Based on the proper assumptions and approximations, the coupling mechanism of the electromagnetic acoustic transducer (EMAT) for ultrasonic generation within ferromagnetic material was studied by analyzing the eddy cu...Based on the proper assumptions and approximations, the coupling mechanism of the electromagnetic acoustic transducer (EMAT) for ultrasonic generation within ferromagnetic material was studied by analyzing the eddy current distribution, Lorentz force, magnetostriction force and magnetization force. Some useful numerical calculations are presented to explain the EMAT behavior with general geometric arrangements. It is indicated that for the ferromagnetic material the magnetostriction effect dominates the EMAT phenomenon for ultrasonic wave generation in low magnetic field intensity, while the material does not reach its magnetizing saturation. But, with the increase of the bias magnetic field and saturation, the magnetostrictive terms will make no contributions to the ultrasonic generation and the Lorentz force becomes the only exciting mechanism. It is important to determine both the Lorentz and magnetostriction forces and select the appropriate working manner for achieving an optimized design.展开更多
The fabrication of magnetorheological （MR） elastomers was studied by two vulcanization methods, including heat vulcanization （HV） and radiation vulcanization （RV）, were employed to fabricate MRE samples. The dyn...The fabrication of magnetorheological （MR） elastomers was studied by two vulcanization methods, including heat vulcanization （HV） and radiation vulcanization （RV）, were employed to fabricate MRE samples. The dynamical mechanical properties were characterized by using a dynamic mechanic analyzer. In particular, both the MR effect and its durability were investigated. The experimental results showed that RV samples have large magnetoinduced modulus, large zero-field modulus, and good durability property of MR effect. To explain these results, cubic deformation and plasticizer migration were analyzed. Large magneto-induced modulus of RV sample results from cubic deformation during vulcanization process. And the plasticizer migration results in better durability of MR effect.展开更多
The primary objective of present investigation is to introduce the novel aspects of convective mass condition and thermal radiation in the peristaltic transport of fluid. Magnetohydrodynamic(MHD) fluid was considered ...The primary objective of present investigation is to introduce the novel aspects of convective mass condition and thermal radiation in the peristaltic transport of fluid. Magnetohydrodynamic(MHD) fluid was considered in a symmetric channel. Heat and mass transfer characteristics were analyzed in the presence of Soret and Dufour effects, and the results were presented via two forms of thermal radiation. The temperature, concentration and pressure rise per wavelength were examined. It is observed that the velocity slip and magnetic field parameters have opposite effects on the pressure rise per wavelength. Temperature of fluid is a decreasing function of the radiation parameter. Further, the temperature of fluid decreases by increasing the heat transfer Biot number. It is notified that the heat transfer rate at the wall is a decreasing function of radiation parameter.展开更多
The main goal of this paper is to investigate natural convective heat transfer and flow characteristics of non-Newtonian nanofluid streaming between two infinite vertical flat plates in the presence of magnetic field ...The main goal of this paper is to investigate natural convective heat transfer and flow characteristics of non-Newtonian nanofluid streaming between two infinite vertical flat plates in the presence of magnetic field and thermal radiation.Initially,a similarity transformation is used to convert momentum and energy conservation equations in partial differential forms into non-linear ordinary differential equations (ODE) applying meaningful boundary conditions.In order to obtain the non-linear ODEs analytically,Galerkin method (GM) is employed.Subsequently,the ODEs are also solved by a reliable numerical solution.In order to test the accuracy,precision and reliability of the analytical method,results of the analytical analysis are compared with the numerical results.With respect to the comparisons,fairly good compatibilities with insignificant errors are observed.Eventually,the impacts of effective parameters including magnetic and radiation parameters and nanofluid volume fraction on the velocity,skin friction coefficient and Nusselt number distributions are comprehensively described.Based on the results,it is revealed that with increasing the role of magnetic force,velocity profile,skin friction coefficient and thermal performance descend.Radiation parameter has insignificant influence on velocity profile while it obviously has augmentative and decreasing effects on skin friction and Nusselt number,respectively.展开更多
