Fracture and cavern hydrocarbon reservoirs in carbonates are an important pool type worldwide. The karst cavern reservoirs are easiest to identify on seismic reflection data. The prediction, exploration, and developme...Fracture and cavern hydrocarbon reservoirs in carbonates are an important pool type worldwide. The karst cavern reservoirs are easiest to identify on seismic reflection data. The prediction, exploration, and development of this type of reservoir require theoretical research on seismic wave fields reflected from complex inhomogeneous media. We compute synthetic seismic sections for fluidfilled cavern reservoirs of various heights and widths using random media models and inhomogeneous media elastic wave equations. Results indicate that even caverns significantly smaller than 1/ 4 wavelength are detectible on conventional band-width seismic sections as diffractions migrated into bead-type events. Diffraction amplitude is a function of cavern height and width. We introduce a width-amplitude factor which can be used to calculate the diffraction amplitude of a cavern with a limited width from the diffraction amplitude computed for an infinitely wide cavern.展开更多
The thermal decomposition process of basic magnesium carbonate was investigated. Firstly, Basic magnesium carbonate was prepared from magnesite, and the characteristics of the product were detected by X-ray diffracti...The thermal decomposition process of basic magnesium carbonate was investigated. Firstly, Basic magnesium carbonate was prepared from magnesite, and the characteristics of the product were detected by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. Subsequently, the thermal decomposition process of basic magnesium carbonate in air was studied by thermogravimetry-differential thermogravimetry （TG-DTG）. The results of XRD confirm that the chemical composition of basic magnesium carbonate is 4MgCO3·Mg（OH）2·4H2O. And the SEM images show that the sample is in sheet structure, with a diameter of 0.1-1 μm. The TG-DTG results demonstrate that there are two steps in the thermal decomposition process of basic magnesium carbonate. The apparent activation energies （E） were calculated by Flyrm-Wall-Ozawa method. It is obtained from Coats-Redfem＇s equation and Malek method that the mechanism functions of the two decomposition stages are D3 and A1.5, respectively. And then, the kinetic equations of the two steps were deduced as well.展开更多
Objective. To investigate clinically useful markers for determining the seventy of hemorrhagic shock and adequacy of resuscitation Methods. Prospective study was undertaken in 12 dogs, using an established model for h...Objective. To investigate clinically useful markers for determining the seventy of hemorrhagic shock and adequacy of resuscitation Methods. Prospective study was undertaken in 12 dogs, using an established model for hemorrhagic shock. The anesthetized dogs were bled to a mean arterial pressure of 40 mmHg which was maintained for 3 hours. Then each animal was resuscitated with heperinized whole blood followed by intravenous infusion of dobutamine at a rate of 5 ug. kg-1. min-1 for 10 minutes. Arterial and mixed venous blood gases, arterial lactate concentrations and hemodynamic Parameters were measured throughout the study. Results. A difference in the PCO2 and pH values between arterial and mixed venous blood was observed. Arterial-venous PCO2 and pH difference increased significantly after sustained shock. The arteriovenous carbon dioxide and pH gradients recovered more rapidly than arterial lactate levels after successful resuscitation with blood and dobutamine. Conclusion. Arterial blood gases fail to reflect the acid-base status of tissues during hemorrhagic shock. The differences in PCO2 and pH values between arterial and mixed venous blood could be used as clinical in- dicators for assessing the seventy of shock and efficacy of resuscitation.展开更多
According to the data of the experiment made in mechanical tensile of Polycarbonate in high temperature, experiments were done to polycarbonate sheet by hot gas pressure bulge-forming. It was found that selecting and ...According to the data of the experiment made in mechanical tensile of Polycarbonate in high temperature, experiments were done to polycarbonate sheet by hot gas pressure bulge-forming. It was found that selecting and combination of the processing parameters were vital to the quality. In the experiments and numerical simulation with the software of DYNAFORM, the processing parameters have been studied.The results showed that the method of discontinuous pressure and pressure preservation advantage the forming; when temperature and pressure meet the forming conditions, the longer time of pressure preservation promotes sufficient forming.展开更多
Nowadays, isotope environmental technique tends to be used as a reconnaissance tool , both qualitative and quantitative, to calculate the aquifer parameters particularly in carbonate rock aquifers. But, the hetero...Nowadays, isotope environmental technique tends to be used as a reconnaissance tool , both qualitative and quantitative, to calculate the aquifer parameters particularly in carbonate rock aquifers. But, the heterogeneous flow is still problematic when Lumped parameter Models are usually used to calculate the residence times and hydraulic parameters. However, Discrete State Compartment Model can provide a powerful model to heterogeneous medium. One such study was carried on in Dazha valley, where the environmental tritium was used as a tracer for determining hydrogeological parameters based on a discrete state compartment model展开更多
