岩石应力与渗透率的关系

根据岩芯样品渗透率分析值和岩石水平应力，以回归分析技术研究了二者的定量关系。水平应力由测井资料计算，检查了不同应力模型的适用性。用常用对数分析水平应力与渗透率的关系符合实际资料，取得了较好的效果。引入自然伽马测井，减少了岩性的影响，提高了实用意义。增加分辨率高的测井方法处理，使确定的渗透率有较高的分辨率。

Overlapped peaks resolution for linear sweep polarography using Gaussian-like distribution

A resolution method based on Gaussian-like distribution for overlapped linear sweep polarographic peaks was proposed to simultaneously detect the polymetallic components, such as Zn（Ⅱ） and Co（Ⅱ）, coexisting in the leaching solution of zinc hydrometallurgy. A Gaussian-like distribution was constructed as the sub-model of overlapped peaks by analyzing the characteristics of linear sweep polarographic curve. Then, the abscissas of each peak and trough were pinpointed through multi-resolution wavelet decomposition, the curve and its derivative curves were fitted by using nonlinear weighted least squares （NWLS）. Finally, overlapped peaks were resolved into independent sub-peaks based on fitted reconstruction parameters. The experimental results show that the relative error of half-wave potential pinpointed by multi-resolution wavelet decomposition is less than 1% and the accuracy of Ip fitted by NWLS is higher than 96%. The proposed resolution method is effective for overlapped linear sweep polarographic peaks of Zn（Ⅱ） and Co（Ⅱ）.

AUTOFOCUSING OF SYNTHETIC HRR RADAR USING STEPPED FREQUENCY WAVEFORMS

Most operating radar systems don′t have sufficient frequency bandwidth to produce high range resolution(HRR) profile of a target. But we can use stepped frequency waveform in a narrow band coherent radar to obtain the HRR profile of a target. For moving targets which are of great importance in practical radar usage, autofocusing,i.e. phase correction, is a necessary and critical step of the synthetic HRR processing. The purpose of autofocusing is to remove the radial motion effect of the target from radar echoes, and only reserve the stepped frequency effect which is the basis of synthetic HRR capability. We investigate two autofocusing approaches for synthetic HRR radars using stepped frequency waveform in this paper. The first is motion fitting method. This method depends on a certain parametric model, and is computationally expensive. Then we propose the iterative dominant scatterer method. It is robust, non parametric and simple in computation in comparison with the motion fitting method. Experimental results based on data acquired by using a metallised scale model B 52 in a microwave anechoic chamber reveal the validity and effectiveness of the method.

电脑生鲜超市

北京 Intel赛扬涨价,硬盘价格继续走低内存的价格还是在上涨,下半年的时间就是SDRAM最后的黄昏。DDR构架无论是从性能,还是价格的角度考虑,都不会给SDRAM留下更多的空间。虽然DDR内存价格近期仍然不稳定,但是我们还是建议大家购买256MB的容量,因为微软的WIN2000/XP并不节约内存,还要兼顾其他程序的开销,256MB算是解决温饱。由于CL延时的问题,是选CL=2的DDR266,还是CL=3的DDR333,性能差异并不明显,买个稳定些的更好。 CPU方面的变化到是不少,但是价格上下波动的幅度并不大。P4 1.7GHz和赛扬1.7GHz两款CPU为目前市场上最为热销的产品,P4 1.7GHz的价格变化不是很大,而赛扬1.7GHz由于其性价比极高,出货量格外大,价格也随之上涨到了710元。P4赛扬的出现给了AMD很大的打击,AMD目前还没有比较有效的方法来缓解其CPU销售的低靡状态,唯一的办法只有不断地降低其产品的售价,但是面对价格低廉、主频很高的赛扬1.7GHz CPU来说,降价似乎并不是一种很有效的方法,许多装机用户点名要使用赛扬1.7GHz,用户对其的热忠程度并不亚于当年的赛扬300A。硬盘的价格还在一如既往地下降,并没有因为暑期装机高峰的到来而有所缓解。由于前段时期各品牌间价格战将市场价格压得很低,因此即使需求出现上涨,

节能环保 三星黑白激光打印机新品ML-2245

2008年,随着绿色奥运的口号响彻中华,国内越来越多的打印机厂商也开始将目光集中在产品的节能环保特性上;同时,"绿色"产品在市场上也受到越来越多用户的青睐。日前,在三星电子举行的主题为"灵机一动、

