Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multipl...Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multiplying the mode functions of the circular waveguide andcircular groove waveguide on both sides of the boundary equation, the scattering matrix equation isobtained, the scattering coefficients can be obtained from the equation. Then the scatteringcharacteristics of the iris with circular window in circular groove waveguide are analyzed. At lastthe convergent problem is discussed; when choosing a suitable mode group, convergent numericalresults are obtained, and the frequency response of the iris' scattering coefficients is also given.展开更多
The tunneling spectroscopy and shot noise in ferromagnet/insulator/triplet-superconductor (FM/I/triplet- SC) structures are studied by taking into account the roughness interracial barrier and exchange splitting in th...The tunneling spectroscopy and shot noise in ferromagnet/insulator/triplet-superconductor (FM/I/triplet- SC) structures are studied by taking into account the roughness interracial barrier and exchange splitting in the FM. For the triplet-SG of Sr_2RuO_4,we consider two-dimensional f-wave order parameter symmetries having nodes within the RuO_2 plane,which reasonably describe both thermodynamic and thermal conductivity data.It is shown that the ferromagnetic exchange splitting gives rise to a decrease in the differential conductance,the average current,and the shot noise power,while the noise power-to-current ratio is increased;the interface roughness is found to lead to a decrease in the differential conductance and the average current,and an increase in the noise power-to-current ratio.展开更多
In this work propagation of anti-plane (SH) waves in two piezoelectric ceramic half-spaces with a thin layer of a semiconducting material between the half-spaces is studied, and wave attenuation and dispersion caused ...In this work propagation of anti-plane (SH) waves in two piezoelectric ceramic half-spaces with a thin layer of a semiconducting material between the half-spaces is studied, and wave attenuation and dispersion caused by semiconduction as well as wave amplification by a biasing electric field are examined. Key words Piezoelectricity - Semiconductor - Wave - Attenuation - Dispersion Document code A CLC number TH11展开更多
The structure of a high-speed maglev guideway is taken as the research object.With the aim of identifying the inconsistency of modal parameters between the simulation model and the actual model,and based on the 600 km...The structure of a high-speed maglev guideway is taken as the research object.With the aim of identifying the inconsistency of modal parameters between the simulation model and the actual model,and based on the 600 km/h high-speed maglev vehicle and the high-speed maglev test line,the arrangement of sensors and the vibration acceleration data collection of the 12.384 m concrete guideway were conducted.The modal parameters were identified from the guideway response signal using wavelet transform,after which the wavelet ridge was extracted by using the maximum slope method.Next,the vibration modes and frequency parameters of the interaction vibration characteristics of the high-speed maglev guideway and 600 km/h maglev vehicle were analyzed.The updating objective function for the finite element model of the guideway was established,and the initial guideway finite element model was modified and updated by repeatedly iterating the parameters.In doing so,the model structure of the high-speed maglev guideway was obtained,which is consistent with the actual structure.The accuracy of the updated guideway model in the calculation of the dynamic response was verified by combining this with the vehicle-guideway coupling dynamic model of the high-speed maglev system with 18 degrees of freedom.The research results reveal that the model update method based on the wavelet transform and the maximum slope method has the characteristics of high accuracy and fast recognition speed.This can effectively obtain an accurate guideway model that ensures the correctness of the vehicle-guideway coupling dynamic analysis and calculation while meeting the parameters of the measured structure model.This method is also suitable for updating other structural models of high-speed maglev systems.展开更多
In this paper, frequencies of electromagnetic wave in a conductive wire are investigated theoretically. The conductive wire has specific variable material properties along the length of itself. Furthermore, material p...In this paper, frequencies of electromagnetic wave in a conductive wire are investigated theoretically. The conductive wire has specific variable material properties along the length of itself. Furthermore, material properties varying along the length of the wire are determined according to a specific mathematical function. In addition, the central finite difference method is applied to the Maxwell equations. The accuracy of the mode 1 frequency parameter is obtained to be 0.06%. This result can be obtained by assuming the number of conductive wire nodes 20. The obtained results show a very good agreement with the exact solution results.展开更多
