The Qilian Orogenic belt is one of the typical orogenic belts globally and a natural laboratory for studying plate tectonics.Many researchers have studied the ophiolite and high pressure and ultra-high pressure metamo...The Qilian Orogenic belt is one of the typical orogenic belts globally and a natural laboratory for studying plate tectonics.Many researchers have studied the ophiolite and high pressure and ultra-high pressure metamorphic rocks in the Qilian orogen and obtained valuable achievements.However,a hot debate exists on the basement property,the distribution of ophiolite,and the boundaries of tectonic units.Large-scale high-precision aeromagnetic surveys have recently been conducted in the Qilian Orogenic belt and adjacent areas.In this study,we are trying to analysis the tectonic framework of the Qilian Orogen using 1:500,000 aeromagnetic data.The results provide geophysical perspectives for studying the structural framework and deformation of this area.According to the aeromagnetic∆T anomaly map,the central and Southern Qilian have the same magnetic anomaly feature that noticeably differs from the North Qilian Orogenic belt and the Qaidam Block.This result indicates that the central and Southern Qilian have a unified magnetic basement and differ from the North Qilian orogenic belt and Qaidam Block.The map shows the distribution of ophiolite in the North Qilian orogenic belt.Linear magnetic anomalies represent the ophiolites because the mafic–ultramafic rocks usually have high magnetic susceptibility.The ophiolite belts are continuously distributed in the western part of North Qilian orogenic belt and have a large scale.However,the scale of the ophiolite belt and the outcropping of mafic–ultramafic rocks reduces when they pass through Qilian County to the east.The results indicate differences in the evolution process between the eastern and western parts of North Qilian,with Qilian County as the transition zone.This study also systematically defines the geophysical boundaries of the Qaidam Block,Qilian Block,North Qilian Orogenic belt,and Alxa block.It is proposed that the sinistral displacement of the Altun Fault is adjusted and absorbed by the series of NE-trending faults in the Qilian orogen and merge into the Longshoushan–Gushi Fault.The extension of the North Qilian Orogenic belt is strengthened by the neotectonics movement along the shearing direction,which separated the North Qilian Orogenic belt into several segments and formed a series of northeast-trending faults.展开更多
To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the con...To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the conventional electromagnetic method in exploration depth,precision,and accuracy,the large-depth and high-precision wide field electromagnetic method is applied to the complex structure test area of the Luochang syncline and Yuhe nose anticline in the southern Sichuan.The advantages of the wide field electromagnetic method in detecting deep,low-resistivity thin layers are demonstrated.First,on the basis of the analysis of physical property data,a geological–geoelectric model is established in the test area,and the wide field electromagnetic method is numerically simulated to analyze and evaluate the response characteristics of deep thin shale gas layers on wide field electromagnetic curves.Second,a wide field electromagnetic test is conducted in the complex structure area of southern Sichuan.After data processing and inversion imaging,apparent resistivity logging data are used for calibration to develop an apparent resistivity interpretation model suitable for the test area.On the basis of the results,the characteristics of the electrical structure change in the shallow longitudinal formation of 6 km are implemented,and the transverse electrical distribution characteristics of the deep shale gas layer are delineated.In the prediction area near the well,the subsequent data verification shows that the apparent resistivity obtained using the inversion of the wide field electromagnetic method is consistent with the trend of apparent resistivity revealed by logging,which proves that this method can effectively identify the weak response characteristics of deep shale gas formations in complex structural areas.This experiment,it is shown shows that the wide field electromagnetic method with a large depth and high precision can effectively characterize the electrical characteristics of deep,low-resistivity thin layers in complex structural areas,and a new set of low-cost evaluation technologies for shale gas target layers based on the wide field electromagnetic method is explored.展开更多
Heat transfer behaviors of AZ80?1%Y alloy during low frequency electromagnetic casting (LFEC) and direct chilling casting were studied by in-situ temperature measurement. The results demonstrated that the low frequenc...Heat transfer behaviors of AZ80?1%Y alloy during low frequency electromagnetic casting (LFEC) and direct chilling casting were studied by in-situ temperature measurement. The results demonstrated that the low frequency electromagnetic field (EM) caused forced convection in the melt during LFEC. The forced convection led to uniform solidification velocity and temperature field. EM frequency, excitation current intensity and casting temperature could control the heat transfer behavior. The forced convection could improve the microstructure and degrade the difference in microstructure between the edge and center of billet. Appropriate parameters of low frequency EM for casting Mg alloy are 20 Hz of frequency and 60 A of electric current intensity.展开更多