FEATURE EXTRACTION AND RECOGNITION FOR ECHOES OF HRR RADAR

This paper describes a novel target recognition scheme using High Range Resolution (HRR) radar signatures. AutoRegressive (AR) method is used to extract features from HRR radar echoes based on scattering center model of target. The optimal linear transformation based on Euclidian distribution distance criterion is performed on AR model parameter vectors to reduce dimension of feature vectors further and improve the class discrimination capability of feature vectors. The optimization algorithm is designed utilizing the quadratic property of criterion function and Gaussian kernel based Parzen window density function estimator. The concept of Stochastic Information Gradient (SIG) is incorporated into the gradient of cost function to decrease the computational complexity of the algorithm. Simulation results using three real airplanes,data show the effectiveness of the proposed method.

HIGH RESOLUTION RANGE PROFILE FORMATION BASED ON LFM SIGNAL FUSION OF MULTIPLE RADARS

This paper presents a new method of High Resolution Range (HRR) profile formation based on Linear Frequency Modulation (LFM) signal fusion of multiple radars with multiple frequency bands. The principle of the multiple radars signal fusion improving the range resolution is analyzed. With the analysis of return signals received by two radars,it is derived that the phase difference between the echoes varies almost linearly with respect to the frequency if the distance between two radars is neg-ligible compared with the radar observation distance. To compensate the phase difference,an en-tropy-minimization principle based compensation algorithm is proposed. During the fusion process,the B-splines interpolation method is applied to resample the signals for Fourier transform imaging. The theoretical analysis and simulations results show the proposed method can effectively increase signal bandwidth and provide a high resolution range profile.

Determination of trace elements in high purity nickel by high resolution inductively coupled plasma mass spectrometry

The contents ofMg, Al, Si, Ti, Cr, Mn, Fe, Co, Cu, Ga, As, Se, Cd, Sb, Pb and Bi in high purity nickel were determined by high resolution inductively coupled plasma mass spectrometry （HR-ICP-MS）. The sample was dissolved in HNO3 and HCI by microwave digestion. Most of the spectral interferences could be avoided by measuring in the high resolution mode. The matrix effects because of the presence of excess HC1 and nickel were evaluated. Correction for matrix effects was made using Sc, Rh and T1 as internal standards. The optimum conditions for the determination were tested and discussed. The detection limits range from 0.012 to 1.76 ~tg/g depending on the type of elements. The applicability of the proposed method is also validated by the analysis of high purity nickel reference material （NIST SRM 671）. The relative standard deviation （RSD） is less than 3.3%. Results for determination of trace elements in high purity nickel were presented.

Unraveling Vibrational Wavepacket Dynamics using Femtosecond Ion Yield Spectroscopy and Photoelectron Imaging

Time-resolved photoionization is a powerful experimental approach to unravel the excited state dynamics in isolated polyatomic molecules. Depending on species of the collected signals, different methods can be performed: time-resolved ion yield spectroscopy (TR-IYS) and time-resolved photoelectron imaging (TR-PEI). In this review, the essential concepts linking photoionization measurement with electronic structure are presented, together with several important breakthroughs in experimentally distinguishing the oscillating wavepacket motion between different geometries. We illustrate how femtosecond TR-IYS and TR-PEI are employed to visualize the evolution of a coherent vibrational wavepacket on the excited state surface.

Fault Feature Extraction of Rotating Machinery Based on Wavelet Transformation and Multi-resolution Analysis

This paper expounded in detail the principle of energy spectrum analysis based on discrete wavelet transformation and multiresolution analysis. In the aspect of feature extraction method study, with investigating the feature of impact factor in vibration signals and considering the non-placidity and non-linear of vibration diagnosis signals, the authors import wavelet analysis and fractal theory as the tools of faulty signal feature description. Experimental results proved the validity of this method. To some extent, this method provides a good approach of resolving the wholesome problem of fault feature symptom description.

An Improved Method for Modeling Spatial Distribution of δD in Surface Snow over Antarctic Ice Sheet

Using the recent compilation of the isotopic composition data of surface snow of Antarctic ice sheet, we proposed an improved interpolation method of δD, which utilizes geographical factors （i.e., latitude and altitude） as the primary predictors and incorporates inverse distance weighting （IDW） technique. The method was applied to a high-resolution digital elevation model （DEM） to produce a grid map of multi-year mean δD values with lkm spatial resolution for Antarctica. The mean absolute deviation between observed and estimated data in the map is about 5.4‰, and the standard deviation is 9‰. The resulting δD pattern resembles well known characteristics such as the depletion of the heavy isotopes with increasing latitude and distance from coast line, but also reveals the complex topographic effects.