The structure of the optical waveguide of 2-bit electrooptic A/D converter with proton-exchange micro prisms is optimized by the finite-difference beam propagation method (FD-BPM). The electrode parameters of the conv...The structure of the optical waveguide of 2-bit electrooptic A/D converter with proton-exchange micro prisms is optimized by the finite-difference beam propagation method (FD-BPM). The electrode parameters of the converter are optimized by conformal mapping. The optimal parameters are a half-wave voltage of (Vπ= 4.5 V) and a bandwidth of (Δf=1.4 GHz).A normalized transmitted power of 69.75% is obtained by FD-BMP and the output waveguide gap is 300 μm.展开更多
Solving the Bogoliubov-de Gennes equation, the energy levels of bound statesare obtained in the ferromagnetic superconductor. The Josephson currents in a ferromagneticsuperconductor/Insulator/d-wave superconductor jun...Solving the Bogoliubov-de Gennes equation, the energy levels of bound statesare obtained in the ferromagnetic superconductor. The Josephson currents in a ferromagneticsuperconductor/Insulator/d-wave superconductor junction are calculated as a function of the exchangefield, temperature, and insulating barrier strength. It is found that the Josephson criticalcurrent is always suppressed by the presence of exchange Geld h and depends on crystalline axisorientation of d-wave superconductor.展开更多
In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve t...In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve the iterative convergence. And the matrix equations are solved using the multifrontal algorithm. The resulting CPU time is greatly reduced.Finally, a number of numerical examples are given to illustrate its accuracy and efficiency.展开更多
Using Schroedinger-Maxwell formalism, we propose and analyze an opticalfour-wave mixing (FWM) scheme for the generation of coherent light in a coherent six-level atomicmedium based on dual electromagnetically induced ...Using Schroedinger-Maxwell formalism, we propose and analyze an opticalfour-wave mixing (FWM) scheme for the generation of coherent light in a coherent six-level atomicmedium based on dual electromagnetically induced transparency (EIT). We show that the significantlyenhanced conversion efficiency enabled by ultraslow propagation of pump waves has no directrelationship with the single-photon detuning, which is different from the FWM with a single EIT. Themost important feature is that our scheme is also capable of inhibiting and delaying the onset ofthe detrimental three-photon destructive interference that looks like a recent scheme [Phys. Rev.Lett. 91 (2003) 243902] and may be used for generating short-wave-length coherent radiation.展开更多
Optimal parameters for depositing Titanium nitride （TIN） thin films by DC reactive magnetron sputtering were determined. TiN thin films were deposited on Si （100） substrates by DC reactive magnetron sputtering, at...Optimal parameters for depositing Titanium nitride （TIN） thin films by DC reactive magnetron sputtering were determined. TiN thin films were deposited on Si （100） substrates by DC reactive magnetron sputtering, at different temperatures, different electrical current values, and different N2/Ar ratios. Structural characteristics of TiN thin films were measured by X-ray diffraction （XRD）; surface morphology of the thin films was characterized using an atomic force microscope （AFM）. The electric resistivity of the TiN films was measured by a four-point probe. In the result, temperature is 500℃, electrical current value is 1.6 A, pure N2 is the reacting gas, TiN thin film has the preferred （200） orientation, resistance is small enough for its use as bottom electrodes.展开更多
The Josephson currents in s-wave superconductor/ferromagnet insulator/p-wave superconductor（s/FI/p） junctions are calculated as a function of temperature and the phase taking into account the roughness scattering ef...The Josephson currents in s-wave superconductor/ferromagnet insulator/p-wave superconductor（s/FI/p） junctions are calculated as a function of temperature and the phase taking into account the roughness scattering effect at interface. The phase dependence of the Josephson current I （φ） between s-wave and px-wave superconductor is predicted to be sin（2φ）. The ferromagnet scattering effect, the barrier strength, and the roughness strength at interface suppress the dc currents in s/FI/p junction.展开更多
Higher-order Time Domain Finite Element Method (TDFEM) based on the nodal inter- polation is proposed for two-dimensional electromagnetic analysis. The detailed algorithms of the method are presented firstly, and then...Higher-order Time Domain Finite Element Method (TDFEM) based on the nodal inter- polation is proposed for two-dimensional electromagnetic analysis. The detailed algorithms of the method are presented firstly, and then the accuracy, CPU time and memory consumption of the higher-order node-based TDFEM are investigated. The high performance of the presented approach is validated by numerical results of the transient responses of Transverse Electric (TE) field and Transverse Magnetic (TM) field in a rectangular waveguide.展开更多
