离交法回收谷氨酸在甜菜糖蜜谷氨酸发酵中的应用

在谷氨酸生产中,发酵产酸率和谷氨酸提取收率是其主要的经济技术指标,也是企业降低成本,增加效益的要点。我厂常温等电点一次提取收率在75％左右,其余约25％的谷氨酸白白流失,生产成本居高不下。我厂曾于1978年就采用了等电点——离子交换法提取谷氨酸工艺,但是由于该离交工艺消耗酸碱量大。

反调pH值提取谷氨酸探讨

目前国内绝大多数谷氨酸生产厂家提取谷氨酸都是采用带菌体低温等电--离交法.此法随着工艺不断改进完善谷氨酸的提取收率已达95%以上,是个很成熟的工艺.

饮料糖与制糖工艺改革

论述了生产饮料糖的必要性和可行性 ,介绍了饮料糖的概念及其主要技术指标 ,分析讨论了包括按质论价、无滤布真空吸滤机、糖浆脱色剂、低温磷浮法。

Development of Prolonged Release Microspheres of Metformin Hydrochloride Using Ion Exchange Resins

Aim To prepare the prolonged-released microspheres of mefformin hydrochloride. Methods Ion-exchange resin-drug mefformin hydrochloride complexes were prepared as core materials, and followed by coating using ethylcellulose （EC） by the emulsion solvent diffusion technique. The release rate of mefformin from the microcapsules was highly dependent on the encapsulating formulation, thus being used as an index for formulation screening. Orthogonal experiments were performed to optimize the coating formulation. Results The final chosen formulation for coating of mefformin microcapsules were as follows： （ 1 ） the ratio of EC （20cps） to EC （45cps） was 50：50; （2） the ratio of plasticizer to coating materials was 20% ;and （3） the ratio of resin-mefformin complexes to coating materials was 5 ： 1. Conclusion The prolonged release microspheres of mefformin hydrochloride were successfully prepared.

Isolation of Lysozyme from Chicken Egg White Using Polyacrylamide-based Cation-exchange Cryogel

An effective cation-exchange chromatographic method for lysozyme isolation from chicken egg white is presented, using supermacroporous cryogel grafted with sulfo functional groups. The chromatographic processes were carried out by one-step and sequential elution, respectively. Sodium phosphate buffer （pH 7.8） containing different concentrations of NaC1 is used as elution agent. The corresponding breakthrough characteristics and elution behaviors in the cryogel bed were investigated and analyzed. Purity of lysozyme in the elution effluent was assayed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis （SDS-PAGE）. The maximum purity of the obtained lysozyme was about 96%, and the cryogel is demonstrated as a potential separation medium for purification of high-purit lysozyme from chicken egg white.

Purification of Lactic Acid by Heterogeneous Catalytic Distillation Using Ion-exchange Resins

The purification of lactic acid based on the esterification of raw lactic acid from fermentation broth and then the catalytic distillation hydrolysis of methyl lactate simultaneously to achieve pure lactic acid is reported. The esterification kinetics of lactic acid with methanol catalyzed by strong-acid cation-exchange resins (Amberlyst-15,D001, D002, NKC, 002) was studied under the condition that simulates the real catalytic environment. Experimental results were correlated by a Langmuir-Hinselwood model and the nonideality of the solution was taken into account by using activities calculated by the universal quasichemical functional group activity coefficient (UNIFAC) method.A good agreement between the model and the experimental data was achieved. Continuous purification experiments were conducted to find the optimum column configuration and operation condition for the system. The effects of various parameters, e.g. the length of different section of the column, feed rate and ratio of reactants, packing material and catalyst type, were studied. This novel system shows good separation results in lab scale, and is potential for industrial application.

A NOVEL DIRECTION OF ARRIVAL ESTIMATOR

A Direction Of Arrival(DOA) estimator based on the signal separation principle is introduced, and one of representative multidimensional estimators is established by introducing Matrix Operator projection signal steering Vector Excision(MOVE) operation. Thanks to Alternating Separation (AS) technique, the multidimensional problem is transformed into a series of one-dimensional optimal ones. Furthermore, an equivalent simplified implementation of the AS is obtained. Finally the definiteness and uniqueness of the estimator are analyzed.

Equilibrium and kinetics of copper ions removal from wastewater by ion exchange

The removal of copper ions from wastewater by ion exchange has been studied using an iminodiacetate resin.The capacity of the resin for the copper ions has been determined to be 2.30 mmol·g^(-1) by measuring the equilibrium isotherm at 25 °C and initial pH value of 3.5 where the final equilibrium p H value is 5. An analysis of equilibrium isotherm models showed that the best fit model was the Langmuir–Freundlich. The kinetics of the ion exchange process have been investigated and four kinetic models have been tested namely: Ritchie model, pseudo-second order model, pseudo-first order model and the Elovich model. The pseudo-second order model provides the best fit to the kinetic data.

Preparation and antimicrobial ability of natural porous antibacterial materials

The liquid ion exchange method, solid salt melt method and dry-wet circulation method were used to prepare natural porous antimicrobial materials with natural minerals, such as zeolite, spilite, palygorskite and montmorillonite, respectively. Atomic absorption spectrum and X-ray diffraction analysis were carried out to investigate the effects of Ag^＋ , Cu^2＋ and Zn^2＋ on antimicrobial abilities of natural porous minerals, and the effect of preparation method on ion exchange capacity of antimicrobial material, respectively. The results show that for the ion exchange capacity, clay mineral is higher than fibrous mineral, i.e. both zeolite and montmorillonite are higher; the antimicrobial ability of material with Ag^＋ is the bests the exchange capacities of materials with Cu^2＋ or Zn^2＋ are all higher, but the antimicrobial ability of Cu^2＋ is better than that of Zn^2＋ .