Na2CO3, Li2CO3, and K2CO3 were used as additives to Pingshuo （PS） coal that was subsequently gasified under a CO2 stream. The catalytic gasification of coal samples by CO2 in the presence single or mixed alkali carb...Na2CO3, Li2CO3, and K2CO3 were used as additives to Pingshuo （PS） coal that was subsequently gasified under a CO2 stream. The catalytic gasification of coal samples by CO2 in the presence single or mixed alkali carbonates was investigated by thermogravimetric analysis. The experimental results indicate that the catalytic effect of Li2CO3 is significantly larger than that of Na2CO3 or K2CO3. The catalytic effect of the mixed, bi-metal carbonate containing Li2C03 and Na2C03, or Li2CO3, and K2C03, is related to the compo- sition of the catalyst and the proportion of the two components. The bi-metal carbonates having a mole ratio of 9：1 （lri：x） has the largest catalytic effect for PS coal gasification. A synergistic effect between Li and K, or Na, carbonate appears at temperatures greater than 1300 K. An un-reacted shrinking core model is suitable for kinetic analysis of catalytic gasification of coal samples in the presence of alkali carbonates. It is inappropriate, however, to evaluate the catalytic effect only by the activation energy obtained from the kinetic calculations.展开更多
Study on the carbonate content and oxygen isotope of a sediment section in Dabusu Lake revealed that this region has experienced several cold wet and warm dry climatic cycles since 15400 a BP. It was about 6740 a BP w...Study on the carbonate content and oxygen isotope of a sediment section in Dabusu Lake revealed that this region has experienced several cold wet and warm dry climatic cycles since 15400 a BP. It was about 6740 a BP when the climate in the region reached a relatively stable warm stage, so that the lake water was gradually condensed and finally a saline lake was formed.展开更多
The electrochemical behavior of X70 pipeline steel in (0.5mol·L-1 Na2CO3+1 mol·L-1 NaHCO3) solution was studied by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). X-ray photoel...The electrochemical behavior of X70 pipeline steel in (0.5mol·L-1 Na2CO3+1 mol·L-1 NaHCO3) solution was studied by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were used to analyze the composition and microstructure of the surface film. The results showed that there were two anodic peaks at -600 mV and -350 mV. The surface film formed at -600 mV mainly consisted of ferrous carbonates and ferrous hydroxycarbonates. It had a small reaction resistance. It was metastable and possessed poor protective property. Numerous pits and microcracks existed on the film, which could be the active paths for the initiation of stress corrosion cracking. The surface film formed at -350 mV, mainly consisted of ferric oxides. It has high reaction resistance and offered good protection for the substrate.展开更多
基金This research project is sponsored by Nation’s Natural Science Found of China (No. 40174034 and 40274038) as well as theOpening Found Projects of the CNPC geophysical exploration key laboratory (No. GPKL0207).
文摘Fracture and cavern hydrocarbon reservoirs in carbonates are an important pool type worldwide. The karst cavern reservoirs are easiest to identify on seismic reflection data. The prediction, exploration, and development of this type of reservoir require theoretical research on seismic wave fields reflected from complex inhomogeneous media. We compute synthetic seismic sections for fluidfilled cavern reservoirs of various heights and widths using random media models and inhomogeneous media elastic wave equations. Results indicate that even caverns significantly smaller than 1/ 4 wavelength are detectible on conventional band-width seismic sections as diffractions migrated into bead-type events. Diffraction amplitude is a function of cavern height and width. We introduce a width-amplitude factor which can be used to calculate the diffraction amplitude of a cavern with a limited width from the diffraction amplitude computed for an infinitely wide cavern.
基金Project(20876160) supported by the National Natural Science Foundation of China
文摘The thermal decomposition process of basic magnesium carbonate was investigated. Firstly, Basic magnesium carbonate was prepared from magnesite, and the characteristics of the product were detected by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. Subsequently, the thermal decomposition process of basic magnesium carbonate in air was studied by thermogravimetry-differential thermogravimetry （TG-DTG）. The results of XRD confirm that the chemical composition of basic magnesium carbonate is 4MgCO3·Mg（OH）2·4H2O. And the SEM images show that the sample is in sheet structure, with a diameter of 0.1-1 μm. The TG-DTG results demonstrate that there are two steps in the thermal decomposition process of basic magnesium carbonate. The apparent activation energies （E） were calculated by Flyrm-Wall-Ozawa method. It is obtained from Coats-Redfem＇s equation and Malek method that the mechanism functions of the two decomposition stages are D3 and A1.5, respectively. And then, the kinetic equations of the two steps were deduced as well.
