国内首台多路并联超高功率脉冲装置"聚龙一号"(PTS)已被用于磁驱动准等熵实验研究,其分时分组放电特点为开展材料的动高压可控路径加载研究提供了便利.磁驱动准等熵实验的物理设计和结果分析需要依赖可靠的数值模拟平台.本文...国内首台多路并联超高功率脉冲装置"聚龙一号"(PTS)已被用于磁驱动准等熵实验研究,其分时分组放电特点为开展材料的动高压可控路径加载研究提供了便利.磁驱动准等熵实验的物理设计和结果分析需要依赖可靠的数值模拟平台.本文介绍了含强度计算的一维磁流体力学程序MADE1D的物理模型和程序特点,讨论了"聚龙一号"装置两种不同电流波形驱动条件下准等熵实验的模拟情况.结果显示,MADE1D程序能够较好地反映电磁力引起的压缩波在样品内部的产生、传播及发展过程,计算获得的"样品/窗口"界面速度同实验测量结果符合较好.分析发现,电流波形是影响加载过程的重要因素.对于目前使用的带状电极,电流上升率不宜超过40 k A/ns,否则可能在厚度1.2 mm以上的铝样品中产生冲击.展开更多
地球极尖区是太阳风等离子体进入内磁层和电离层的一个重要“窗口”,但其总体结构长期以来尚未确定.2008年3月8日两个连续亚暴期间,太阳风的整体变化范围较大,基于全球三维数值模拟我们建立了一个由行星际磁场(interplanetary magnetic ...地球极尖区是太阳风等离子体进入内磁层和电离层的一个重要“窗口”,但其总体结构长期以来尚未确定.2008年3月8日两个连续亚暴期间,太阳风的整体变化范围较大,基于全球三维数值模拟我们建立了一个由行星际磁场(interplanetary magnetic field,IMF)B_(Y)、B_(Z)控制的低高度(1.1个地球半径高度)极尖区的预报模式.该模式由椭圆函数构造而成,拟合函数由极尖区位置和宽度控制并取决于IMF B_(Y)和B_(Z).极尖区地磁纬度(geomagnetic latitude,MLAT)随着向北IMF B_(Z)的增加而增加,随着向南IMF B_(Z)的增加而明显降低.当B_(Y)=0时,磁地方时(magnetic local time,MLT)接近12,当IMF为东向(西向)时,极尖区中心将位于北半球下午(上午)侧.MLAT宽度随IMF B_(Z)从北转南而减小,MLT宽度随IMF B_(Z)从北转南而增大.通过与DMSP卫星观测结果的比较分析,验证了该模型的有效性.基于低高度极尖区预报模式,将进一步建立极尖区三维预报模式,这将有助于空间天气预报.展开更多
Explosive events have been observed to occur consecutively in bursts at intermittent locations along theboundary near the opposite polarity. The aim of the present paper is to explore a possible mechanism to interpret...Explosive events have been observed to occur consecutively in bursts at intermittent locations along theboundary near the opposite polarity. The aim of the present paper is to explore a possible mechanism to interpret thisburst-like characteristic of explosive events. The 2D magnetohydrodynamic (MHD) numerical simulations with resistivityhave been carried out to reproduce the intermittent spatial-temporal magnetic reconnection events taking place along thelong, compressible current sheet. The observed density enhancements in previously published results have been verifiedto be associated to magnetic reconnection sites. Late observational evidences, which support present attempts, have alsobeen found, at least in morphological evolution of the consecutive explosive events.展开更多
In this work, a numerical study for designing a new kind of MHD （Magneto-Hydrn-Dynamic） pumps is presented. This technique makes a compromise between electrolysis prevention and high flow rate performance. This tech...In this work, a numerical study for designing a new kind of MHD （Magneto-Hydrn-Dynamic） pumps is presented. This technique makes a compromise between electrolysis prevention and high flow rate performance. This technique should eliminate electrolytic bubble generation, electrodes wear and fluid propriety modification. All these side phenomena are prevented by considering isolated electrodes. The numerical presented results in this paper demonstrate that continuous MHD pumping is possible with isolated electrodes. The MHD excitation combines a high frequency altering current with a low frequency altering magnetic field. In order to validate our results, two independent theoretical methods for computing flow rate are followed. The two presented independent approaches show that high flow rate is possible even with isolated electrodes. To overcome the problem of dimensioning this kind of pumps, a generic numerical analysis is proposed. Hence, the pump performances as functions of the external parameter are studied and tools to calculate for a given fluid and the optimal high frequency regime are provided.展开更多
文摘国内首台多路并联超高功率脉冲装置"聚龙一号"(PTS)已被用于磁驱动准等熵实验研究,其分时分组放电特点为开展材料的动高压可控路径加载研究提供了便利.磁驱动准等熵实验的物理设计和结果分析需要依赖可靠的数值模拟平台.本文介绍了含强度计算的一维磁流体力学程序MADE1D的物理模型和程序特点,讨论了"聚龙一号"装置两种不同电流波形驱动条件下准等熵实验的模拟情况.结果显示,MADE1D程序能够较好地反映电磁力引起的压缩波在样品内部的产生、传播及发展过程,计算获得的"样品/窗口"界面速度同实验测量结果符合较好.分析发现,电流波形是影响加载过程的重要因素.对于目前使用的带状电极,电流上升率不宜超过40 k A/ns,否则可能在厚度1.2 mm以上的铝样品中产生冲击.
基金The project supported by National Natural Science Foundation of China under Grant Nos.40104006,40204010,40374056,and 40336053
文摘Explosive events have been observed to occur consecutively in bursts at intermittent locations along theboundary near the opposite polarity. The aim of the present paper is to explore a possible mechanism to interpret thisburst-like characteristic of explosive events. The 2D magnetohydrodynamic (MHD) numerical simulations with resistivityhave been carried out to reproduce the intermittent spatial-temporal magnetic reconnection events taking place along thelong, compressible current sheet. The observed density enhancements in previously published results have been verifiedto be associated to magnetic reconnection sites. Late observational evidences, which support present attempts, have alsobeen found, at least in morphological evolution of the consecutive explosive events.
文摘In this work, a numerical study for designing a new kind of MHD （Magneto-Hydrn-Dynamic） pumps is presented. This technique makes a compromise between electrolysis prevention and high flow rate performance. This technique should eliminate electrolytic bubble generation, electrodes wear and fluid propriety modification. All these side phenomena are prevented by considering isolated electrodes. The numerical presented results in this paper demonstrate that continuous MHD pumping is possible with isolated electrodes. The MHD excitation combines a high frequency altering current with a low frequency altering magnetic field. In order to validate our results, two independent theoretical methods for computing flow rate are followed. The two presented independent approaches show that high flow rate is possible even with isolated electrodes. To overcome the problem of dimensioning this kind of pumps, a generic numerical analysis is proposed. Hence, the pump performances as functions of the external parameter are studied and tools to calculate for a given fluid and the optimal high frequency regime are provided.