The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys (x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%), produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and agin...The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys (x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%), produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and aging treatment. The effects of minor Sc and Zr addition on microstructure, recrystallization and properties of alloys were studied by optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that Sc and Zr addition can refine grains of the as-cast alloy by precipitation of primary Al3(Sc,Zr) particles formed during solidification as heterogeneous nuclei. Secondary Al3(Sc,Zr) precipitates formed during homogenization treatment strongly pin the movement of dislocation and subgrain boundaries, which can effectively inhibit the alloys recrystallization. Compared with the alloy without Sc and Zr addition, the Al-Zn-Mg-Cu-Zr alloy with 0.05%Sc and 0.15%Zr shows the increase in tensile strength and yield strength by 172 MPa and 218 MPa, respectively. Strengthening comes from the contributions of precipitation, substructure and grain refining.展开更多
Low frequency electromagnetic casting (LFEC) process with the application of an induction coil outside the conventional direct chill (DC) casting mould was used to prepare the flat ingot of 2524 alloy and the effe...Low frequency electromagnetic casting (LFEC) process with the application of an induction coil outside the conventional direct chill (DC) casting mould was used to prepare the flat ingot of 2524 alloy and the effect of electromagnetic field on the microstructure and macrosegregation of this alloy was systematically studied. The results show that the fiat ingot prepared by the LFEC process has a finer and more uniform as-cast microstructure and the grain morphology is transformed from dendrite and rosette-like to equiaxed structure. The LFEC process also shows a significant effect on macrosegregation, and with the application of electromagnetic field during casting process, the segregation in the centre of the ingot is obviously reduced. The mechanism of these effects was also discussed.展开更多
The effects of low frequency electromagnetic field on the macro-physical fields in the semi-continuous casting process of aluminum alloys and the microstructure and crack in the billets were studied and analyzed by th...The effects of low frequency electromagnetic field on the macro-physical fields in the semi-continuous casting process of aluminum alloys and the microstructure and crack in the billets were studied and analyzed by the numerical and experimental methods.Comparison of the results for the macro-physical fields in the low frequency electromagnetic casting(LFEC) process with the conventional DC casting process indicates the following characters due to the application of electromagnetic field:an entirely changed direction and remarkably increased velocity of melt flow;a uniform distribution and a decreased gradient of temperature;elevated isothermal lines;a reduced sump depth;decreased stress and plastic deformation.Further,the microstructure of the billets is refined remarkably and the crack in the billets is eliminated in LFEC process because of modification of the macro-physical fields induced by the application of low frequency electromagnetic field.展开更多
The effects of a low-voltage pulsed magnetic field on the solidified structure and mechanical properties of DC casting AZ80 magnesium alloy were investigated.The results showed that the solidified structure of the DC ...The effects of a low-voltage pulsed magnetic field on the solidified structure and mechanical properties of DC casting AZ80 magnesium alloy were investigated.The results showed that the solidified structure of the DC casting AZ80 magnesium alloy was refined obviously by the low-voltage pulsed magnetic field and significant grain refinement in the DC casting ingot of AZ80 magnesium alloy was achieved.Meanwhile,the morphology of the dentritic in the DC casting ingot was transformed from coarse dentritic to fine rosette with the application of low-voltage pulsed magnetic field.The ability of deformation of the ingot was enhanced and especially the plasticity of the ingot center after upsetting was improved greatly by more than 80%after deformation.展开更多
We review the latest aeromagnetic geological data of continental China. We discuss the latest achievements in geological mapping and the newly detected features based on aeromagnetic data. Using aeromagnetic data coll...We review the latest aeromagnetic geological data of continental China. We discuss the latest achievements in geological mapping and the newly detected features based on aeromagnetic data. Using aeromagnetic data collected for more than 50 years, a series of 1:5000000 and 1:1000000 aeromagnetic maps of continental China were compiled using state-of-the-art digital technology, and data processing and transformation. Guided by plate tectonics and continental dynamics, rock physical properties, and magnetic anomalies, we compiled maps of the depth of the magnetic basement of continental China and the major geotectonic units, and presented newly detected geological structures based on the aeromagnefic data.展开更多
A successful case history of exploring for concealed structure using the high-resolution EM method in the investigation of the West-East Gas Pipeline Project's B Tunnel is presented in this paper. The high frequency ...A successful case history of exploring for concealed structure using the high-resolution EM method in the investigation of the West-East Gas Pipeline Project's B Tunnel is presented in this paper. The high frequency electromagnetic image system named STRATAGEM EH4, operating at frequencies ranging from 90KHz to 1Hz, was used for data acquisition. The orthogonal components of the electromagnetic field were measured during the field acquisition and the relevant electromagnetic attributes of the object body were extracted from the electromagnetic data. Hybrid sources, consisting of natural and full tensor-controlled sources, were utilized to produce high-quality electromagnetic field data. B Tunnel lies in the western part of Hubei province, at depths of less than 200m. The geologic setting of B tunnel is very complex. Following an initial geologic investigation, an outcrop considered to be a bedrock interface by investigators, collapsed during tunneling operations. A second investigation applied high-resolution EM and seismic refraction methods to reveal a more complex geologic structure along the tunnel route. The predicted rock classes and fault were encountered during the subsequent tunneling operations.展开更多
