The electrochemical and corrosion?wear behaviors of TC4 alloy in artificial seawater were studied. And the influences of electrochemical state on passive behavior, failure mechanism of passive film and corrosion?wear ...The electrochemical and corrosion?wear behaviors of TC4 alloy in artificial seawater were studied. And the influences of electrochemical state on passive behavior, failure mechanism of passive film and corrosion?wear synergy were emphatically analyzed. The corrosion?wear analysis of the alloy was fulfilled by methods of mass loss, electrochemical testing and scanning electron microscope (SEM). It can be observed that the cathodic shift of open circuit potential and three order of magnitude increase of current density can be obtained during corrosion?wear process. Total corrosion?wear loss increases with increasing applied potential, confirming the synergy between wear and corrosion. High polarisation potential results in low coefficient of friction and high corrosion rate. The relative contribution of pure mechanical wear to total material loss deceases obviously with the increase of potential from open circuit potential to 0.9 V during corrosion?wear. Contributions of wear-induced-corrosion and corrosion-induced-wear are significant especially at higher potentials.展开更多
A ternary Ni2FeSb shape memory alloy was fabricated by powder metallurgy route. Sintering kinetics was estimated from dilatometry tests; whereas the microstructure and morphology of the powder and consolidated bulk sa...A ternary Ni2FeSb shape memory alloy was fabricated by powder metallurgy route. Sintering kinetics was estimated from dilatometry tests; whereas the microstructure and morphology of the powder and consolidated bulk samples were evaluated by XRD and SEM, respectively. Microhardness tests were performed on the surface of sintered samples. The results indicated that milling time has an effect on the shape and particle size as well as the homogeneity of the crystalline structures of the powders. Samples with longer milling time presented higher relative densities, better distribution of the elements on the alloy as well as the L21 and martensite phases, which will give the shape memory effect. The estimated activation energy values ranged from 109 to 282 kJ/mol at temperatures between 750 and 1273 K, indicating that sintering is controlled mainly by volume diffusion. Microhardness was improved by increasing the milling time and the heating rate.展开更多
基金Project(LSL-1310)supported by the Open Project of State Key Laboratory of Solid Lubrication,ChinaProjects(2014QN013,2015GJB004)supported by the Research Foundation of Henan University of Science and Technology,China
文摘The electrochemical and corrosion?wear behaviors of TC4 alloy in artificial seawater were studied. And the influences of electrochemical state on passive behavior, failure mechanism of passive film and corrosion?wear synergy were emphatically analyzed. The corrosion?wear analysis of the alloy was fulfilled by methods of mass loss, electrochemical testing and scanning electron microscope (SEM). It can be observed that the cathodic shift of open circuit potential and three order of magnitude increase of current density can be obtained during corrosion?wear process. Total corrosion?wear loss increases with increasing applied potential, confirming the synergy between wear and corrosion. High polarisation potential results in low coefficient of friction and high corrosion rate. The relative contribution of pure mechanical wear to total material loss deceases obviously with the increase of potential from open circuit potential to 0.9 V during corrosion?wear. Contributions of wear-induced-corrosion and corrosion-induced-wear are significant especially at higher potentials.
基金PROMEP/103.5/13/6992 and the CIC of the UMSNH for the financial supportCONACYT under the project CB-2011-167111
文摘A ternary Ni2FeSb shape memory alloy was fabricated by powder metallurgy route. Sintering kinetics was estimated from dilatometry tests; whereas the microstructure and morphology of the powder and consolidated bulk samples were evaluated by XRD and SEM, respectively. Microhardness tests were performed on the surface of sintered samples. The results indicated that milling time has an effect on the shape and particle size as well as the homogeneity of the crystalline structures of the powders. Samples with longer milling time presented higher relative densities, better distribution of the elements on the alloy as well as the L21 and martensite phases, which will give the shape memory effect. The estimated activation energy values ranged from 109 to 282 kJ/mol at temperatures between 750 and 1273 K, indicating that sintering is controlled mainly by volume diffusion. Microhardness was improved by increasing the milling time and the heating rate.
