磷化膜与阴极电泳涂膜的配套性研究

为解决汽车阴极电泳涂装的质量问题，探索了磷化膜在阴极电泳涂装过程中的微观变化及其对涂层性能的影响；研究了磷化膜结构及组成（Ｐ比）对阴极电泳涂膜性能的影响，获得了评价磷化膜与阴极电泳涂膜配套性的最有效的方法。

低温磷化膜形成过程的研究

低碳钢试样经不同时间磷化后，用扫描电镜观察所形成的磷化膜，并监测磷化过程中试样的开路电位随时间的变化规律。研究结果表明，无定形低温磷化膜的形成过程，主要由基体浸蚀期、无定形完整膜层形成期、膜增厚及网状微裂纹形成期组成。试样的开路电位能很好地反映低温磷化膜的生成过程，可用来监控磷化膜的生长。

磷化在阀门制造业中的应用

报导了在国外阀门制造业中磷化技术用于涂装和喷漆工艺的信息，简要阐述了磷化的特点和磷化膜形成的机理。介绍了两个经过生产实践的磷化液配方，对磷化技术在我国阀门制造业中的应用和深入开发提出了建议和设想。

Influence of solution temperature on corrosion resistance of Zn-Ca phosphate conversion coating on biomedical Mg-Li-Ca alloys

The influence of phosphating bath at different temperatures on the formation and corrosion property of calcium-modified zinc phosphate conversion coating （Zn-Ca-P coating） on Mg-Li-Ca alloy was investigated. The morphologies, elemental distribution and chemical structures of the coatings were examined via SEM, EPMA, EDS, XRD and FT-IR. The corrosion resistance was assessed by hydrogen evolution, potentiodynamic polarization and EIS. The results show that the coating is composed of single element Zn and ZnO at below 45 ℃;whereas the coatings are predominantly characterized by Zn3（PO4）2·4H2O and small amount of element zinc and ZnO at above 50 ℃. Mg-Li-Ca alloy with Zn-Ca-P coatings prepared at 55 ℃ has the highest corrosion resistance. However, the hydrogen evolution rates of the coatings obtained at 40-50 ℃ is accelerated due to the galvanic corrosion between the imperfection of the single element Zn coating and the Mg substrate.

Corrosion resistance of cerium-doped zinc calcium phosphate chemical conversion coatings on AZ31 magnesium alloy

Zinc calcium phosphate （Zn-Ca-P） coating and cerium-doped zinc calcium phosphate （Zn-Ca-Ce-P） coating were prepared on AZ31 magnesium alloy. The chemical compositions, morphologies and corrosion resistance of coatings were investigated through energy-dispersive X-ray spectroscopy （EDS）, X-ray photoelectron spectroscopy （XPS）, X-ray diffraction （XRD）, electron probe micro-analysis （EPMA） and scanning electron microscopy （SEM） together with hydrogen volumetric and electrochemical tests. The results indicate that both coatings predominately contain crystalline hopeite （Zn3（PO4）2·4H2O）, Mg3（PO4）2 and Ca3（PO4）2, and traces of non-crystalline MgF2 and CaF2. The Zn-Ca-Ce-P coating is more compact than the Zn-Ca-P coating due to the formation of CePO4, and displays better corrosion resistance than the Zn-Ca-P coating. Both coatings protect the AZ31 Mg substrate only during an initial immersion period. The micro-galvanic corrosion between the coatings and their substrates leads to an increase of hydrogen evolution rate （HER） with extending the immersion time. The addition of Ce promotes the homogenous distribution of Ca and formation of hopeite. The Zn-Ca-Ce-P coating has the potential for the primer coating on magnesium alloys.

Phosphate film free of chromate, fluoride and nitrite on AZ31 magnesium alloy and its corrosion resistance

A phosphate solution free of chromate, fluoride and nitrite was prepared and an environment-friendly film was obtained on AZ31 magnesium alloy surface via the chemical deposition method. The morphology, composition, phase structure and its corrosion resistance were studied. The effects of film-forming temperature and free acid on corrosion resistance, microstructure and electrochemical behavior of the film were discussed. The results indicate that the corrosion resistance of AZ31 with the phosphate film was better than blank AZ31 substrate, which was most attributed to the great inhibitive action on the anodic dissolution and cathodic hydrogen evolution of the film.

Self-healing mechanism of composite coatings obtained by phosphating and silicate sol post-sealing

Silicate sol post-treatment was applied to form a complete composite coating on the phosphated zinc layer. The chemical compositions of the coatings were investigated using XPS. The coated samples were firstly scratched and then exposed to the neutral salt spray(NSS) chamber for different time. The microstructure and chemical compositions of the scratches were studied using SEM and EDS. And the non-scratched coated samples were compared. The self-healing mechanism of the composite coatings was discussed. The results show that during corrosion, the self-healing ions in composite coatings dissolve, diffuse and transfer to the scratches or the defects, and then recombine with Zn2+ to form insoluble compound, which deposits and covers the exposed zinc. The corrosion products on the scratches contain silicon, phosphorous, oxygen, chloride and zinc, and they are compact, fine, needle and flake, effectively inhibiting the corrosion formation and expansion of the exposed zinc layer. The composite coatings have good self-healing ability.

Biological,antibacterial activities and electrochemical behavior of borided commercially pure titanium in BSA-containing PBS

The effects of boride coating on the bioactivity, antibacterial activity, and electrochemical behavior of commercially pure titanium(CP-Ti) in phosphate buffer solution(PBS) with bovine serum albumin(BSA) were studied. The grazing incidence X-ray diffraction(GIXRD) pattern confirmed the formation of a Ti B/Ti B2 coating via boriding process. Scanning electron microscopy(SEM) observation indicated that the Ti B2 cross-linked particles covered the Ti B whiskers. Water contact angle measurements revealed that boriding led to the formation of a surface with intermediate water affinity. Potentiodynamic polarization(PDP) assays demonstrated that the Ti B/Ti B2 coating had acceptable passivation behavior in BSA-containing PBS. Electrochemical impedance spectroscopy(EIS) measurements revealed that the passivation behavior of the CP-Ti and the borided samples was improved by increasing exposure time. Based on the Mott-Schottky(M-S) tests, it was realized that the charge carriers of passive films of both samples decreased with increasing exposure time in BSA-containing PBS. The bioactivity test results in a simulated body fluid showed that the Ti B/Ti B2 coating switched the CP-Ti from bioinert to bioactive material. Finally, the antibacterial activity test of the Ti B/Ti B2 coating against Escherichia coli and Staphylococcus aureus indicated 99% antibacterial activity.

消除汽车车身磷化气阻，提高磷化质量

本文介绍了为提高汽车车身漆前处理中的磷化处理质量，采用的消除气阻的一系列方法，包括双点吊具倾斜法、打孔法、排气管排气法及新设计的排气法等。