The electromagnetic direct chill (EMDC) casting process is a welt-established production route for aluminum alloy ingot, however, the skin effect restricts the casting diameter. In order to avoid this problem, annul...The electromagnetic direct chill (EMDC) casting process is a welt-established production route for aluminum alloy ingot, however, the skin effect restricts the casting diameter. In order to avoid this problem, annulus electromagnetic direct chill (A-EMDC) casting process has been developed. A three-dimension finite element computational model of A-EMDC casting process was established by using ANSYS Magnetic-Nodal programs and FLOTRAN CFD programs. Microstruetures of A-EMDC casting semi-solid Al-6Si-3Cu-Mg alloy billets were investigated. Two pairs of vortexes occur within the crystallizer with opposite direction in A-EMDC. The annulus gap is advantageous to increasing circulate flow, reducing the temperature gradient as well as shallowing liquid sump depth. The microstructure obtained by A-EMDC is globular or rosette-like, and the microstructure is homogeneous in the billet.展开更多
The working principle of LFEC(Low frequency electromagnetic casting) process developed in Northeastern University, China was introduced and the metallurgical results of LFEC were discussed according to the casting p...The working principle of LFEC(Low frequency electromagnetic casting) process developed in Northeastern University, China was introduced and the metallurgical results of LFEC were discussed according to the casting practices. The low frequency field around the mold produces Lorenz force, which can be divided into two parts: one is the potential force which will be balanced by a pressure gradient of the liquid and results in the formation of a convex surface meniscus and improves the surface quality; the other is the rotary force which stirs the liquid in the mold to refine the microstructures and homogenize the distribution of alloying elements. LFEC can refine microstructures remarkably, improve surface quality of the ingots, depress macrosegregation and eliminate cracks. Some new technologies, such as horizontal direct chill casting under low-frequency electromagnetic field (HLEC), DC casting of hollow billets under electromagnetic fields (HBEC), electromagnetic modifying of hypereutectic A1-Si alloys(EMM), air film casting under static magnetic field (AFCM), and multi-ingots casting under low-frequency magnetic field (MLFEC) were developed based on LFEC.展开更多
The electromagnetic characteristics of cold wall crucible, especially its field strength and distribution, were evaluated experimentally, in which the effects of parameters as input power and position were also discus...The electromagnetic characteristics of cold wall crucible, especially its field strength and distribution, were evaluated experimentally, in which the effects of parameters as input power and position were also discussed. The results showed that the magnetic induction intensity (B) increased with the increase of the input power. Along the radial direction inside the cold crucible, B is the strongest at the edges, and gradually attenu- ated from the edges to the center. While along the axial direction, B is the strongest at the center, and gradually attenuated from the center to the edges. Corresponding with the calculation on electromagnetic field distribution inside the coil without cold crucible, the effects of cold crucible on the electromagnetic field have been reduced by comparing measured and calculated results. However, it was also found that the value of B strength will be decreased to about 50% of its original proposition without cold crucible due to the electromagnetic shielding effect, which will be the understanding for mehing turns in cold crucible.展开更多
AZM: To evaluate our experience in endoscopic retrograde cholangio-pancreatography (ERCP) in terms of fulfilling the ASGE guidelines in indications, positive findings, and complications in the post-magnetic resonan...AZM: To evaluate our experience in endoscopic retrograde cholangio-pancreatography (ERCP) in terms of fulfilling the ASGE guidelines in indications, positive findings, and complications in the post-magnetic resonance cholangiopancreatography (MRCP) era. METHODS: Between November 2001 and February 2003, consecutive ERCP cases were prospectively evaluated with regard to the indications, findings, cannulation techniques, devices used during the procedure, sedation given, duration of procedure, and complications. These data were entered in a database for subsequent processing and analysis. RESULTS: Of 336 cases, 21.4% were diagnostic and 78.6% therapeutic ERCR The indications for ERCP fulfilled the ASGE guidelines in 323 cases (96.1%). Suspected bile duct stone was the most frequent indication (26.8%), and this was followed by cholangitis (24.4%), dilated common bile duct (14.9%), and cholestatic jaundice (23.4%). Cannulation success rate was 94%. Biliary sphincterotomy was performed in 175 (52.1%) patients. Repeated ERCP was performed on 31.5% of the patients. Overall, the complication rate was 9.8% with 0.3% being procedurerelated mortality. The complications were pancreatitis (5.4%), bleeding (0.8%), cholangitis (2.4%) and others (1.5%). No significant difference was observed between the complication rate and the type of ERCP performed. CONCLUSION: Our study showed that post-ERCP complication rate was comparable with the other large prospective studies and there was no difference in the complication between the diagnostic and therapeutic ERCP.展开更多