The present article has been fine-tuned with the investigation of mixed convection Darcy-Forchheimer flow of ZnO-SAE50 oil nanolubricant over an inclined rotating disk under the influence of uniform applied magnetic f...The present article has been fine-tuned with the investigation of mixed convection Darcy-Forchheimer flow of ZnO-SAE50 oil nanolubricant over an inclined rotating disk under the influence of uniform applied magnetic field applied to various industries.The current study has been enriched with additional consideration of slip flow,thermal radiation,viscous dissipation,Joulian dissipation and internal heating.In view of augmentation of thermal conductivity of nanolubricant,a new micro-nano-convection model namely Patel model has been invoked.The specialty of this model involves the effects of specific surface area and nano-convection due to Brownian motion of nanoparticles,kinetic theory based micro-convection,liquid layering and particle concentration.Suitably transformed governing equations have been solved numerically by using Runge-Kutta-Fehlberg scheme.An analysis of the present study has shown that applied magnetic field,porosity of the medium,velocity slip and inertia coefficient account for the slowing down of radial as well as tangential flow of ZnO-SAE50 oil nanolubricant,thereby leading to an improvement in velocity and thermal boundary layers.展开更多
Optimal parameters for depositing Titanium nitride （TIN） thin films by DC reactive magnetron sputtering were determined. TiN thin films were deposited on Si （100） substrates by DC reactive magnetron sputtering, at...Optimal parameters for depositing Titanium nitride （TIN） thin films by DC reactive magnetron sputtering were determined. TiN thin films were deposited on Si （100） substrates by DC reactive magnetron sputtering, at different temperatures, different electrical current values, and different N2/Ar ratios. Structural characteristics of TiN thin films were measured by X-ray diffraction （XRD）; surface morphology of the thin films was characterized using an atomic force microscope （AFM）. The electric resistivity of the TiN films was measured by a four-point probe. In the result, temperature is 500℃, electrical current value is 1.6 A, pure N2 is the reacting gas, TiN thin film has the preferred （200） orientation, resistance is small enough for its use as bottom electrodes.展开更多
Na-doped p-type ZnO thin films have been realized by DC reactive magnetron sputtering with a set of metal-Zn targets doped with various Na contents and under different substrate temperatures, respectively. Hall effect...Na-doped p-type ZnO thin films have been realized by DC reactive magnetron sputtering with a set of metal-Zn targets doped with various Na contents and under different substrate temperatures, respectively. Hall effect measurement, field-emission SEM, X-ray diffraction and optical transmission were carried out to investigate the effects of Na content and substrate temperature on the properties of p-type films. Results indicate that all the Na-doped ZnO films are strongly （002） oriented, and have an average transmittance -85 % in the visible region. Na-doped p-type ZnO films with good structural, electrical, and optical properties can only be obtained at an intermediate amount of Na content and under appropriate substrate temperature. At the optimal condition, the Na-doped p-type ZnO has the lowest resistivity of 13. 8 Ω· cm with the carrier concentration as high as 1.07 × 10^18 em^-3. The stability of the Na-doped p-type ZnO is also studied in this paper and it is found that the electrical properties keep stable in a period of one month.展开更多
文摘Based on the proper assumptions and approximations, the coupling mechanism of the electromagnetic acoustic transducer (EMAT) for ultrasonic generation within ferromagnetic material was studied by analyzing the eddy current distribution, Lorentz force, magnetostriction force and magnetization force. Some useful numerical calculations are presented to explain the EMAT behavior with general geometric arrangements. It is indicated that for the ferromagnetic material the magnetostriction effect dominates the EMAT phenomenon for ultrasonic wave generation in low magnetic field intensity, while the material does not reach its magnetizing saturation. But, with the increase of the bias magnetic field and saturation, the magnetostrictive terms will make no contributions to the ultrasonic generation and the Lorentz force becomes the only exciting mechanism. It is important to determine both the Lorentz and magnetostriction forces and select the appropriate working manner for achieving an optimized design.
基金The work was supported by the National Natural Science Foundation of China （No.10672154）.
文摘The fabrication of magnetorheological （MR） elastomers was studied by two vulcanization methods, including heat vulcanization （HV） and radiation vulcanization （RV）, were employed to fabricate MRE samples. The dynamical mechanical properties were characterized by using a dynamic mechanic analyzer. In particular, both the MR effect and its durability were investigated. The experimental results showed that RV samples have large magnetoinduced modulus, large zero-field modulus, and good durability property of MR effect. To explain these results, cubic deformation and plasticizer migration were analyzed. Large magneto-induced modulus of RV sample results from cubic deformation during vulcanization process. And the plasticizer migration results in better durability of MR effect.
