalyst.Specifically,the obtained CuPd(100)interface catalyst exhibited a C2 Faradaic efficiency of 50.3%±1.2%at‒1.4 VRHE in 0.1 M KHCO3,which was 2.1 times higher than that of the Cu catalyst(23.6%±1.5%).This study provides the basis for the rational design of Cu‐based electrocatalysts for the generation of multicarbon products by fine‐tuning the intermediate reaction barriers.展开更多
An efficient catalyst system based on a Pd-metalated porous organic polymer bearing phenanthroline ligands was designed and synthesized.This catalyst was applied to various C–C bond-forming reactions,including the Su...An efficient catalyst system based on a Pd-metalated porous organic polymer bearing phenanthroline ligands was designed and synthesized.This catalyst was applied to various C–C bond-forming reactions,including the Suzuki,Heck and Sonogashira couplings,and afforded the corresponding products while exhibiting excellent activities and selectivities.More importantly,this catalyst can be readily recycled.These features show that such catalysts have significant potential applications in the future.展开更多
The potential （E）-dependent vibrational behavior of a saturated CO adlayer on Au-core Pd-shell nanoparticle film electrodes was investigated over a wide potential range, in acidic, neutral, and basic solutions, usin...The potential （E）-dependent vibrational behavior of a saturated CO adlayer on Au-core Pd-shell nanoparticle film electrodes was investigated over a wide potential range, in acidic, neutral, and basic solutions, using in situ surface-enhanced Raman spectroscopy （SERS）. Over the whole of the examined potential region （-1.5 to 0.55 V vs. NHE）, the peak frequencies of both the C-OM and the Pd-COM band （here, M denotes the multiply-bonded configuration） displayed three distinct linear regions： dvc oM/dE decreased from -185-207 （from -1.5 to -1.2 V） to -83-84 cm-1/V （-1.2 to -0.15 V）, and then to 43 cm-1/V （-0.2 to 0.55 V）; on the other hand, dvpd coM/dE changed from -10 to -8 cm I/V （from -1.5 to -1.2 V） to ^-31 to -30 cm-1/V （-1.2 to -0.15 V）, and then to -15 cm-1/V （-0.2 to 0.55 V）. The simultaneously recorded cyclic voltammograms revealed that at E 〈 -1.2 V, a hydro- gen evolution reaction （HER） occurred. With the help of periodic density functional theory calcula- tions using two different （2 × 2）-3CO slab models with Pd（111）, the unusually high dvc-oM/dE and the small dVPd-CoM/dE in the HER region were explained as being due to the conversion of COad from bridge to hollow sites, which was induced by the co-adsorbed hydrogen atoms formed from dissociated water at negative potentials.展开更多
The compound metal oxide LaxPbyMnzO used as support was prepared by the sol-gel method, and the catalyst in which Pd was used as active component and Sn as co-active component for direct synthesis of diphenyl carbonat...The compound metal oxide LaxPbyMnzO used as support was prepared by the sol-gel method, and the catalyst in which Pd was used as active component and Sn as co-active component for direct synthesis of diphenyl carbonate (DPC) with heterogeneous catalytic reaction was obtained by co-calcination and precipitation respectively.The catalyst was characterized by XRD, SEM and TEM respectively. The specific surface area of catalysts was measured by ChemBET3000 instrument, and the activity of the catalysts was tested by the synthesis of DPC in a pressured reactor. The results showed that when the co-active component Sn was added by co-calcination method A, its loading content was equal to 14.43% and active component Pd was loaded by precipitation, the yield and selectivity of DPC could reach 26.78% and 99% respectively.展开更多
After utilizing an improved method for adding a non-precious promoter to the precious Pd/C catalyst during hydrogenation of benzoic acid, a new understanding concerning regeneration of deactivated Pd/C catalyst has be...After utilizing an improved method for adding a non-precious promoter to the precious Pd/C catalyst during hydrogenation of benzoic acid, a new understanding concerning regeneration of deactivated Pd/C catalyst has been obtained, and an improved process has emerged. The improved process can avoid the conventional technical shortcomings related with hydrogenation of benzoic acid such as the quick decline of catalyst activity in a relatively short period of time and low palladium recovery from the spent catalyst. Furthermore, according to this process, cyclohexane carboxylic acid （CCA） can be produced Pavorably in a commercial scale at a high selectivity and product yield with a extended catalyst life.展开更多