AIM: To compare the value of endoscopic retrograde cholangiography (ERC) and standard T2-weighted magnetic resonance cholangiography (MRC) in the evaluation process as adult-to-adult right lobe living donor liver tran...AIM: To compare the value of endoscopic retrograde cholangiography (ERC) and standard T2-weighted magnetic resonance cholangiography (MRC) in the evaluation process as adult-to-adult right lobe living donor liver transplantation (LDLTx) demands a successful outcome, and exact knowledge of the biliary tree is implicated to avoid biliary complications, postoperatively.METHODS: After starting the LDLTx program, 18 liver transplant candidates were selected for LDLTx by a stepwise evaluation process. ERC and standard T2-weighted MRC were performed to evaluate the biliary system of the donor liver. The anatomical findings of ERC and MRC mapping were compared using the Ohkubo classification. RESULTS: ERC allowed mapping of the whole biliary system in 15/15 (100%) cases, including 14/15 (93.3%) with biliary variants while routine MRC was only accurate in 2/13 (15.4%) cases. MRC was limited in depicting the biliary system proximal of the hepatic bifurcation. Postoperative biliary complications occurred in 2 donors and 8 recipients. Biliary complications were associated with Ohkubo type C, E or G in 6/8 recipients, and 2/3 recipients with biliary leak received a graft with multiple (≥2) bile ducts. CONCLUSION: Pretransplant ERC is safe and superior over standard MRC for detection of biliary variations that occur with a high frequency. However, precise knowledge of biliary variants did not reduce the incidence of postoperative biliary complications.展开更多
The time-frequency electromagnetic (TFEM) method combines frequency-domain sounding with time-domain sounding to form a comprehensive system so that it is possible to select different frequencies and induce waves ac...The time-frequency electromagnetic (TFEM) method combines frequency-domain sounding with time-domain sounding to form a comprehensive system so that it is possible to select different frequencies and induce waves according to the objective depth to be explored. During processing not only resistivity but also polarization information can be provided so we can study resistivity as well as predict oil-bearing characteristics simultaneously. Timedomain resistivity information is obtained by pseudo-2D resistivity inversion and frequencydomain IP information is obtained using the Cole-Cole model. Some successful applications in western China show that it provides unique results in an overthrust zone, deep igneous rock investigation, and hydrocarbon prediction.展开更多
AIM: Evaluation of the wide range of normal findings in asymptomatic women undergoing dynamic magnetic resonance (MR) defecography. METHODS: MR defecography of 10 healthy female volunteers (median age: 31 years) witho...AIM: Evaluation of the wide range of normal findings in asymptomatic women undergoing dynamic magnetic resonance (MR) defecography. METHODS: MR defecography of 10 healthy female volunteers (median age: 31 years) without previous pregnancies or history of surgery were evaluated. The rectum was filled with 180 mL gadolinium ultrasound gel mixture. MR defecography was performed in the supine position. The pelvic floor was visualized with a dynamic T2-weighted sagittal plane where all relevant pelvic floor organs were acquired during defecation. The volunteers were instructed to relax and then to perform straining maneuvers to empty the rectum. The pubococcygeal line (PCGL) was used as the line of reference. The movement of pelvic floor organs was measured as the vertical distance to this reference line. Data were recorded in the resting position as well as during the defecation process with maximal straining. Examinations were performed and evaluated by two experienced abdominal radiologists without knowledge of patient history. RESULTS: Average position of the anorectal junction was located at -5.3 mm at rest and -29.9 mm during straining. The anorectal angle widened significantly from 93° at rest to 109° during defecation. A rectocele was diagnosed in eight out of 10 volunteers showing an average diameter of 25.9 mm. The bladder base was located at a position of +23 mm at rest and descended to -8.1 mm during defecation in relation to the PCGL. The bladder base moved below the PCGL in six out of 10 volunteers, which was formally defined as a cystocele. The uterocervical junction was located at an average level of +43.1 mm at rest and at +7.9 mm during straining. The uterocervical junction of three volunteers fell below the PCGL; described formally as uterocervical prolapse. CONCLUSION: Based on the range of standard values in asymptomatic volunteers, MR defecography values for pathological changes have to be re-evaluated.展开更多
Electromagnetic stir casting process of A357-Si C nanocomposite was discussed using the D-optimal design of experiment(DODOE) method. As the main objective, nine random experiments obtained by DX-7 software were perfo...Electromagnetic stir casting process of A357-Si C nanocomposite was discussed using the D-optimal design of experiment(DODOE) method. As the main objective, nine random experiments obtained by DX-7 software were performed. By this method, A357-Si C nanocomposites with 0.5, 1.0 and 1.5 wt.% Si C were fabricated at three different frequencies(10, 35 and 60 Hz) in the experimental stage. The microstructural evolution was characterized by scanning electron and optical microscopes, and the mechanical properties were investigated using hardness and roomtemperature uniaxial tensile tests. The results showed that the homogeneous distribution of Si C nanoparticles leads to the microstructure evolution from dendritic to non-dendritic form and a reduction of size by 73.9%. Additionally, based on DODOE, F-values of 44.80 and 179.64 were achieved for yield stress(YS) and ultimate tensile strength(UTS), respectively, implying that the model is significant and the variables(Si C fraction and stirring frequency) were appropriately selected. The optimum values of the Si C fraction and stirring frequency were found to be 1.5 wt.% and 60 Hz, respectively. In this case, YS and UTS for A357-Si C nanocomposites were obtained to be 120 and 188 MPa(57.7% and 57.9 % increase compared with those of the as-cast sample), respectively.展开更多
