A photocatalyst composed of TiO 2 nanotube arrays（TNTs） and octahedral Cu2 O nanoparticles was fabricated,and its performance in the photocatalytic reduction of CO2 under visible and simulated solar irradiation was ...A photocatalyst composed of TiO 2 nanotube arrays（TNTs） and octahedral Cu2 O nanoparticles was fabricated,and its performance in the photocatalytic reduction of CO2 under visible and simulated solar irradiation was studied. The average nanotube diameter and length was 100 nm and 5 μm,respectively. The different amount of octahedral Cu2 O modified TNTs were obtained by varying electrochemical deposition time. TNTs modified with an optimized amount of Cu2 O nanoparticles exhibited high efficiency in the photocatalysis,and the predominant hydrocarbon product was methane. The methane yield increased with increasing Cu2 O content of the catalyst up to a certain deposition time,and decreased with further increase in Cu2 O deposition time. Insufficient deposition time（5 min） resulted in a small amount of Cu2 O nanoparticles on the TNTs,leading to the disadvantage of harvesting light. However,excess deposition time（45 min） gave rise to entire TNT surface being most covered with Cu2 O nanoparticles with large sizes,inconvenient for the transport of photo-generated carriers. The highest methane yield under simulated solar and visible light irradiation was observed for the catalysts prepared at a Cu2 O deposition time of 15 and 30 min respectively. The morphology,crystallization,photoresponse and electrochemical properties of the catalyst were characterized to understand the mechanism of its high photocatalytic activity. The TNT structure provided abundant active sites for the adsorption of reactants,and promoted the transport of photogenerated carriers that improved charge separation. Modifying the TNTs with octahedral Cu2 O nanoparticles promoted light absorption,and prevented the hydrocarbon product from oxidation. These factors provided the Cu2O-modified TNT photocatalyst with high efficiency in the reduction of CO2,without requiring co-catalysts or sacrificial agents.展开更多
The development and research on the recycle demetallating process are introduced. It shows the recycle demetallating process is effective on removing metal elements in heavy crude oil, especially with regard to calciu...The development and research on the recycle demetallating process are introduced. It shows the recycle demetallating process is effective on removing metal elements in heavy crude oil, especially with regard to calcium, through commercial application in delayed coking unit. Finally, the ash content in petroleum coke can be decreased to less than 0.5%, which complies with the IB coke standard. At the same time, the recycle demetallating process is an environmentally friendly technique, which has little effect on production quality and equipment corrosion.展开更多
基金supported by the National Natural Science Foundation of China(2137704421573085)+5 种基金the Key Project of Natural Science Foundation of Hubei Province(2015CFA037)Wuhan Planning Project of Science and Technology(2014010101010023)Self-determined Research Funds of CCNU from the Colleges’Basic Research and Operation of MOE(CCNU15ZD007CCNU15KFY005)China Postdoctoral Science Foundation(2015M572187)Hubei Provincial Department of Education(D20152702)~~
文摘A photocatalyst composed of TiO 2 nanotube arrays（TNTs） and octahedral Cu2 O nanoparticles was fabricated,and its performance in the photocatalytic reduction of CO2 under visible and simulated solar irradiation was studied. The average nanotube diameter and length was 100 nm and 5 μm,respectively. The different amount of octahedral Cu2 O modified TNTs were obtained by varying electrochemical deposition time. TNTs modified with an optimized amount of Cu2 O nanoparticles exhibited high efficiency in the photocatalysis,and the predominant hydrocarbon product was methane. The methane yield increased with increasing Cu2 O content of the catalyst up to a certain deposition time,and decreased with further increase in Cu2 O deposition time. Insufficient deposition time（5 min） resulted in a small amount of Cu2 O nanoparticles on the TNTs,leading to the disadvantage of harvesting light. However,excess deposition time（45 min） gave rise to entire TNT surface being most covered with Cu2 O nanoparticles with large sizes,inconvenient for the transport of photo-generated carriers. The highest methane yield under simulated solar and visible light irradiation was observed for the catalysts prepared at a Cu2 O deposition time of 15 and 30 min respectively. The morphology,crystallization,photoresponse and electrochemical properties of the catalyst were characterized to understand the mechanism of its high photocatalytic activity. The TNT structure provided abundant active sites for the adsorption of reactants,and promoted the transport of photogenerated carriers that improved charge separation. Modifying the TNTs with octahedral Cu2 O nanoparticles promoted light absorption,and prevented the hydrocarbon product from oxidation. These factors provided the Cu2O-modified TNT photocatalyst with high efficiency in the reduction of CO2,without requiring co-catalysts or sacrificial agents.
文摘The development and research on the recycle demetallating process are introduced. It shows the recycle demetallating process is effective on removing metal elements in heavy crude oil, especially with regard to calcium, through commercial application in delayed coking unit. Finally, the ash content in petroleum coke can be decreased to less than 0.5%, which complies with the IB coke standard. At the same time, the recycle demetallating process is an environmentally friendly technique, which has little effect on production quality and equipment corrosion.
