“一带一路”背景下新型经济磁能发电机的设计研究

绿色经济的发展是当前世界各国所关心的核心话题之一,其关键问题在于新型能源的设计利用。我国提出"一带一路"建设以来,如何建设绿色环保的"新丝绸之路"成为我们致力于解决的问题。中国作为世界稀土储量第一大国,稀土磁能发电潜力极大。本文根据稀土磁能性质,设计了一种高效经济的稀土磁能发电机,为"一带一路"沿线国家的绿色能源经济发展提供了新参考。

Variable damping forces caused by electromagnetic energy harvesting with an adjustable load

A novel variable damper using an adjustable energy harvesting structure is proposed for semi-active vibration systems. The fluid flowing in a hydraulic cylinder is employed to drive an electromagnetic generator for harvesting vibration energy, which on the other hand, leads to a damping effect of the hydraulic damper. To make the damping force variable, an adjustable resistor is adopted to tune the capability of energy harvesting. The present approach is validated by both theoretical analysis and experimental evaluation. When connected with different resistance loads, the prototype damper has different equivalent damping coefficients ranging from 3. 987 × 104 to 2. 488 × 105 N· s/m. The results show that the damping force of the damper is variable in response to the adjustable load for the vibration energy harvesting.

Comparative Performance of Fixed-Speed and Variable-Speed Wind Turbine Generator Systems

In the early development of the wind energy, the majority of the wind turbines have been operated at constant speed. Subsequently, the number of variable-speed wind turbines installed in wind farms has increased. In this paper, a comparative performance of fixed and variable speed wind generators with Pitch angle control has been presented. The first is based on a squirrel cage Induction Generator （IG） of 315 kW rated power, connected directly to the grid. The second incorporated a Permanent Magnet Synchronous Generator （PMSG） of 750 kW rated power. The performances of each studied wind generator are evaluated by simulation works and variable speed operation is highlighted as preferred mode of operation.

MPPT for Hybrid Energy System Using Gradient Approximation and Matlab Simulink Approach

This paper applies new maximum-power-point tracking （MPPT） algorithm to a hybrid renewable energy system that combines both Wind-Turbine Generator （WTG） and Solar Photovoltaic （PV） Module （SPVM）. In this paper, the WTG is a direct-drive system and includes wind turbine, three-phase permanent magnet synchronous generator, three-phase full bridge rectifier, and buck-bust converter, while the SPVM consist of solar PV modules, buck converter, maximum power tracking system for both systems, and load. Several methods are applied to obtain maximum performances, the appropriate and most effective method is called gradient-approximation method for WTG approach, because it enables the generator to operate at variable wind speeds. Furthermore MPPT also is used to optimized the achieved energy generated by solar PV modules.Matlab / Simulink approach is used to simulate, discuss, and optimized the generated power by varying the duty cycle of the converters, and tip speed ratio of the WTG system.

Hybrid electromagnetic-triboelectric nanogenerator for harvesting vibration energy

We report a hybrid nanogenerator that includes a triboelectric nanogenerator （TENG） and an electromagnetic generator （EMG） for scavenging mechanical energy. This nanogenerator operates in a hybrid mode using both the triboelectric and electromagnetic induction effects. Under a vibration frequency of 14 Hz, the fabricated TENG can deliver an open-circuit voltage of about 84 V, a short-circuit current of 43 μA, and a maximum power of 1.2 mW （the corresponding power per unit mass and volume are 1.82 mW/g and 3.4 W/m^3, respectively） under a loading resistance of 2 MΩ, whereas the fabricated EMG can produce an opencircuit voltage of about 9.9 V, a short-circuit current of 7 mA, and a maximum power of 17.4 mW （the corresponding power per unit mass and volume are 0.53 mW/g and 3.7 W/m^3, respectively） under a loading resistance of 2 kΩ. Impedance matching between the TENG and EMG can be achieved using a transformer to decrease the impedance of the TENG. Moreover, the energy produced by the hybrid nanogenerator can be stored in a home-made Li-ion battery. This research represents important progress toward practical applications of vibration energy generation for realizing self-charging power cells.

Performance calculation and improved model research of direct-drive permanent magnet generator based on FEM

In some control strategies of the direct-rive permanent magnet generator(DDPMG),the mathematics model is excessively simplified and some complex nonlinear characteristics,such as core saturation and cross-saturation,are generally neglected.To solve this problem,this paper utilizes the frozen element permeability method to compute the armature self-and mutual-inductance,permanent magnet d-and q-axis flux varying with d-axis and q-axis current,then an improved model is presented in which the core saturation and cross-saturation between d-axis and q-axis are considered effectively.Based on this model,the method for computing the performance of the generators is also proposed.Taking a 1.5-MW DDPMG as an example,the time-stepping finite element method(T-S FEM) is adopted to analyze the performance with no-load and loaded conditions,the results show a good agreement with the ones obtained by the improved model.Compared with the simplified model,it is demonstrated that the presented model has the high efficiency and reliability and can provide a good reference for optimization design of DDPMG and other PM motors.

Theoretical Investigation of Operation Modes of MHD Generators for Energy-bypass Engines

A MHD generator with different arrangements of electromagnetic fields will lead the generator working in three modes.A quasi-one-dimensional approximation is used for the model of the MHD generator to analyze the inner mechanism of operation modes.For the MHD generator with a uniform constant magnetic field,a specific critical electric field E_(cr) is required to decelerate a supersonic entrance flow into a subsonic exit flow.Otherwise,the generator works in a steady mode with a larger electric field than E_(cr) in which a steady supersonic flow is provided at the exit,or the generator works in a choked mode with a smaller electric field than E_(cr) in which the supersonic entrance flow is choked in the channel.The detailed flow field characteristics in different operation modes are discussed,demonstrating the relationship of operation modes with electromagnetic fields.