文摘Objective. To investigate clinically useful markers for determining the seventy of hemorrhagic shock and adequacy of resuscitation Methods. Prospective study was undertaken in 12 dogs, using an established model for hemorrhagic shock. The anesthetized dogs were bled to a mean arterial pressure of 40 mmHg which was maintained for 3 hours. Then each animal was resuscitated with heperinized whole blood followed by intravenous infusion of dobutamine at a rate of 5 ug. kg-1. min-1 for 10 minutes. Arterial and mixed venous blood gases, arterial lactate concentrations and hemodynamic Parameters were measured throughout the study. Results. A difference in the PCO2 and pH values between arterial and mixed venous blood was observed. Arterial-venous PCO2 and pH difference increased significantly after sustained shock. The arteriovenous carbon dioxide and pH gradients recovered more rapidly than arterial lactate levels after successful resuscitation with blood and dobutamine. Conclusion. Arterial blood gases fail to reflect the acid-base status of tissues during hemorrhagic shock. The differences in PCO2 and pH values between arterial and mixed venous blood could be used as clinical in- dicators for assessing the seventy of shock and efficacy of resuscitation.
基金Sponsored by the Scientific Research Foundation of Harbin Institute of Technology(Grant No.HIT.2000.65).
文摘According to the data of the experiment made in mechanical tensile of Polycarbonate in high temperature, experiments were done to polycarbonate sheet by hot gas pressure bulge-forming. It was found that selecting and combination of the processing parameters were vital to the quality. In the experiments and numerical simulation with the software of DYNAFORM, the processing parameters have been studied.The results showed that the method of discontinuous pressure and pressure preservation advantage the forming; when temperature and pressure meet the forming conditions, the longer time of pressure preservation promotes sufficient forming.
文摘Nowadays, isotope environmental technique tends to be used as a reconnaissance tool , both qualitative and quantitative, to calculate the aquifer parameters particularly in carbonate rock aquifers. But, the heterogeneous flow is still problematic when Lumped parameter Models are usually used to calculate the residence times and hydraulic parameters. However, Discrete State Compartment Model can provide a powerful model to heterogeneous medium. One such study was carried on in Dazha valley, where the environmental tritium was used as a tracer for determining hydrogeological parameters based on a discrete state compartment model
基金supports of the National Natural Science Foundation of China (No.20776092)the Natural Science Foundation of Shanxi Province(No. 2008011019)+1 种基金the Shanxi Research Foundation to Returned Scholars (No. 2007-30)the Shanxi Province Basic Conditions Plat form for Science and Technology Project (No. 2010091015)
文摘Na2CO3, Li2CO3, and K2CO3 were used as additives to Pingshuo （PS） coal that was subsequently gasified under a CO2 stream. The catalytic gasification of coal samples by CO2 in the presence single or mixed alkali carbonates was investigated by thermogravimetric analysis. The experimental results indicate that the catalytic effect of Li2CO3 is significantly larger than that of Na2CO3 or K2CO3. The catalytic effect of the mixed, bi-metal carbonate containing Li2C03 and Na2C03, or Li2CO3, and K2C03, is related to the compo- sition of the catalyst and the proportion of the two components. The bi-metal carbonates having a mole ratio of 9：1 （lri：x） has the largest catalytic effect for PS coal gasification. A synergistic effect between Li and K, or Na, carbonate appears at temperatures greater than 1300 K. An un-reacted shrinking core model is suitable for kinetic analysis of catalytic gasification of coal samples in the presence of alkali carbonates. It is inappropriate, however, to evaluate the catalytic effect only by the activation energy obtained from the kinetic calculations.
文摘Study on the carbonate content and oxygen isotope of a sediment section in Dabusu Lake revealed that this region has experienced several cold wet and warm dry climatic cycles since 15400 a BP. It was about 6740 a BP when the climate in the region reached a relatively stable warm stage, so that the lake water was gradually condensed and finally a saline lake was formed.
基金Supported by State Key Basic Research Plan (G19990650).
文摘The electrochemical behavior of X70 pipeline steel in (0.5mol·L-1 Na2CO3+1 mol·L-1 NaHCO3) solution was studied by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were used to analyze the composition and microstructure of the surface film. The results showed that there were two anodic peaks at -600 mV and -350 mV. The surface film formed at -600 mV mainly consisted of ferrous carbonates and ferrous hydroxycarbonates. It had a small reaction resistance. It was metastable and possessed poor protective property. Numerous pits and microcracks existed on the film, which could be the active paths for the initiation of stress corrosion cracking. The surface film formed at -350 mV, mainly consisted of ferric oxides. It has high reaction resistance and offered good protection for the substrate.