In this paper, we propose and analyze an optical multi-wave mixing scheme for the generation of coherent light in a five-level atomic system in the context of electromagnetically induced transparency. A detailed semic...In this paper, we propose and analyze an optical multi-wave mixing scheme for the generation of coherent light in a five-level atomic system in the context of electromagnetically induced transparency. A detailed semiclassical study of the propagation of generated mixing and probe fields is demonstrated. The analytical dependence of the generated mixing field on the probe field and the respective detuning is predicted. Such a nonlinear optical process can be used for generating short-wavelength radiation at low pump intensities.展开更多
We have demonstrated the Autler-Townes (AT) splitting of the four-wave mixing (FWM) process and the six-wave mixing (SWM) process in an elec tromag netically induced transparency (EIT) window in five-level atomic vapo...We have demonstrated the Autler-Townes (AT) splitting of the four-wave mixing (FWM) process and the six-wave mixing (SWM) process in an elec tromag netically induced transparency (EIT) window in five-level atomic vapor of 87 Rb. Moreover we discuss interactions of multi-dressed states. The experimental results agree well with the theoretical analysis.展开更多
A new ultrasonic transducer with multi-belts coil for generating and receiving longitudinal guided wave in ferromagnetic material pipes is proposed.The theory backgrounds and transduction principle of the proposed tra...A new ultrasonic transducer with multi-belts coil for generating and receiving longitudinal guided wave in ferromagnetic material pipes is proposed.The theory backgrounds and transduction principle of the proposed transducer are presented and ana- lyzed.To verify the performance of the transducer,several experiments are performed.The performance of inspecting crack, frequency-tuned characteristic,effect of bias static magnetic field and dynamic magnetic field,lift-off effect and effect of the period number of the exciting current are investigated.The results show that the proposed coils not only could tune the center frequency but also could improve the amplitude and signal-to-noise(SNR)of the detected signals.Bias static magnetic field and dynamic magnetic field are two important factors influencing the amplitude of the longitudinal guided wave.The amplitude of the longitudinal guided wave is exponentially decreased versus the lift-off distance of the transmitter and receiver.Period number of excitation signal could influence the amplitude and wave width of the ultrasonic wave.The proposed transducer could easily control the wave modes and would be a better choice for pipes’monitoring and inspection compared to traditional single-belt coil transducer.展开更多
Microwave permeability spectra of single Co nanotube under equilibrium state have been studied by micromagnetics simulation.More than four obvious resonance peaks have been found(11.72,24.20,33.18 and 39.55 GHz).Such ...Microwave permeability spectra of single Co nanotube under equilibrium state have been studied by micromagnetics simulation.More than four obvious resonance peaks have been found(11.72,24.20,33.18 and 39.55 GHz).Such large resonance frequency cannot be found in other traditional magnetic materials.The configurations of magnetic moments along the nanotube have been simulated.The results show that the top end of nanotube has a"flow-out"pattern of magnetic moments configuration.The bottom end has a"flow-in"pattern of magnetic moments configuration.The magnetic moments within the main body of nanotube are aligned perfectly along the length of nanotube.The magnitude of natural resonance peak is strongly related to the volume fraction of a zone,which has the same orientation of magnetic moments.Large microwave permeability values have been found for single nanotube.The generalized Snoek’s law has been used to validate the micromagnetics simulations in this paper.展开更多
文摘Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multiplying the mode functions of the circular waveguide andcircular groove waveguide on both sides of the boundary equation, the scattering matrix equation isobtained, the scattering coefficients can be obtained from the equation. Then the scatteringcharacteristics of the iris with circular window in circular groove waveguide are analyzed. At lastthe convergent problem is discussed; when choosing a suitable mode group, convergent numericalresults are obtained, and the frequency response of the iris' scattering coefficients is also given.
文摘The tunneling spectroscopy and shot noise in ferromagnet/insulator/triplet-superconductor (FM/I/triplet- SC) structures are studied by taking into account the roughness interracial barrier and exchange splitting in the FM. For the triplet-SG of Sr_2RuO_4,we consider two-dimensional f-wave order parameter symmetries having nodes within the RuO_2 plane,which reasonably describe both thermodynamic and thermal conductivity data.It is shown that the ferromagnetic exchange splitting gives rise to a decrease in the differential conductance,the average current,and the shot noise power,while the noise power-to-current ratio is increased;the interface roughness is found to lead to a decrease in the differential conductance and the average current,and an increase in the noise power-to-current ratio.