基金supported by the National Natural Science Foundation of China grant(U2244220)China Geological Survey Project grant(DD20190551,DD20230351)。
文摘The Qilian Orogenic belt is one of the typical orogenic belts globally and a natural laboratory for studying plate tectonics.Many researchers have studied the ophiolite and high pressure and ultra-high pressure metamorphic rocks in the Qilian orogen and obtained valuable achievements.However,a hot debate exists on the basement property,the distribution of ophiolite,and the boundaries of tectonic units.Large-scale high-precision aeromagnetic surveys have recently been conducted in the Qilian Orogenic belt and adjacent areas.In this study,we are trying to analysis the tectonic framework of the Qilian Orogen using 1:500,000 aeromagnetic data.The results provide geophysical perspectives for studying the structural framework and deformation of this area.According to the aeromagnetic∆T anomaly map,the central and Southern Qilian have the same magnetic anomaly feature that noticeably differs from the North Qilian Orogenic belt and the Qaidam Block.This result indicates that the central and Southern Qilian have a unified magnetic basement and differ from the North Qilian orogenic belt and Qaidam Block.The map shows the distribution of ophiolite in the North Qilian orogenic belt.Linear magnetic anomalies represent the ophiolites because the mafic–ultramafic rocks usually have high magnetic susceptibility.The ophiolite belts are continuously distributed in the western part of North Qilian orogenic belt and have a large scale.However,the scale of the ophiolite belt and the outcropping of mafic–ultramafic rocks reduces when they pass through Qilian County to the east.The results indicate differences in the evolution process between the eastern and western parts of North Qilian,with Qilian County as the transition zone.This study also systematically defines the geophysical boundaries of the Qaidam Block,Qilian Block,North Qilian Orogenic belt,and Alxa block.It is proposed that the sinistral displacement of the Altun Fault is adjusted and absorbed by the series of NE-trending faults in the Qilian orogen and merge into the Longshoushan–Gushi Fault.The extension of the North Qilian Orogenic belt is strengthened by the neotectonics movement along the shearing direction,which separated the North Qilian Orogenic belt into several segments and formed a series of northeast-trending faults.
文摘To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the conventional electromagnetic method in exploration depth,precision,and accuracy,the large-depth and high-precision wide field electromagnetic method is applied to the complex structure test area of the Luochang syncline and Yuhe nose anticline in the southern Sichuan.The advantages of the wide field electromagnetic method in detecting deep,low-resistivity thin layers are demonstrated.First,on the basis of the analysis of physical property data,a geological–geoelectric model is established in the test area,and the wide field electromagnetic method is numerically simulated to analyze and evaluate the response characteristics of deep thin shale gas layers on wide field electromagnetic curves.Second,a wide field electromagnetic test is conducted in the complex structure area of southern Sichuan.After data processing and inversion imaging,apparent resistivity logging data are used for calibration to develop an apparent resistivity interpretation model suitable for the test area.On the basis of the results,the characteristics of the electrical structure change in the shallow longitudinal formation of 6 km are implemented,and the transverse electrical distribution characteristics of the deep shale gas layer are delineated.In the prediction area near the well,the subsequent data verification shows that the apparent resistivity obtained using the inversion of the wide field electromagnetic method is consistent with the trend of apparent resistivity revealed by logging,which proves that this method can effectively identify the weak response characteristics of deep shale gas formations in complex structural areas.This experiment,it is shown shows that the wide field electromagnetic method with a large depth and high precision can effectively characterize the electrical characteristics of deep,low-resistivity thin layers in complex structural areas,and a new set of low-cost evaluation technologies for shale gas target layers based on the wide field electromagnetic method is explored.
基金Project(2013CB632203)supported by the National Basic Research and Development Program of ChinaProject(2014028027)supported by the Liaoning Provincial Natural Science Foundation,China
文摘Heat transfer behaviors of AZ80?1%Y alloy during low frequency electromagnetic casting (LFEC) and direct chilling casting were studied by in-situ temperature measurement. The results demonstrated that the low frequency electromagnetic field (EM) caused forced convection in the melt during LFEC. The forced convection led to uniform solidification velocity and temperature field. EM frequency, excitation current intensity and casting temperature could control the heat transfer behavior. The forced convection could improve the microstructure and degrade the difference in microstructure between the edge and center of billet. Appropriate parameters of low frequency EM for casting Mg alloy are 20 Hz of frequency and 60 A of electric current intensity.