The catalytic reaction of NO with CO and decomposition of NO over metal modified ACFs were investigated and compared with other carriers supported catalysts. It is demonstrated that Pd/ACF and Pd/Cu/ACF have high cata...The catalytic reaction of NO with CO and decomposition of NO over metal modified ACFs were investigated and compared with other carriers supported catalysts. It is demonstrated that Pd/ACF and Pd/Cu/ACF have high catalytic activity for the reaction of NO/CO, while Pt/ACF, Pt/Cu/ACF and Co/Cu/ACF have very low catalytic activity in similar circumstance. Pd-modified ACF possesses high catalytic decomposition of NO at 300℃. Pd/CB and Pd/GAC present good catalytic decomposition ability for NO only at low flowrate. Pd/G, Pd/ZMS and Pd/A however, do not show any catalytic activity for NO decomposition even at 400℃. Catalytic temperature, NO flowrate and loading of metal components affect the decomposition rate of NO. The coexistence of Cu with Pd on Cu/Pd/ACF leads to crystalline of palladium to more unperfected so as to that increase the catalytic activity.展开更多
A nanocomposite electrocatalyst was prepared with the method of cluster beam deposition of palladium nanoparticle thin lms on carbon nanoparticle supporting layers and used as sensitive nonenzyme hydrogen peroxide sen...A nanocomposite electrocatalyst was prepared with the method of cluster beam deposition of palladium nanoparticle thin lms on carbon nanoparticle supporting layers and used as sensitive nonenzyme hydrogen peroxide sensors. An enhancement on the electrocatalytic activity of the palladium nanoparticles toward H2O2 reduction was observed, which was related to the coverage of the carbon nanoparticles. With one monolayer of carbon nanoparticles, the H2O2 detection sensitivity reached the maximum, which was more than twice of that of the pure Pd nanoparticles.展开更多
基金supported by the National Natural Science Foundation of China(91745106,21633013)the Major Projects of the National Natural Science Foundation of Gansu,China(18JR4RA001)+1 种基金the Youth Innovation Promotion Association CAS(2019409)Fujian Institute of Innovation,CAS and Key Research Program of Frontier Sciences of CAS(QYZDJ-SSW-SLH051)~~
文摘For the first time, Pd supported on natural palygorskite was developed for amine formylation with CO2 and H2. Both secondary and primary amines with diverse structures could be converted into the desired formamides at < 100 °C, and good to excellent yields were obtained.
文摘Electrochemical CO2 reduction is a promising strategy for the utilization of CO2 and intermittent excess electricity.Cu is the only single metal catalyst that can electrochemically convert CO2 into multicarbon products.However,Cu exhibits an unfavorable activity and selectivity for the generation of C2 products because of the insufficient amount of CO*provided for the C‐C coupling.Based on the strong CO2 adsorption and ultrafast reaction kinetics of CO*formation on Pd,an intimate CuPd(100)interface was designed to lower the intermediate reaction barriers and improve the efficiency of C2 product formation.Density functional theory(DFT)calculations showed that the CuPd(100)interface enhanced the CO2 adsorption and decreased the CO2*hydrogenation energy barrier,which was beneficial for the C‐C coupling.The potential‐determining step(PDS)barrier of CO2 to C2 products on the CuPd(100)interface was 0.61 eV,which was lower than that on Cu(100)(0.72 eV).Encouraged by the DFT calculation results,the CuPd(100)interface catalyst was prepared by a facile chemical solution method and characterized by transmission electron microscopy.CO2 temperature‐programmed desorption and gas sensor experiments further confirmed the enhancement of the CO2 adsorption and CO2*hydrogenation ability of the CuPd(100)interface catalyst.Specifically,the obtained CuPd(100)interface catalyst exhibited a C2 Faradaic efficiency of 50.3%±1.2%at‒1.4 VRHE in 0.1 M KHCO3,which was 2.1 times higher than that of the Cu catalyst(23.6%±1.5%).This study provides the basis for the rational design of Cu‐based electrocatalysts for the generation of multicarbon products by fine‐tuning the intermediate reaction barriers.
基金supported by the National Natural Foundation of China(21422306,21203165,21403193)the Fundamental Research Funds for the Central Universities(2015XZZX004-04)~~
文摘An efficient catalyst system based on a Pd-metalated porous organic polymer bearing phenanthroline ligands was designed and synthesized.This catalyst was applied to various C–C bond-forming reactions,including the Suzuki,Heck and Sonogashira couplings,and afforded the corresponding products while exhibiting excellent activities and selectivities.More importantly,this catalyst can be readily recycled.These features show that such catalysts have significant potential applications in the future.
