示差光谱分析在作物残体腐解研究中的应用

采用示差光谱法对玉米叶片残体腐解过程进行了研究，并与常规谱进行了比较。结果表明，用示差光谱可以省去从腐解有机物中除去无机物的纯化过程，得到的红外光谱清晰可辨。

示差光谱法鉴定复杂混合纤维

应用红外衰减全反射法（IR－ATR）测定二组复杂混合纤维的红外谱图，采用示差光谱法对复杂混合纤维的光谱成功地进行了二次光谱的差减，得到了很好的单一组分的红外光谱图，从而鉴定了混合纤维的成分。

透明颤菌理化特性的研究

为研究透明颤菌在微生物发酵工业生产中的应用,本文对透明颤菌的理化特性进行了检测分析。透明颤菌的分离采用培养基(PYA)富集培养与形态观察法,采用分光光度计、光扫描与CO示差光谱确定透明颤菌的生理生化性质。透明颤菌在蛋白胨0.4%、酵母0.6%、乙酸钠(NaAc)0.02%、pH7.8、34℃,150 r/min时可获得较大生长速率;NaAc浓度为1%、pH7.5～8.0时菌体生长最快。透明颤菌在稳定期血红素含量约为每克湿菌中11 nmol左右,样品在5 000 r/min离心后出现血红蛋白的吸收峰。本文明确了透明颤菌的分离培养条件,并确定了理化性质,为在发酵工业生产中应用透明颤菌奠定了参考依据。

Temperature Dependence of Atmospheric NO3 Loss Frequency

A new indicator with temperature dependence of the NO3 loss frequency, was developed to study the contribution of NO3 to the oxidation of monoterpenes and NOx removal in the atmosphere. The new indicator arises from the temperature dependence of kinetic constant. The new indicator was applied to data of observation based on differential optical absorption spectroscopy system on the outskirts of Hefei, China. According to the findings, the contribution of monoterpenes to the loss of NO3 was 70%-80%.

微弱Raman信号的快速数字滤波处理

本文简单地介绍了微弱Raman信号的基本特征,提高信噪比的方法。讨论了信号的快速博里叶变换和数字滤波的程序处理技术,及其在示差光谱、消除本底中的应用。

Effect of a Novel Nucleating Agent on Isothermal Crystallization of Poly（L-lactic acid）

The effect of a novel active nucleating agent(TBC8-eb) on the isothermal crystallization of poly(L-lactic acid) (PLLA) was studied by differential scanning calorimetry(DSC) and Fourier transform infrared spectroscopy(FTIR) . The analysis on kinetics demonstrates that TBC8-eb can not only accelerate the crystallization rate but also transform most of the original spherulite crystals of PLLA into sheaf-like crystals. Furthermore,the free energy of folding(σe) of PLLA and PLLA with TBC8-eb is 0.15 and 0.06 J·m-2,respectively,which suggests that the addition of TBC8-eb favors the regular folding of molecule chains in the crystallization of PLLA,improv-ing its crystallization rate. The FTIR results show that TBC8-eb can accelerate the conformational ordering of PLLA in the isothermal crystallization. The conformational ordering of PLLA nucleated with TBC8-eb begins with the interchain interaction of CH3,and then a short helix emerges where a couple of CH3 groups interact.

Low-temperature phase transitions of sodium aluminate solutions

A series of low-temperature phase transitions of sodium aluminate solutions were studied by differential scanning calorimetry (DSC) and Raman spectroscopy. The results indicate that NaOH concentration is a primary impact factor for the binary eutectic point and ice melting temperature of sodium aluminate solutions with low NaOH concentration. In addition, the phase transition process of sodium aluminate solutions with low NaOH concentration from 123.15 to 283.15 K is divided into four steps: non-crystal to crystal, ternary eutectic reaction, binary eutectic reaction and ice melt. The projection phase diagram of NaOH-Al(OH)3-H2O system at low temperature was plotted, in which the ternary eutectic temperature for sodium aluminate solutions is 183.15 K.