基金Project(0211002605132)supported by Institute of Multipurpose Utilization of Mineral Resources,Chinese Academy of Geological Sciences,ChinaProject(0211005303101)supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project(2010BB4074)supported by Natural Science Foundation Project of CQ CSTC,ChinaProject(2010ZD-02)supported by State Key Laboratory for Advanced Metals and Materials,China
文摘The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys (x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%), produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and aging treatment. The effects of minor Sc and Zr addition on microstructure, recrystallization and properties of alloys were studied by optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that Sc and Zr addition can refine grains of the as-cast alloy by precipitation of primary Al3(Sc,Zr) particles formed during solidification as heterogeneous nuclei. Secondary Al3(Sc,Zr) precipitates formed during homogenization treatment strongly pin the movement of dislocation and subgrain boundaries, which can effectively inhibit the alloys recrystallization. Compared with the alloy without Sc and Zr addition, the Al-Zn-Mg-Cu-Zr alloy with 0.05%Sc and 0.15%Zr shows the increase in tensile strength and yield strength by 172 MPa and 218 MPa, respectively. Strengthening comes from the contributions of precipitation, substructure and grain refining.
基金Projects(51104043,51374067)supported by the National Natural Science Foundation of ChinaProject(2012CB619506)supported by the National Basic Research Program of ChinaProject(N120409002)supported by the Fundamental Research Funds for the Central Universities,China
文摘Low frequency electromagnetic casting (LFEC) process with the application of an induction coil outside the conventional direct chill (DC) casting mould was used to prepare the flat ingot of 2524 alloy and the effect of electromagnetic field on the microstructure and macrosegregation of this alloy was systematically studied. The results show that the fiat ingot prepared by the LFEC process has a finer and more uniform as-cast microstructure and the grain morphology is transformed from dendrite and rosette-like to equiaxed structure. The LFEC process also shows a significant effect on macrosegregation, and with the application of electromagnetic field during casting process, the segregation in the centre of the ingot is obviously reduced. The mechanism of these effects was also discussed.
基金Project(2005CB623707)supported by National Basic Research Project of China
文摘The effects of low frequency electromagnetic field on the macro-physical fields in the semi-continuous casting process of aluminum alloys and the microstructure and crack in the billets were studied and analyzed by the numerical and experimental methods.Comparison of the results for the macro-physical fields in the low frequency electromagnetic casting(LFEC) process with the conventional DC casting process indicates the following characters due to the application of electromagnetic field:an entirely changed direction and remarkably increased velocity of melt flow;a uniform distribution and a decreased gradient of temperature;elevated isothermal lines;a reduced sump depth;decreased stress and plastic deformation.Further,the microstructure of the billets is refined remarkably and the crack in the billets is eliminated in LFEC process because of modification of the macro-physical fields induced by the application of low frequency electromagnetic field.
基金Project(51034012)supported by the the National Natural Science Foundation of ChinaProject(2013CB632205)supported by the National Basic Research Program of China
文摘The effects of a low-voltage pulsed magnetic field on the solidified structure and mechanical properties of DC casting AZ80 magnesium alloy were investigated.The results showed that the solidified structure of the DC casting AZ80 magnesium alloy was refined obviously by the low-voltage pulsed magnetic field and significant grain refinement in the DC casting ingot of AZ80 magnesium alloy was achieved.Meanwhile,the morphology of the dentritic in the DC casting ingot was transformed from coarse dentritic to fine rosette with the application of low-voltage pulsed magnetic field.The ability of deformation of the ingot was enhanced and especially the plasticity of the ingot center after upsetting was improved greatly by more than 80%after deformation.
基金supported by the China Land Aeromagnetic Characteristics and Tectonic Structures Research(No.1212011087009)part of the national geological and mineral resources investigation projects,and the Comprehensive Exploration of Aero Geophysical&Remote Sensing Survey and Interpretation System Research(No.2013AA063905)part of the planning for national high technology research and development
文摘We review the latest aeromagnetic geological data of continental China. We discuss the latest achievements in geological mapping and the newly detected features based on aeromagnetic data. Using aeromagnetic data collected for more than 50 years, a series of 1:5000000 and 1:1000000 aeromagnetic maps of continental China were compiled using state-of-the-art digital technology, and data processing and transformation. Guided by plate tectonics and continental dynamics, rock physical properties, and magnetic anomalies, we compiled maps of the depth of the magnetic basement of continental China and the major geotectonic units, and presented newly detected geological structures based on the aeromagnefic data.
基金The work is sponsored by National Natural Science Foundation of China (No. 40074036).
文摘A successful case history of exploring for concealed structure using the high-resolution EM method in the investigation of the West-East Gas Pipeline Project's B Tunnel is presented in this paper. The high frequency electromagnetic image system named STRATAGEM EH4, operating at frequencies ranging from 90KHz to 1Hz, was used for data acquisition. The orthogonal components of the electromagnetic field were measured during the field acquisition and the relevant electromagnetic attributes of the object body were extracted from the electromagnetic data. Hybrid sources, consisting of natural and full tensor-controlled sources, were utilized to produce high-quality electromagnetic field data. B Tunnel lies in the western part of Hubei province, at depths of less than 200m. The geologic setting of B tunnel is very complex. Following an initial geologic investigation, an outcrop considered to be a bedrock interface by investigators, collapsed during tunneling operations. A second investigation applied high-resolution EM and seismic refraction methods to reveal a more complex geologic structure along the tunnel route. The predicted rock classes and fault were encountered during the subsequent tunneling operations.
