Gravitational field produced by high-power laser is calculated according to the linearized Einstein field equation in weak field approximation. Gravitational Faraday effect of electromagnetic wave propagating in the a...Gravitational field produced by high-power laser is calculated according to the linearized Einstein field equation in weak field approximation. Gravitational Faraday effect of electromagnetic wave propagating in the above gravitational field is studied and the rotation angle of polarization plane of electromagnetic wave is derived. The result is discussed and estimated under the condition of present experiment facility.展开更多
With brief statements of the linear electro-optical modulation and magnetooptical modulation, using the method of resultant of optical amplitude vectors and the methed of Jones matrix, formulas for intensity of transm...With brief statements of the linear electro-optical modulation and magnetooptical modulation, using the method of resultant of optical amplitude vectors and the methed of Jones matrix, formulas for intensity of transmitted light through the optical analyzer of various composition of electro-optical effect with magneto-optical effect are derived. The results show that the output beam from the analyzer carries information on current (or magnetic field), voltage (or electric field), active power and apparent power. When the light beam transmitted through the analyzer are transformed into electric signals, three kinds of information are included: the DC term corresponding to an active power, the term with frequency ω(50 Hz) corresponding to current or voltage, and the term with frequency 2ω(100 Hz) corresponding to an apparnt power.So, we can use the electric filter circuit to pick out the DC component for measuring active power; to pick out the component with frequency ω(50 Hz) for measuring current or voltage; and to pick out the component with frequency 2ω(100 Hz) for measuring apparent power. The paper discusses what quantities are measured when the analyzer is set on certain definite values, and ponts out the optimum selection for various measurements.展开更多
To solve the problems encountered in practical processes of magneto-optical sensing, the infinitesimal distributed-parameter model and finite-element accumulation of different dielectric properties of micromaterials w...To solve the problems encountered in practical processes of magneto-optical sensing, the infinitesimal distributed-parameter model and finite-element accumulation of different dielectric properties of micromaterials were used to describe the evolution of light polarization states, instead of the previously commonly used method of lumped-parameter simulation, thus essentially explaining the mechanism of sensing, magneto-optical effects, and related factors, and achieving multiphysics coupling using the COMSOL finite-element analysis method. Considering the cases of the Faraday effect without and with line birefringence, the magneto-optical effect and output characteristics of an infinitesimal magneto-optical sensor were simulated and studied. The results verified the effectiveness of the infinitesimal sensor model. Because the magnetic field, stress, and temperature changes alter the dielectric properties of magneto-optical materials, the finite-element accumulation method lays a good foundation for research on theoretical analysis and performance of magneto-optical sensors affected by factors such as the magnetic field, temperature, and stress.展开更多
文摘Gravitational field produced by high-power laser is calculated according to the linearized Einstein field equation in weak field approximation. Gravitational Faraday effect of electromagnetic wave propagating in the above gravitational field is studied and the rotation angle of polarization plane of electromagnetic wave is derived. The result is discussed and estimated under the condition of present experiment facility.
文摘With brief statements of the linear electro-optical modulation and magnetooptical modulation, using the method of resultant of optical amplitude vectors and the methed of Jones matrix, formulas for intensity of transmitted light through the optical analyzer of various composition of electro-optical effect with magneto-optical effect are derived. The results show that the output beam from the analyzer carries information on current (or magnetic field), voltage (or electric field), active power and apparent power. When the light beam transmitted through the analyzer are transformed into electric signals, three kinds of information are included: the DC term corresponding to an active power, the term with frequency ω(50 Hz) corresponding to current or voltage, and the term with frequency 2ω(100 Hz) corresponding to an apparnt power.So, we can use the electric filter circuit to pick out the DC component for measuring active power; to pick out the component with frequency ω(50 Hz) for measuring current or voltage; and to pick out the component with frequency 2ω(100 Hz) for measuring apparent power. The paper discusses what quantities are measured when the analyzer is set on certain definite values, and ponts out the optimum selection for various measurements.
基金supported by the National Natural Science Foundation of China(Grant No.51277066)
文摘To solve the problems encountered in practical processes of magneto-optical sensing, the infinitesimal distributed-parameter model and finite-element accumulation of different dielectric properties of micromaterials were used to describe the evolution of light polarization states, instead of the previously commonly used method of lumped-parameter simulation, thus essentially explaining the mechanism of sensing, magneto-optical effects, and related factors, and achieving multiphysics coupling using the COMSOL finite-element analysis method. Considering the cases of the Faraday effect without and with line birefringence, the magneto-optical effect and output characteristics of an infinitesimal magneto-optical sensor were simulated and studied. The results verified the effectiveness of the infinitesimal sensor model. Because the magnetic field, stress, and temperature changes alter the dielectric properties of magneto-optical materials, the finite-element accumulation method lays a good foundation for research on theoretical analysis and performance of magneto-optical sensors affected by factors such as the magnetic field, temperature, and stress.