Purification and characterization of novel κ-carrageenase from marine Tamlana sp.HC4

We isolated a bacterial strain （HC4） that is able to degrade k-carrageenan from a live specimen of the red alga Hyalosiphonia caespitosa. With 16S rRNA gene sequencing, we identified the strain as Tamlana sp., and then purified an extracellular K-carrageenase from a culture of Tamlana sp. HC4 by ammonium sulfate precipitation, Sephadex G-200 gel filtration chromatography, and DE-cellulose 52 anion-exchange chromatography. The purified enzyme yields a single band on SDS-PAGE with a molecular mass of 66.4 kDa. The optimal pH and temperature for κ-carrageenase activity are at 8.0 and 30~C, respectively. The enzyme is stable over the range ofpH 7.2-8.6 below 45℃. The enzyme activity is strongly inhibited by Zn2＋ and Cu2＋ at 1 mmol/L. The enzyme-catalyzed reaction follows Michaelis-Menten kinetics with the Michaelis constant （Kin） at 7.63 mg/ml. Analysis of the degradation products of the κ-carrageenase by ESI-MS and 13C-NMR spectroscopy indicates that the enzyme degrades κ-carrageenan down to the level ofκ-neocarrabiose sulfate.

Assessment of Cation Exchange Membrane Method and Estimation of Potassium Critical Values

Soil and tissue analyses are usually used in identifying potassium(K) deficiencies and predicting K fertilizer requirements of crops.The critical levels of both soil and fresh leaf tissue at seventh leaf stage were developed and assessed for canola,chickpea and sunflower grown on two Saskatchewan,soils,with six rates of K fertilizer supply, in a growth chamber experiment.The available potassium in soils was determined by two methods:1)resin strip extraction, and 2) NH4OAC extraction. The potassium in fresh leaves was determined at seventh leaf stage by a simple procedure using a common garlic press and injector to extract the plant sap and testing the sap with a handheld ion selection electrode meter. The results shoWed significant relationships between the resin strip extractable K and NH4OAC extractable K, and between the plant uptake of total K and the supply of available K in the soils determined by the two methods. Good relationships were also found between the potassium in fresh leaves and the plant uptake of total K for canola, chickpea and sunflower.The resin strip extraction for K was calibrated using common NH4OAC extraction, and recommended for routine analyses because of its simplicity and sensitivity.

Determination of rhenium and osmium by ICP-MS for galena and sphalerite

Digestion with aqua regia in a Carius tube and separation of Re with anion exchange resin is commonly employed for Re–Os dating of molybdenite and pyrite.However, the recovery of Re is extremely low when this routine anion exchange method is applied to galena,causing difficulty in Re–Os dating of galena. In this study,we investigated the mechanism of Re loss during sample preparation and tested a revised procedure for Re–Os dating of galena and sphalerite.

Synthesis, characterization and antimicrobial activity of alkaline ion-exchanged ZnO/bentonite nanocomposites

Nanocomposites of zinc/bentonite clay were synthesized for use as an antibacterial material by a quick and simple alkaline ion exchange method. The synthesis of zinc doped bentonite nanocomposite was accomplished by placing bentonite in a melting bath of ZnSO4 for 10, 20, 40, 60 and 90 rain. The complexes were characterized by XRD, SEM and DRS. XRD analyses and SEM observations confirmed the diffusion of zinc to the clay surfaces. Antibacterial activity tests against Escherichia coli showed that bentonite did not present any antibacterial properties, but after alkaline ion exchange treatment, inhibition was noted. The highest antibacterial activity was observed with ZnO/bentonite composite alkaline ion exchange for 60 and 90 rain. Interestingly, the leaching test indicated that ZnO/bentonite did not present any risk for drinking water treatment.

Optimization of DsbA Purification from Recombinant Escherichia coli Broth Using Box-Behnken Design Methodolog

Disulfide bond formation protein A （DsbA） is one of the important helper proteins for folding in protein synthesis in vivo. In this study, purification of recombinant DsbA was investigated by examining four important factors with Box-Behnken design method, a statistic-based design of experiments. The optimal operation conditions were obtained by adopting the effectiveness coefficient method on the multi-objective problem, which takes the protein recovery, purification efficiency and throughput of ion-exchange chromatography into account. After the optimization, protein recovery of 96.8% and purity higher than 95% DsbA was achieved, and the productivity was （377.9±1.7） mg soluble DsbA per liter broth. The purified protein was identified by peptide mass fingerprinting matching the record of gil2624856, a mutant of DsbA. The DsbA was preliminarily applied to the refolding of denatured lysozyme in vitro.

Wave field forward modeling and theoretical analysis of weakness in discrete media

The elasticity, viscosity, and the relationships derived from rheology weakness properties are taken into account in mechanics. Comparing with the corresponding relationships derived from damage mechanics, we find the weakness factor has the same significance as the damage factor. We simulate the wave field using a staggered-grid pseudospectral method to show the influence of the weakness factor qualitatively. Applying the analytical solution of plane waves, we give the velocity and attenuation coefficient of three body waves, which are affected by the wave frequency and the weakness factor of saturated discrete media. Our results show that velocity decreases with increasing weakness factor, the attenuation coefficient increases with an increase in the weakness factor, and that the influence of weakness depends on the mode of the body waves.

A Privilege Separation Method for Security Commercial Transactions

Privilege user is needed to manage the commercial transactions, but a super-administrator may have monopolize power and cause serious security problem. Relied on trusted computing technology, a privilege separation method is proposed to satisfy the security management requirement for information systems. It authorizes the system privilege to three different managers, and none of it can be interfered by others. Process algebra Communication Sequential Processes is used to model the three powers mechanism, and safety effect is analyzed and compared.