The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy. Results show that the dominant wear patterns are coating damage, crater wear, micro-chipping, break...The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy. Results show that the dominant wear patterns are coating damage, crater wear, micro-chipping, breakage, and so on. The main wear mechanisms are adhesion, diffusion and fatigue. Compared with conventional speed machining, the effect and impact of thermal-dynamical coupling field play an important role in the cutting tool wear in high-speed milling of aluminum alloy.展开更多
Cutting parameters were evaluated and optimized based on multiple performance characteristics including tool wear and size error of drilled hole. Taguchi＇s L27, 3-level, 4-factor orthogonal array was used for the tes...Cutting parameters were evaluated and optimized based on multiple performance characteristics including tool wear and size error of drilled hole. Taguchi＇s L27, 3-level, 4-factor orthogonal array was used for the tests. It is shown that generally abrasive wear and built up edge （BUE） formation were seen in the tool wear, and the comer wear was also of major importance. Flank wear of the cutting tool was found to be mostly dependent upon particle mass fraction, followed by feed rate, drill hardness and spindle speed, respectively. Among the tools used, TiAlN coated carbide drills showed the best performance with regard to the tool wear as well as hole size. Grey relational analysis indicated that drill material was the more influential parameter than feed rate and spindle speed. The results revealed that optimal combination of the drilling parameters could be used to obtain both minimum tool wear and diametral error.展开更多
A prediction model for net cutting specific energy in computer numerical control(CNC)turning based on turning parameters and tool wear is developed.The model can predict the net cutting energy consumption before turni...A prediction model for net cutting specific energy in computer numerical control(CNC)turning based on turning parameters and tool wear is developed.The model can predict the net cutting energy consumption before turning.The prediction accuracy of the model is verified in AISI 1045 steel turning.The comparative experimental results show that the prediction accuracy of the model is significantly improved because the influence of tool wear is taken into account.Finally,the influences of turning parameters and tool wear on net cutting specific energy are studied.With the increase of cutting depth,the net cutting specific energy decreases.With the increase of spindle speed,the additional load loss power of spindle drive system increases,so the net cutting specific energy increases.The net cutting specific energy increases approximately linearly with tool wear.The results are helpful to formulate efficient and energy-saving CNC turning schemes and realize low‑carbon manufacturing.展开更多
In all machining processes, tool wear is a natural phenomenon and it leads to tool failure. The growing demands for high productivity of machining need use of high cutting velocity and feed rate. Such machining inhere...In all machining processes, tool wear is a natural phenomenon and it leads to tool failure. The growing demands for high productivity of machining need use of high cutting velocity and feed rate. Such machining inherently produces high cutting temperature, which not only reduces tool life but also impairs the product quality. Metal cutting fluid changes the performance of machining operations because of their lubrication, cooling and chip flushing functions, but the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. The minimization of cutting fluid also leads to economical benefits by way of saving lubricant costs and workpiece/tool/machine cleaning cycle time. The concept of minimum quantity lubrication (MQL) has been suggested since a decade ago as a means of addressing the issues of environmental intru- siveness and occupational hazards associated with the airborne cutting fluid particles on factory shop floors. This paper deals with experimental investigation on the role of MQL by vegetable oil on cutting temperature, tool wear, surface roughness and dimen- sional deviation in turning AISI-1060 steel at industrial speed-feed combinations by uncoated carbide insert. The encouraging results include significant reduction in tool wear rate, dimensional inaccuracy and surface roughness by MQL mainly through reduction in the cutting zone temperature and favorable change in the chip-tool and work-tool interaction.展开更多