Preparation and Characterization of Magnetic Resin Made from Chitosan and Cerium

In this study, the water-based ferromagnetic fluid and magnetic resin made from chitosan and cerium complex （MRCCC） were successfully prepared by using the chemical co-precipitation technique and by the reversed-phase suspension cross-linking polymerization. MRCCC presented uniform and narrow panicle size distribution as determined by the Laser Panicles Sizer. The Inductively Coupled Plasma-Atomic Emission Spectrometry （ICP-AES）, Fourier transform infrared spectroscopy （FT-IR）, differential scanning calorimetry （DSC） and X-ray powder diffraction （XRD） study demonstrated that there were iron and cerium existing in MRCCC. The movement of MRCCC under magnetic field proved its magnetic property. The swelling kinetics in water or solutions with different pH indicated that MRCCC could be applied in solutions with pH greater than 1.0. The ferromagnetic fluid particles were stable in MRCCC soaked in solutions with pH 〉2.0. In view of these results, MRCCC can be used as material for separation, clarification, adsorption, sustained release and hydrolysis activity.

Microstructure and dielectric properties of Ca-Al-B-Si-O glass/Al_2O_3 composites with various alkali oxides contents

The effects of alkali oxides （Na2O and K2O addition on both the sintering behavior and dielectric properties of Ca-AI-B-Si-O glass/Al2O3 composites were investigated by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimeter （DSC）, X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. The results show that the increasing amount of alkali oxides in the glass causes the decrease of [SiO4], which results in the decrease of the continuity of glass network, and leads to the decrease of the softening temperature Tf of the samples and the increasing trend of crystallization. And that deduces corresponding rise of densification, dielectric constant, dielectric loss of the low temperature co-fired ceramic （LTCC） materials and the decrease of its thermal conductivity. By contrast, the borosilicate glass/A1203 composites with 1.5% （mass fraction） alkali oxides sintered at 875 ℃ for 30 rain exhibit better properties of a bulk density of 2.79 g/cm3, a porosity of 0.48%, a 2 value of 2.28 W/（m.K）, a er value of 7.82 and a tand value of 9.1 × 10-4 （measured at 10 MHz）.

Investigation on specific heat capacity and thermal behavior of sodium hydroxyethyl sulfonate

The thermal decomposition process was studied by the TG–DTA analyzer. The results show that the decomposition process of sodium hydroxyethyl sulfonate consisted of three stages: the mass loss for the first, the second and third stages may be about the groups of CH_3CH_2OH, CH_3CHO and SO_2 volatilized, respectively. The decomposition residuum of three stages was analyzed by FT-IR, and the results of FT-IR agreed with the decomposition process predicted by theoretical weight loss. The specific heat capacity of sodium hydroxyethyl sulfonate was determined by differential scanning calorimetry(DSC). The melting temperature and melting enthalpy were obtained to be 465.41 K and 25.69 kJ·mol^(-1), respectively. The molar specific heat capacity of sodium hydroxyethyl sulfonate was determinated from 310.15 K to 365.15 K and expressed as a function of temperature.

Thermal behavior and mass spectrometry analysis of N-methyl-N-nitroso-p-toluenesulfonamide

The effect of temperature on the functional groups transition of N-methyl-N-nitroso-p-toluenesulfonamide （Diazald） and thermal decomposition were investigated by Fourier Transform Infrared Spectroscopy （FT-IR） and Differential Scanning Calorimeter （DSC）. The results showed that the functional groups transition of Diazald was temperature dependent, and thermal decomposition of Diazald was accelerated above 47.7℃. The HPLC-ESI-MS method was used for Diazald analysis, which indicated the strong hydrogen bonding between Diazald and water and instability of the NO group.

Physicochemical Characterization and Solubility Enhancement Studies of Mebendazole Solid Dispersions in Solvent Mixtures

Abstract： The objective was to obtain solid dispersion to improve the dissolution rate, solubility and oral absorption of MB （mebendazole）, poor water-soluble drugs. The new formulation was characterized by DSC （differential scanning calorimetry）, PXRD （powder X-ray diffraction）, FT-1R （fourier transform infrared spectroscopy） and STEM （scanning transmission electron microscopy） methods. Solid dispersions of MB with polyvinylpyrrolidone K-30 （PVP K30） were prepared by solvent evaporation method. The solubility of MB （original powder） and that of the solid dispersions was measured at 25℃ in ethanol-water. The aqueous solubility of MB was favoured by the presence of the polymer in solvent mixtures. Combination of solid dispersions with co-solvents increased the water solubility of MB in a larger extent that each method separately. Solubility parameter （o） was used to relate to solubility profiles. MB and the solid dispersions show a solubility curve with a single peak at 51 = 30.78 MPav2. Solid state characterizations indicated that the solid dispersion exist an amorphous material entrapped in polymer matrix getting highest improvement in wettability and solubility.