基金Project(2009AA03Z534) supported by the National Hi-tech Research and Development Program of ChinaProject(2006CB605203) supported by the National Basic Research Program of China
文摘The electromagnetic direct chill (EMDC) casting process is a welt-established production route for aluminum alloy ingot, however, the skin effect restricts the casting diameter. In order to avoid this problem, annulus electromagnetic direct chill (A-EMDC) casting process has been developed. A three-dimension finite element computational model of A-EMDC casting process was established by using ANSYS Magnetic-Nodal programs and FLOTRAN CFD programs. Microstruetures of A-EMDC casting semi-solid Al-6Si-3Cu-Mg alloy billets were investigated. Two pairs of vortexes occur within the crystallizer with opposite direction in A-EMDC. The annulus gap is advantageous to increasing circulate flow, reducing the temperature gradient as well as shallowing liquid sump depth. The microstructure obtained by A-EMDC is globular or rosette-like, and the microstructure is homogeneous in the billet.
基金Project(2005CB623707) supported by the National Basic Research Program of China Projects(2007CB613701 and 2007CB613702) supported by the National Key Basic Research Program of China+2 种基金Projects(50974037,51004032 and 50904018) supported by the National Natural Science Foundation of ChinaProject(NCET-08-0098) supported by the New Century Excellent Talents in University,Ministry of Education,ChinaProject(20100471468) supported by China Postdoctoral Science Foundation
文摘The working principle of LFEC(Low frequency electromagnetic casting) process developed in Northeastern University, China was introduced and the metallurgical results of LFEC were discussed according to the casting practices. The low frequency field around the mold produces Lorenz force, which can be divided into two parts: one is the potential force which will be balanced by a pressure gradient of the liquid and results in the formation of a convex surface meniscus and improves the surface quality; the other is the rotary force which stirs the liquid in the mold to refine the microstructures and homogenize the distribution of alloying elements. LFEC can refine microstructures remarkably, improve surface quality of the ingots, depress macrosegregation and eliminate cracks. Some new technologies, such as horizontal direct chill casting under low-frequency electromagnetic field (HLEC), DC casting of hollow billets under electromagnetic fields (HBEC), electromagnetic modifying of hypereutectic A1-Si alloys(EMM), air film casting under static magnetic field (AFCM), and multi-ingots casting under low-frequency magnetic field (MLFEC) were developed based on LFEC.
文摘The electromagnetic characteristics of cold wall crucible, especially its field strength and distribution, were evaluated experimentally, in which the effects of parameters as input power and position were also discussed. The results showed that the magnetic induction intensity (B) increased with the increase of the input power. Along the radial direction inside the cold crucible, B is the strongest at the edges, and gradually attenu- ated from the edges to the center. While along the axial direction, B is the strongest at the center, and gradually attenuated from the center to the edges. Corresponding with the calculation on electromagnetic field distribution inside the coil without cold crucible, the effects of cold crucible on the electromagnetic field have been reduced by comparing measured and calculated results. However, it was also found that the value of B strength will be decreased to about 50% of its original proposition without cold crucible due to the electromagnetic shielding effect, which will be the understanding for mehing turns in cold crucible.
文摘AZM: To evaluate our experience in endoscopic retrograde cholangio-pancreatography (ERCP) in terms of fulfilling the ASGE guidelines in indications, positive findings, and complications in the post-magnetic resonance cholangiopancreatography (MRCP) era. METHODS: Between November 2001 and February 2003, consecutive ERCP cases were prospectively evaluated with regard to the indications, findings, cannulation techniques, devices used during the procedure, sedation given, duration of procedure, and complications. These data were entered in a database for subsequent processing and analysis. RESULTS: Of 336 cases, 21.4% were diagnostic and 78.6% therapeutic ERCR The indications for ERCP fulfilled the ASGE guidelines in 323 cases (96.1%). Suspected bile duct stone was the most frequent indication (26.8%), and this was followed by cholangitis (24.4%), dilated common bile duct (14.9%), and cholestatic jaundice (23.4%). Cannulation success rate was 94%. Biliary sphincterotomy was performed in 175 (52.1%) patients. Repeated ERCP was performed on 31.5% of the patients. Overall, the complication rate was 9.8% with 0.3% being procedurerelated mortality. The complications were pancreatitis (5.4%), bleeding (0.8%), cholangitis (2.4%) and others (1.5%). No significant difference was observed between the complication rate and the type of ERCP performed. CONCLUSION: Our study showed that post-ERCP complication rate was comparable with the other large prospective studies and there was no difference in the complication between the diagnostic and therapeutic ERCP.