Carbon fiber reinforced silicon carbide matrix(Cf/SiC)composites have the most potential application for high-temperature components of aerospace high-end equipment.However,high cutting temperature,rapid tool wear and...Carbon fiber reinforced silicon carbide matrix(Cf/SiC)composites have the most potential application for high-temperature components of aerospace high-end equipment.However,high cutting temperature,rapid tool wear and severe surface damages are the main problems in dry cutting Cf/SiC composites process.The feasibility study on cryogenic milling of Cf/SiC composites using liquid nitrogen as coolant is investigated.Influences of milling parameters and coolant on temperature,cutting force,surface quality and tool wear are investigated,which is compared with dry cutting.Experimental results reveal that the cutting temperature in cryogenic milling of Cf/SiC composites is reduced by about 40%—60%compared with dry cutting.The milling force increases gradually with the increase of spindle speed,feed rate,depth and width of milling in cryogenic milling process.In addition,the machined surface quality in cryogenic milling is superior to that in dry cutting process.Fiber fracture,matrix damage and fiber matrix debonding are main material removal mechanisms.Flank face wear is the main wear form of the polycrystalline diamond(PCD)end mills.The tool life is prolonged in the cryogenic milling process because the reduced temperature inhibits the softening of Co binder and phase transition of diamond in the PCD end mills.展开更多
When machining D60 steel by high speed turn-milling under the different cooling and lubricating conditions, the cutting performance and the wear mechanism of the cermet cutter are researched. With water soluble coolin...When machining D60 steel by high speed turn-milling under the different cooling and lubricating conditions, the cutting performance and the wear mechanism of the cermet cutter are researched. With water soluble cooling fluid, the wear performance of the cermet cutter is bad, and does not adapt to the requirements of machining. However, when machining D60 by high speed turn-milling is under dry conditions, the wearing performance of the cermet cutter is very good and the cutting time lasts almost 3 hours. The wear mechanism of the cermet cutter under the water soluble cooling fluid is different from the dry condition. With the water soluble cooling fluid, a great deal of little chap units are formed since high frequency alternates heat stress. The crash and desquamate of these chap units is the main cause of the cutter wearing. Under dry cutting conditions, it is the main cause of cermet cutter wear in the felting phase intenerating causing rigid phase grains to fall.展开更多
In this paper, the effect of of flank wear polycrystalline cubic boron nitride （PCBN） tools on residual stresses, white layer and roughness of machined workpiece surfaces is studied. Experimental results indicate th...In this paper, the effect of of flank wear polycrystalline cubic boron nitride （PCBN） tools on residual stresses, white layer and roughness of machined workpiece surfaces is studied. Experimental results indicate that with the increase of the tool wear, the surface of the machined workpiece tends to generate tensile residual stresses, and white layer becomes clearly thicker and uneven on the workpiece surface. The effect of the flank wear on the surface roughness is less within some range of flank wear value. The results show that it is possible to produce ideal surface integrality levels by controlling the tool flank wear.展开更多
文摘The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy. Results show that the dominant wear patterns are coating damage, crater wear, micro-chipping, breakage, and so on. The main wear mechanisms are adhesion, diffusion and fatigue. Compared with conventional speed machining, the effect and impact of thermal-dynamical coupling field play an important role in the cutting tool wear in high-speed milling of aluminum alloy.
文摘Cutting parameters were evaluated and optimized based on multiple performance characteristics including tool wear and size error of drilled hole. Taguchi＇s L27, 3-level, 4-factor orthogonal array was used for the tests. It is shown that generally abrasive wear and built up edge （BUE） formation were seen in the tool wear, and the comer wear was also of major importance. Flank wear of the cutting tool was found to be mostly dependent upon particle mass fraction, followed by feed rate, drill hardness and spindle speed, respectively. Among the tools used, TiAlN coated carbide drills showed the best performance with regard to the tool wear as well as hole size. Grey relational analysis indicated that drill material was the more influential parameter than feed rate and spindle speed. The results revealed that optimal combination of the drilling parameters could be used to obtain both minimum tool wear and diametral error.
基金supported by the Project of Shandong Province Natural Science Foundation of China (No. ZR2016EEM29)the Project of Shandong Province Key Research Development of China (No.2017GGX30114)。
文摘A prediction model for net cutting specific energy in computer numerical control(CNC)turning based on turning parameters and tool wear is developed.The model can predict the net cutting energy consumption before turning.The prediction accuracy of the model is verified in AISI 1045 steel turning.The comparative experimental results show that the prediction accuracy of the model is significantly improved because the influence of tool wear is taken into account.Finally,the influences of turning parameters and tool wear on net cutting specific energy are studied.With the increase of cutting depth,the net cutting specific energy decreases.With the increase of spindle speed,the additional load loss power of spindle drive system increases,so the net cutting specific energy increases.The net cutting specific energy increases approximately linearly with tool wear.The results are helpful to formulate efficient and energy-saving CNC turning schemes and realize low‑carbon manufacturing.