文摘In this work propagation of anti-plane (SH) waves in two piezoelectric ceramic half-spaces with a thin layer of a semiconducting material between the half-spaces is studied, and wave attenuation and dispersion caused by semiconduction as well as wave amplification by a biasing electric field are examined. Key words Piezoelectricity - Semiconductor - Wave - Attenuation - Dispersion Document code A CLC number TH11
基金The National 13th Five-Year Science and Technology Support Program of China(No.2016YFB1200602).
文摘The structure of a high-speed maglev guideway is taken as the research object.With the aim of identifying the inconsistency of modal parameters between the simulation model and the actual model,and based on the 600 km/h high-speed maglev vehicle and the high-speed maglev test line,the arrangement of sensors and the vibration acceleration data collection of the 12.384 m concrete guideway were conducted.The modal parameters were identified from the guideway response signal using wavelet transform,after which the wavelet ridge was extracted by using the maximum slope method.Next,the vibration modes and frequency parameters of the interaction vibration characteristics of the high-speed maglev guideway and 600 km/h maglev vehicle were analyzed.The updating objective function for the finite element model of the guideway was established,and the initial guideway finite element model was modified and updated by repeatedly iterating the parameters.In doing so,the model structure of the high-speed maglev guideway was obtained,which is consistent with the actual structure.The accuracy of the updated guideway model in the calculation of the dynamic response was verified by combining this with the vehicle-guideway coupling dynamic model of the high-speed maglev system with 18 degrees of freedom.The research results reveal that the model update method based on the wavelet transform and the maximum slope method has the characteristics of high accuracy and fast recognition speed.This can effectively obtain an accurate guideway model that ensures the correctness of the vehicle-guideway coupling dynamic analysis and calculation while meeting the parameters of the measured structure model.This method is also suitable for updating other structural models of high-speed maglev systems.
文摘In this paper, frequencies of electromagnetic wave in a conductive wire are investigated theoretically. The conductive wire has specific variable material properties along the length of itself. Furthermore, material properties varying along the length of the wire are determined according to a specific mathematical function. In addition, the central finite difference method is applied to the Maxwell equations. The accuracy of the mode 1 frequency parameter is obtained to be 0.06%. This result can be obtained by assuming the number of conductive wire nodes 20. The obtained results show a very good agreement with the exact solution results.
文摘The structure of the optical waveguide of 2-bit electrooptic A/D converter with proton-exchange micro prisms is optimized by the finite-difference beam propagation method (FD-BPM). The electrode parameters of the converter are optimized by conformal mapping. The optimal parameters are a half-wave voltage of (Vπ= 4.5 V) and a bandwidth of (Δf=1.4 GHz).A normalized transmitted power of 69.75% is obtained by FD-BMP and the output waveguide gap is 300 μm.
文摘Solving the Bogoliubov-de Gennes equation, the energy levels of bound statesare obtained in the ferromagnetic superconductor. The Josephson currents in a ferromagneticsuperconductor/Insulator/d-wave superconductor junction are calculated as a function of the exchangefield, temperature, and insulating barrier strength. It is found that the Josephson criticalcurrent is always suppressed by the presence of exchange Geld h and depends on crystalline axisorientation of d-wave superconductor.
文摘In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve the iterative convergence. And the matrix equations are solved using the multifrontal algorithm. The resulting CPU time is greatly reduced.Finally, a number of numerical examples are given to illustrate its accuracy and efficiency.
文摘Using Schroedinger-Maxwell formalism, we propose and analyze an opticalfour-wave mixing (FWM) scheme for the generation of coherent light in a coherent six-level atomicmedium based on dual electromagnetically induced transparency (EIT). We show that the significantlyenhanced conversion efficiency enabled by ultraslow propagation of pump waves has no directrelationship with the single-photon detuning, which is different from the FWM with a single EIT. Themost important feature is that our scheme is also capable of inhibiting and delaying the onset ofthe detrimental three-photon destructive interference that looks like a recent scheme [Phys. Rev.Lett. 91 (2003) 243902] and may be used for generating short-wave-length coherent radiation.
基金Project supported by the National Natural Science Foundation of China (No. 60478039) and the Natural Science Foundation of Zheji-ang Province (No. X405002), China
文摘Optimal parameters for depositing Titanium nitride （TIN） thin films by DC reactive magnetron sputtering were determined. TiN thin films were deposited on Si （100） substrates by DC reactive magnetron sputtering, at different temperatures, different electrical current values, and different N2/Ar ratios. Structural characteristics of TiN thin films were measured by X-ray diffraction （XRD）; surface morphology of the thin films was characterized using an atomic force microscope （AFM）. The electric resistivity of the TiN films was measured by a four-point probe. In the result, temperature is 500℃, electrical current value is 1.6 A, pure N2 is the reacting gas, TiN thin film has the preferred （200） orientation, resistance is small enough for its use as bottom electrodes.
