Fatigue properties of magnetorheological elastomer （MRE） samples were investigated based on cis-polybutadiene rubber by using a fatigue test machine. Three MRE samples with iron particles mass fraction of 60%, 70%, ...Fatigue properties of magnetorheological elastomer （MRE） samples were investigated based on cis-polybutadiene rubber by using a fatigue test machine. Three MRE samples with iron particles mass fraction of 60%, 70%, and 80% were fabricated, and their properties dependence of three strain amplitudes （50%, 75%, and 100%） were measured. The absolute magnetorheological （MR） effect, storage modulus, and loss modulus of MRE samples after fatigue were evaluated by a modified dynamic mechanical analyzer. The results revealed that MR effect, storage modulus, and loss modulus of MREs containing 80% iron particles depended strongly on the strain amplitudes and the number of cycles, while storage mod-ulus and loss modulus of MREs containing 70% iron particles also depended on the strain amplitudes and the number of cycles but not as strongly as sample which contains 80% iron particles, but the properties of MREs containing 60% iron particles after cyclic deforma-tion were almost independent of the fatigued conditions. In order to investigate the fatigue mechanism of MREs, the sample was carried out with a quasi-static tensile testing and its surface morphology during testing was observed in situ by scanning electron microscopy.展开更多
A model to describe the hysteresis damper character of rubber material is presented in this paper. It consists of a parallel spring and damper, whose coefficients change with vibration frequencies. In order to acquire...A model to describe the hysteresis damper character of rubber material is presented in this paper. It consists of a parallel spring and damper, whose coefficients change with vibration frequencies. In order to acquire these relations, the force decomposition is carried out according to some sine vibration measurement data about nonlinear forces changing with deformations of the rubber material. The nonlinear force is decomposed into a spring force and a damper force, which are represented by a frcquency-dependent spring and damper coefficient, respectively. Repeating this step for different measurements will give different coefficients corresponding to different frequencies. Then, application of a parameter identification method will provide the requested functions over frequency. Using those formulae, as an example, the dynamic character of a hollow shaft system supported by rubber rings is analyzed and the acceleration response curve in the centroid position is calculated. Comparisons with sine vibration experiments of the real system show a maximal inaccuracy of 8. 8 %. Application of this model and procedure can simplify the modeling and analysis of mechanical systems including rubber materials.展开更多
The preparation of natural rubber based isotropic thick magnetorheological elastomers(MRE) was focused on by varying the percentage volume concentration of carbonyl iron powder and developing a test set up to test the...The preparation of natural rubber based isotropic thick magnetorheological elastomers(MRE) was focused on by varying the percentage volume concentration of carbonyl iron powder and developing a test set up to test the dynamic properties. Effect of magnetic field on the damping ratio was studied on the amplification region of the transmissibility curve. The viscoelastic dynamic damping nature of the elastomer was also studied by analyzing the force-displacement hysteresis graphs. The results show that MR effect increases with the increase in magnetic field as well as carbonyl iron powder particle concentration. It is observed that softer matrix material produces more MR effect. A maximum of 125% improvement in the loss factor is observed for the MRE with 25% carbonyl iron volume concentration. FEMM simulation shows that as carbonyl iron particle distribution becomes denser, MR effect is improved. FEMM analysis also reveals that if the distance between the adjacent iron particles are reduced from 20 μm to 10 μm, a 40% increase in stored energy is observed.展开更多
文摘Fatigue properties of magnetorheological elastomer （MRE） samples were investigated based on cis-polybutadiene rubber by using a fatigue test machine. Three MRE samples with iron particles mass fraction of 60%, 70%, and 80% were fabricated, and their properties dependence of three strain amplitudes （50%, 75%, and 100%） were measured. The absolute magnetorheological （MR） effect, storage modulus, and loss modulus of MRE samples after fatigue were evaluated by a modified dynamic mechanical analyzer. The results revealed that MR effect, storage modulus, and loss modulus of MREs containing 80% iron particles depended strongly on the strain amplitudes and the number of cycles, while storage mod-ulus and loss modulus of MREs containing 70% iron particles also depended on the strain amplitudes and the number of cycles but not as strongly as sample which contains 80% iron particles, but the properties of MREs containing 60% iron particles after cyclic deforma-tion were almost independent of the fatigued conditions. In order to investigate the fatigue mechanism of MREs, the sample was carried out with a quasi-static tensile testing and its surface morphology during testing was observed in situ by scanning electron microscopy.
文摘A model to describe the hysteresis damper character of rubber material is presented in this paper. It consists of a parallel spring and damper, whose coefficients change with vibration frequencies. In order to acquire these relations, the force decomposition is carried out according to some sine vibration measurement data about nonlinear forces changing with deformations of the rubber material. The nonlinear force is decomposed into a spring force and a damper force, which are represented by a frcquency-dependent spring and damper coefficient, respectively. Repeating this step for different measurements will give different coefficients corresponding to different frequencies. Then, application of a parameter identification method will provide the requested functions over frequency. Using those formulae, as an example, the dynamic character of a hollow shaft system supported by rubber rings is analyzed and the acceleration response curve in the centroid position is calculated. Comparisons with sine vibration experiments of the real system show a maximal inaccuracy of 8. 8 %. Application of this model and procedure can simplify the modeling and analysis of mechanical systems including rubber materials.
文摘The preparation of natural rubber based isotropic thick magnetorheological elastomers(MRE) was focused on by varying the percentage volume concentration of carbonyl iron powder and developing a test set up to test the dynamic properties. Effect of magnetic field on the damping ratio was studied on the amplification region of the transmissibility curve. The viscoelastic dynamic damping nature of the elastomer was also studied by analyzing the force-displacement hysteresis graphs. The results show that MR effect increases with the increase in magnetic field as well as carbonyl iron powder particle concentration. It is observed that softer matrix material produces more MR effect. A maximum of 125% improvement in the loss factor is observed for the MRE with 25% carbonyl iron volume concentration. FEMM simulation shows that as carbonyl iron particle distribution becomes denser, MR effect is improved. FEMM analysis also reveals that if the distance between the adjacent iron particles are reduced from 20 μm to 10 μm, a 40% increase in stored energy is observed.