基金Project (No. DEARS/CASR/R-01/2001/D-934 (30)) supported by Directorate of Advisory Extension and Research Services (DAERS), Committee for Advanced Studies & Research (CASR), BUET, Dhaka, Bangladesh
文摘In all machining processes, tool wear is a natural phenomenon and it leads to tool failure. The growing demands for high productivity of machining need use of high cutting velocity and feed rate. Such machining inherently produces high cutting temperature, which not only reduces tool life but also impairs the product quality. Metal cutting fluid changes the performance of machining operations because of their lubrication, cooling and chip flushing functions, but the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. The minimization of cutting fluid also leads to economical benefits by way of saving lubricant costs and workpiece/tool/machine cleaning cycle time. The concept of minimum quantity lubrication (MQL) has been suggested since a decade ago as a means of addressing the issues of environmental intru- siveness and occupational hazards associated with the airborne cutting fluid particles on factory shop floors. This paper deals with experimental investigation on the role of MQL by vegetable oil on cutting temperature, tool wear, surface roughness and dimen- sional deviation in turning AISI-1060 steel at industrial speed-feed combinations by uncoated carbide insert. The encouraging results include significant reduction in tool wear rate, dimensional inaccuracy and surface roughness by MQL mainly through reduction in the cutting zone temperature and favorable change in the chip-tool and work-tool interaction.
基金the National Natural Science Foundation of China(Nos.51705249,51875285)the China Postdoctoral Science Foundation(No.2019M661823)+1 种基金the Aeronautical Science Foundation of China(No.2017ZE52047)the Defense Industrial Technology Development Program(No.JCKY2018605C018)。
文摘Carbon fiber reinforced silicon carbide matrix(Cf/SiC)composites have the most potential application for high-temperature components of aerospace high-end equipment.However,high cutting temperature,rapid tool wear and severe surface damages are the main problems in dry cutting Cf/SiC composites process.The feasibility study on cryogenic milling of Cf/SiC composites using liquid nitrogen as coolant is investigated.Influences of milling parameters and coolant on temperature,cutting force,surface quality and tool wear are investigated,which is compared with dry cutting.Experimental results reveal that the cutting temperature in cryogenic milling of Cf/SiC composites is reduced by about 40%—60%compared with dry cutting.The milling force increases gradually with the increase of spindle speed,feed rate,depth and width of milling in cryogenic milling process.In addition,the machined surface quality in cryogenic milling is superior to that in dry cutting process.Fiber fracture,matrix damage and fiber matrix debonding are main material removal mechanisms.Flank face wear is the main wear form of the polycrystalline diamond(PCD)end mills.The tool life is prolonged in the cryogenic milling process because the reduced temperature inhibits the softening of Co binder and phase transition of diamond in the PCD end mills.
文摘When machining D60 steel by high speed turn-milling under the different cooling and lubricating conditions, the cutting performance and the wear mechanism of the cermet cutter are researched. With water soluble cooling fluid, the wear performance of the cermet cutter is bad, and does not adapt to the requirements of machining. However, when machining D60 by high speed turn-milling is under dry conditions, the wearing performance of the cermet cutter is very good and the cutting time lasts almost 3 hours. The wear mechanism of the cermet cutter under the water soluble cooling fluid is different from the dry condition. With the water soluble cooling fluid, a great deal of little chap units are formed since high frequency alternates heat stress. The crash and desquamate of these chap units is the main cause of the cutter wearing. Under dry cutting conditions, it is the main cause of cermet cutter wear in the felting phase intenerating causing rigid phase grains to fall.
基金Supported by the National Natural Science Foundation of China（No.50875068）,and the National High Technology Research and Development Programme of China（No.2009AA044302）.
文摘In this paper, the effect of of flank wear polycrystalline cubic boron nitride （PCBN） tools on residual stresses, white layer and roughness of machined workpiece surfaces is studied. Experimental results indicate that with the increase of the tool wear, the surface of the machined workpiece tends to generate tensile residual stresses, and white layer becomes clearly thicker and uneven on the workpiece surface. The effect of the flank wear on the surface roughness is less within some range of flank wear value. The results show that it is possible to produce ideal surface integrality levels by controlling the tool flank wear.