文摘AIM: To compare the value of endoscopic retrograde cholangiography (ERC) and standard T2-weighted magnetic resonance cholangiography (MRC) in the evaluation process as adult-to-adult right lobe living donor liver transplantation (LDLTx) demands a successful outcome, and exact knowledge of the biliary tree is implicated to avoid biliary complications, postoperatively.METHODS: After starting the LDLTx program, 18 liver transplant candidates were selected for LDLTx by a stepwise evaluation process. ERC and standard T2-weighted MRC were performed to evaluate the biliary system of the donor liver. The anatomical findings of ERC and MRC mapping were compared using the Ohkubo classification. RESULTS: ERC allowed mapping of the whole biliary system in 15/15 (100%) cases, including 14/15 (93.3%) with biliary variants while routine MRC was only accurate in 2/13 (15.4%) cases. MRC was limited in depicting the biliary system proximal of the hepatic bifurcation. Postoperative biliary complications occurred in 2 donors and 8 recipients. Biliary complications were associated with Ohkubo type C, E or G in 6/8 recipients, and 2/3 recipients with biliary leak received a graft with multiple (≥2) bile ducts. CONCLUSION: Pretransplant ERC is safe and superior over standard MRC for detection of biliary variations that occur with a high frequency. However, precise knowledge of biliary variants did not reduce the incidence of postoperative biliary complications.
文摘The time-frequency electromagnetic (TFEM) method combines frequency-domain sounding with time-domain sounding to form a comprehensive system so that it is possible to select different frequencies and induce waves according to the objective depth to be explored. During processing not only resistivity but also polarization information can be provided so we can study resistivity as well as predict oil-bearing characteristics simultaneously. Timedomain resistivity information is obtained by pseudo-2D resistivity inversion and frequencydomain IP information is obtained using the Cole-Cole model. Some successful applications in western China show that it provides unique results in an overthrust zone, deep igneous rock investigation, and hydrocarbon prediction.
文摘AIM: Evaluation of the wide range of normal findings in asymptomatic women undergoing dynamic magnetic resonance (MR) defecography. METHODS: MR defecography of 10 healthy female volunteers (median age: 31 years) without previous pregnancies or history of surgery were evaluated. The rectum was filled with 180 mL gadolinium ultrasound gel mixture. MR defecography was performed in the supine position. The pelvic floor was visualized with a dynamic T2-weighted sagittal plane where all relevant pelvic floor organs were acquired during defecation. The volunteers were instructed to relax and then to perform straining maneuvers to empty the rectum. The pubococcygeal line (PCGL) was used as the line of reference. The movement of pelvic floor organs was measured as the vertical distance to this reference line. Data were recorded in the resting position as well as during the defecation process with maximal straining. Examinations were performed and evaluated by two experienced abdominal radiologists without knowledge of patient history. RESULTS: Average position of the anorectal junction was located at -5.3 mm at rest and -29.9 mm during straining. The anorectal angle widened significantly from 93° at rest to 109° during defecation. A rectocele was diagnosed in eight out of 10 volunteers showing an average diameter of 25.9 mm. The bladder base was located at a position of +23 mm at rest and descended to -8.1 mm during defecation in relation to the PCGL. The bladder base moved below the PCGL in six out of 10 volunteers, which was formally defined as a cystocele. The uterocervical junction was located at an average level of +43.1 mm at rest and at +7.9 mm during straining. The uterocervical junction of three volunteers fell below the PCGL; described formally as uterocervical prolapse. CONCLUSION: Based on the range of standard values in asymptomatic volunteers, MR defecography values for pathological changes have to be re-evaluated.
文摘Electromagnetic stir casting process of A357-Si C nanocomposite was discussed using the D-optimal design of experiment(DODOE) method. As the main objective, nine random experiments obtained by DX-7 software were performed. By this method, A357-Si C nanocomposites with 0.5, 1.0 and 1.5 wt.% Si C were fabricated at three different frequencies(10, 35 and 60 Hz) in the experimental stage. The microstructural evolution was characterized by scanning electron and optical microscopes, and the mechanical properties were investigated using hardness and roomtemperature uniaxial tensile tests. The results showed that the homogeneous distribution of Si C nanoparticles leads to the microstructure evolution from dendritic to non-dendritic form and a reduction of size by 73.9%. Additionally, based on DODOE, F-values of 44.80 and 179.64 were achieved for yield stress(YS) and ultimate tensile strength(UTS), respectively, implying that the model is significant and the variables(Si C fraction and stirring frequency) were appropriately selected. The optimum values of the Si C fraction and stirring frequency were found to be 1.5 wt.% and 60 Hz, respectively. In this case, YS and UTS for A357-Si C nanocomposites were obtained to be 120 and 188 MPa(57.7% and 57.9 % increase compared with those of the as-cast sample), respectively.