基金The project supported by the Natural Science Foundation of the Education Commission 0f Jiangsu Province of China under Grant No. 06KJB140009
文摘The Josephson currents in s-wave superconductor/ferromagnet insulator/p-wave superconductor（s/FI/p） junctions are calculated as a function of temperature and the phase taking into account the roughness scattering effect at interface. The phase dependence of the Josephson current I （φ） between s-wave and px-wave superconductor is predicted to be sin（2φ）. The ferromagnet scattering effect, the barrier strength, and the roughness strength at interface suppress the dc currents in s/FI/p junction.
基金Supported by National Natural Science Foundation of China (No. 60601024)
文摘Higher-order Time Domain Finite Element Method (TDFEM) based on the nodal inter- polation is proposed for two-dimensional electromagnetic analysis. The detailed algorithms of the method are presented firstly, and then the accuracy, CPU time and memory consumption of the higher-order node-based TDFEM are investigated. The high performance of the presented approach is validated by numerical results of the transient responses of Transverse Electric (TE) field and Transverse Magnetic (TM) field in a rectangular waveguide.
基金The project supported by National Fundamental Research Program of China under Grant No.2001CB309310National Natural Science Foundation of China under Grant Nos.90103026,10125419,and 10121503
文摘In this paper, we propose and analyze an optical multi-wave mixing scheme for the generation of coherent light in a five-level atomic system in the context of electromagnetically induced transparency. A detailed semiclassical study of the propagation of generated mixing and probe fields is demonstrated. The analytical dependence of the generated mixing field on the probe field and the respective detuning is predicted. Such a nonlinear optical process can be used for generating short-wavelength radiation at low pump intensities.
文摘We have demonstrated the Autler-Townes (AT) splitting of the four-wave mixing (FWM) process and the six-wave mixing (SWM) process in an elec tromag netically induced transparency (EIT) window in five-level atomic vapor of 87 Rb. Moreover we discuss interactions of multi-dressed states. The experimental results agree well with the theoretical analysis.
基金supported by the National Natural Science Foundation of China(Grant No.10974115)
文摘A new ultrasonic transducer with multi-belts coil for generating and receiving longitudinal guided wave in ferromagnetic material pipes is proposed.The theory backgrounds and transduction principle of the proposed transducer are presented and ana- lyzed.To verify the performance of the transducer,several experiments are performed.The performance of inspecting crack, frequency-tuned characteristic,effect of bias static magnetic field and dynamic magnetic field,lift-off effect and effect of the period number of the exciting current are investigated.The results show that the proposed coils not only could tune the center frequency but also could improve the amplitude and signal-to-noise(SNR)of the detected signals.Bias static magnetic field and dynamic magnetic field are two important factors influencing the amplitude of the longitudinal guided wave.The amplitude of the longitudinal guided wave is exponentially decreased versus the lift-off distance of the transmitter and receiver.Period number of excitation signal could influence the amplitude and wave width of the ultrasonic wave.The proposed transducer could easily control the wave modes and would be a better choice for pipes’monitoring and inspection compared to traditional single-belt coil transducer.
基金supported by the National Natural Science Foundation of China(Grant No.61271039)the Scientific Foundation of Young Scientists of Sichuan Province(Grant No.2012JQ0053)the Program for New Century Excellent Talents in Universities(NCET-11-0060)
文摘Microwave permeability spectra of single Co nanotube under equilibrium state have been studied by micromagnetics simulation.More than four obvious resonance peaks have been found(11.72,24.20,33.18 and 39.55 GHz).Such large resonance frequency cannot be found in other traditional magnetic materials.The configurations of magnetic moments along the nanotube have been simulated.The results show that the top end of nanotube has a"flow-out"pattern of magnetic moments configuration.The bottom end has a"flow-in"pattern of magnetic moments configuration.The magnetic moments within the main body of nanotube are aligned perfectly along the length of nanotube.The magnitude of natural resonance peak is strongly related to the volume fraction of a zone,which has the same orientation of magnetic moments.Large microwave permeability values have been found for single nanotube.The generalized Snoek’s law has been used to validate the micromagnetics simulations in this paper.