基金supported by the National Natural Science Foundation of China(21473175)the National Instrumentation Program(2011YQ03012416)the National Basic Reserarch Program of China(973 Program,2015CB932301)
文摘The potential （E）-dependent vibrational behavior of a saturated CO adlayer on Au-core Pd-shell nanoparticle film electrodes was investigated over a wide potential range, in acidic, neutral, and basic solutions, using in situ surface-enhanced Raman spectroscopy （SERS）. Over the whole of the examined potential region （-1.5 to 0.55 V vs. NHE）, the peak frequencies of both the C-OM and the Pd-COM band （here, M denotes the multiply-bonded configuration） displayed three distinct linear regions： dvc oM/dE decreased from -185-207 （from -1.5 to -1.2 V） to -83-84 cm-1/V （-1.2 to -0.15 V）, and then to 43 cm-1/V （-0.2 to 0.55 V）; on the other hand, dvpd coM/dE changed from -10 to -8 cm I/V （from -1.5 to -1.2 V） to ^-31 to -30 cm-1/V （-1.2 to -0.15 V）, and then to -15 cm-1/V （-0.2 to 0.55 V）. The simultaneously recorded cyclic voltammograms revealed that at E 〈 -1.2 V, a hydro- gen evolution reaction （HER） occurred. With the help of periodic density functional theory calcula- tions using two different （2 × 2）-3CO slab models with Pd（111）, the unusually high dvc-oM/dE and the small dVPd-CoM/dE in the HER region were explained as being due to the conversion of COad from bridge to hollow sites, which was induced by the co-adsorbed hydrogen atoms formed from dissociated water at negative potentials.
基金Supported by the National Natural Science Foundation of China (No. 20076036) and Wuhan Municipal Bureau of Science and Technology.
文摘The compound metal oxide LaxPbyMnzO used as support was prepared by the sol-gel method, and the catalyst in which Pd was used as active component and Sn as co-active component for direct synthesis of diphenyl carbonate (DPC) with heterogeneous catalytic reaction was obtained by co-calcination and precipitation respectively.The catalyst was characterized by XRD, SEM and TEM respectively. The specific surface area of catalysts was measured by ChemBET3000 instrument, and the activity of the catalysts was tested by the synthesis of DPC in a pressured reactor. The results showed that when the co-active component Sn was added by co-calcination method A, its loading content was equal to 14.43% and active component Pd was loaded by precipitation, the yield and selectivity of DPC could reach 26.78% and 99% respectively.
文摘After utilizing an improved method for adding a non-precious promoter to the precious Pd/C catalyst during hydrogenation of benzoic acid, a new understanding concerning regeneration of deactivated Pd/C catalyst has been obtained, and an improved process has emerged. The improved process can avoid the conventional technical shortcomings related with hydrogenation of benzoic acid such as the quick decline of catalyst activity in a relatively short period of time and low palladium recovery from the spent catalyst. Furthermore, according to this process, cyclohexane carboxylic acid （CCA） can be produced Pavorably in a commercial scale at a high selectivity and product yield with a extended catalyst life.
基金Major Natural Science Foundation of Guangdong Province, The Team Project of Guangdong Province and the Talent Training Program Foundation of the Higher Education Department of Gangdong Province.
文摘The catalytic reaction of NO with CO and decomposition of NO over metal modified ACFs were investigated and compared with other carriers supported catalysts. It is demonstrated that Pd/ACF and Pd/Cu/ACF have high catalytic activity for the reaction of NO/CO, while Pt/ACF, Pt/Cu/ACF and Co/Cu/ACF have very low catalytic activity in similar circumstance. Pd-modified ACF possesses high catalytic decomposition of NO at 300℃. Pd/CB and Pd/GAC present good catalytic decomposition ability for NO only at low flowrate. Pd/G, Pd/ZMS and Pd/A however, do not show any catalytic activity for NO decomposition even at 400℃. Catalytic temperature, NO flowrate and loading of metal components affect the decomposition rate of NO. The coexistence of Cu with Pd on Cu/Pd/ACF leads to crystalline of palladium to more unperfected so as to that increase the catalytic activity.
基金supported by the National Natural Science Foundation of China(No.11627806 and No.61301015)supported by a Project funded by the Priority Academic Programme Development of Jiangsu Higher Education Institutions
文摘A nanocomposite electrocatalyst was prepared with the method of cluster beam deposition of palladium nanoparticle thin lms on carbon nanoparticle supporting layers and used as sensitive nonenzyme hydrogen peroxide sensors. An enhancement on the electrocatalytic activity of the palladium nanoparticles toward H2O2 reduction was observed, which was related to the coverage of the carbon nanoparticles. With one monolayer of carbon nanoparticles, the H2O2 detection sensitivity reached the maximum, which was more than twice of that of the pure Pd nanoparticles.