文摘The primary objective of present investigation is to introduce the novel aspects of convective mass condition and thermal radiation in the peristaltic transport of fluid. Magnetohydrodynamic(MHD) fluid was considered in a symmetric channel. Heat and mass transfer characteristics were analyzed in the presence of Soret and Dufour effects, and the results were presented via two forms of thermal radiation. The temperature, concentration and pressure rise per wavelength were examined. It is observed that the velocity slip and magnetic field parameters have opposite effects on the pressure rise per wavelength. Temperature of fluid is a decreasing function of the radiation parameter. Further, the temperature of fluid decreases by increasing the heat transfer Biot number. It is notified that the heat transfer rate at the wall is a decreasing function of radiation parameter.
文摘The main goal of this paper is to investigate natural convective heat transfer and flow characteristics of non-Newtonian nanofluid streaming between two infinite vertical flat plates in the presence of magnetic field and thermal radiation.Initially,a similarity transformation is used to convert momentum and energy conservation equations in partial differential forms into non-linear ordinary differential equations (ODE) applying meaningful boundary conditions.In order to obtain the non-linear ODEs analytically,Galerkin method (GM) is employed.Subsequently,the ODEs are also solved by a reliable numerical solution.In order to test the accuracy,precision and reliability of the analytical method,results of the analytical analysis are compared with the numerical results.With respect to the comparisons,fairly good compatibilities with insignificant errors are observed.Eventually,the impacts of effective parameters including magnetic and radiation parameters and nanofluid volume fraction on the velocity,skin friction coefficient and Nusselt number distributions are comprehensively described.Based on the results,it is revealed that with increasing the role of magnetic force,velocity profile,skin friction coefficient and thermal performance descend.Radiation parameter has insignificant influence on velocity profile while it obviously has augmentative and decreasing effects on skin friction and Nusselt number,respectively.
文摘The present article has been fine-tuned with the investigation of mixed convection Darcy-Forchheimer flow of ZnO-SAE50 oil nanolubricant over an inclined rotating disk under the influence of uniform applied magnetic field applied to various industries.The current study has been enriched with additional consideration of slip flow,thermal radiation,viscous dissipation,Joulian dissipation and internal heating.In view of augmentation of thermal conductivity of nanolubricant,a new micro-nano-convection model namely Patel model has been invoked.The specialty of this model involves the effects of specific surface area and nano-convection due to Brownian motion of nanoparticles,kinetic theory based micro-convection,liquid layering and particle concentration.Suitably transformed governing equations have been solved numerically by using Runge-Kutta-Fehlberg scheme.An analysis of the present study has shown that applied magnetic field,porosity of the medium,velocity slip and inertia coefficient account for the slowing down of radial as well as tangential flow of ZnO-SAE50 oil nanolubricant,thereby leading to an improvement in velocity and thermal boundary layers.
基金Project supported by the National Natural Science Foundation of China (No. 60478039) and the Natural Science Foundation of Zheji-ang Province (No. X405002), China
文摘Optimal parameters for depositing Titanium nitride （TIN） thin films by DC reactive magnetron sputtering were determined. TiN thin films were deposited on Si （100） substrates by DC reactive magnetron sputtering, at different temperatures, different electrical current values, and different N2/Ar ratios. Structural characteristics of TiN thin films were measured by X-ray diffraction （XRD）; surface morphology of the thin films was characterized using an atomic force microscope （AFM）. The electric resistivity of the TiN films was measured by a four-point probe. In the result, temperature is 500℃, electrical current value is 1.6 A, pure N2 is the reacting gas, TiN thin film has the preferred （200） orientation, resistance is small enough for its use as bottom electrodes.
基金Natural Science Foundation (60576063)Science and Technology Project of Zhejiang province(2008F70015)
文摘Na-doped p-type ZnO thin films have been realized by DC reactive magnetron sputtering with a set of metal-Zn targets doped with various Na contents and under different substrate temperatures, respectively. Hall effect measurement, field-emission SEM, X-ray diffraction and optical transmission were carried out to investigate the effects of Na content and substrate temperature on the properties of p-type films. Results indicate that all the Na-doped ZnO films are strongly （002） oriented, and have an average transmittance -85 % in the visible region. Na-doped p-type ZnO films with good structural, electrical, and optical properties can only be obtained at an intermediate amount of Na content and under appropriate substrate temperature. At the optimal condition, the Na-doped p-type ZnO has the lowest resistivity of 13. 8 Ω· cm with the carrier concentration as high as 1.07 × 10^18 em^-3. The stability of the Na-doped p-type ZnO is also studied in this paper and it is found that the electrical properties keep stable in a period of one month.