Synthesis and Antibacterial Performance of Quaternary Phosphonium Salts with Reactive Hydroxyl Group

Quaternary phosphonium salts （QPS） with reactive groups used as antibacterial agents are promising which could be covalently linked to inert polymer surfaces by in situ polymerization. In this work, two kinds of quaternary phosphonium salts with hydroxyl groups were synthesized successfully. Characterization of these two quaternary phosphonium salts was performed by the Fourier transform infrared spectroscopy （FT-IR） and nuclear magnetic resonance （NMR） spectrometry. The thermal stability and antibacterial activity of antibacterial agents were also investigated by using thermo-gravimetric analysis, differential scanning calorimetry （TG-DSC） and agar diffusion method. The test results showed that these two QPS exhibited good thermal stability and excellent antibacterial activity against both bacteria： Staphylococcus aureus and Escherichia coll.

Vgb在大肠埃希菌中表达及生物活性的研究

目的将vgb克隆到大肠埃希菌表达载体pQE-30中,研究vgb表达产物对细胞摄氧能力的影响。方法利用PCR和基因重组技术克隆vgb与大肠埃希菌表达质粒pQE V,大肠埃希菌转化采用CaCl2法,VHb活性分析采用CO示差光谱法。结果克隆了vgb和重组质粒pQE V,vgb基因在大肠埃希菌中获得表达,在A420 nm处达到典型吸收峰。结论 vgb在大肠埃希菌中表达产物加强了对氧的摄取能力,对解决细胞高密度发酵培养中氧需矛盾、促进代谢产物的产率具有非常重要的应用价值。

Chelating agents role on phase formation and surface morphology of single orthorhombic YMn_2O_5 nanorods via modified polyacrylamide gel route

YMn2O5nanorods were synthesized through a modified polyacrylamide gel route.The synthesis strategy in this work is based on a sol-gel process using a polyacrylamide gel method in which oxalic acid,citric acid or tartaric acid is employed as the chelating agent.In the gel routes,oxalic acid was used as a carboxyl chelating agent,while citric acid or tartaric acid was a carboxyl and hydroxyl chelating agent.The as-prepared samples were characterized by means of techniques such as X-ray powder diffraction(XRD)measurement,thermogravimetric analysis(TG),differential scanning calorimetry analysis(DSC),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),thermal expansion measurement and field-emission scanning electron microscopy(SEM)investigations.It was found that oxalic acid is the best chelating agent with Y(NO3)3·6H2O and Mn(CH3COO)2·4H2O as precursors to prepare a single orthorhombic YMn2O5nanorods at 1000°C.Scanning electron microscope observation shows that the morphology of YMn2O5powders is significantly dependent on the chelating agent.The peaks(single orthorhombic YMn2O5nanorods)at 642,600,573,546,521,493,486,468,448 and 400cm?1were observed from FTIR spectra.The phase,surface morphology and chelation mechanisms of YMn2O5samples have been discussed on the basis of the experimental results.

Cementing mechanism of bio-phosphate cement

Cementing mechanism of bio-phosphate cement was investigated by Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS), thermogravimetric-differential scanning calorimetry(TG-DSC) analysis and scanning electron microscopy(SEM). The results of FTIR and XPS show that Si-O bond and Si(2p) electron binding energy in sandstone cemented via chemical and microbiological methods are changed by the binding effects of barium hydrogen phosphate with quartz sand. Compared with barium hydrogen phosphate precipitated in solution, there were higher decomposition temperatures or melting points in sandstone. The FTIR, XPS, and TG-DSC results indicate that the microbial-induced and chemical precipitation of barium hydrogen phosphate can interact with quartz sand to generate van der Waals bond, which plays a role in the binding function between loose sand particles and barium hydrogen phosphate. SEM results show that barium hydrogen phosphate after chemical precipitation in sandstone has better dispersion than microbiological deposition. Therefore, barium hydrogen phosphate via chemical precipitation did not bind loose sand particles into sandstone.