Study of SAR imaging with COMPASS signal

A concept of space-surface bistatic synthetic aperture radar (SS-BSAR) passive imaging system is proposed,which is parasitic on the signal of COMPASS Navigation Satellite System (CNSS).The feasibility is demonstrated by analyzing the signal ambiguity function and the range resolution as well as the system topology.Due to the multiple peaks of signal in the auto-correlation function,a new correlation is used to remove the side-peaks.A double-channel receiver is employed to receive the direct satellite signal and the ground reflected signal.The direct signal is a reference signal in range compression,and may also be used for transmitter-receiver signal synchronization.The reflected signal is raw data collected for imaging.Then,a modified range-Doppler imaging algorithm is derived based on the system geometric models and BSAR imaging principle.The proposed algorithm is verified via signal simulation.The work in this paper is of great value to the further use of COMPASS signal,as well as other global navigation satellite signals in passive imaging.

Analysis about the speckle of radar high resolution range profile

The aspect sensitivity is the main problem in radar automatic target recognition using high resolution range profile (HRRP). In the traditional viewpoint,HRRPs are assumed to be highly similar if the aspect variation is not enough to cause range migration. However,some experiments in anechoic chambers don’t agree with the assumption. Particularly,some abnormal HRRPs often occur in the measured data. Based on the scattering center model,this paper focuses on the reason of abnormal HRRP,which is named as the speckle. The theoretical model of speckle is established and the "spurious dual peaks" feature of the speckled HRRP is analyzed. Then the occurrence condition of speckle is concluded,and so is the relationship between the speckle probability in HRRP and radar carrier frequency. At last,the experiment in an anechoic chamber is used to verify all the analyses about the speckle.

Scanning Tunneling Microscope Observations of Non-AB Stacking of Graphene on Ni Films

Microscopic features of graphene segregated on Ni films prior to chemical transfer--including atomic structures of monolayers and bilayers, Moire patterns due to non-AB stacking, as well as wrinkles and ripples caused by strain effects-have been characterized in detail by high-resolution scanning tunneling microscopy （STM）. We found that the stacking geometry of the bilayer graphene usually deviates from the traditional Bernal stacking （or so-called AB stacking）, resulting in the formation of a variety of Moir6 patterns. The relative rotations inside the bilayer were then qualitatively deduced from the relationship between Moir6 patterns and carbon lattices. Moreover, we found that typical defects such as wrinkles and ripples tend to evolve around multi-step boundaries of Ni, thus reflecting strong perturbations from substrate corrugations. These investigations of the morphology and the mechanism of formation of wrinkles and ripples are fundamental topics in graphene research. This work is expected to contribute to the exploration of electronic and transport properties of wrinkles and ripples.

A relaxation scheme for a multi-class Lighthill-Whitham-Richards traffic flow model

We present a high-resolution relaxation scheme for a multi-class Lighthill-Whitham-Richards (MCLWR) traffic flow model. This scheme is based on high-order reconstruction for spatial discretization and an implicit-explicit Runge-Kutta method for time integration. The resulting method retains the simplicity of the relaxation schemes. There is no need to involve Riemann solvers and characteristic decomposition. Even the computation of the eigenvalues is not required. This makes the scheme particularly well suited for the MCLWR model in which the analytical expressions of the eigenvalues are difficult to obtain for more than four classes of road users. The numerical results illustrate the effectiveness of the presented method.

Modeling detector response function of alpha particles for neutron depth profiling

The energy spreading of recorded ions is influenced by straggling,geometrical acceptance angles and detector energy resolution effects in neutron depth profiling(NDP)and a symmetric Gaussian function model was customarily applied before.In addition,the spectra of mono-energetic alpha particles show a well known asymmetric shape as well when measured by silicon detectors.This article presents a physical model predicting the observed energy spectrum of a sample ion with target nuclides in prearranged depths.It is expressed as the convolution of a Gaussian function with a left-hand double-exponential function.Experiment showed that the predicted ions spectrum derived from the asymmetric model matches the observed energy spectrum.Therefore,the model can be applied to produce matrix for inversion of NDP spectrum.

Si@Cu@Au AFM tips for tip-enhanced Raman spectrum

Tip-enhanced Raman spectrum(TERS) is a scanning probe technique for acquiring chemical information at high spatial resolution and with high chemical sensitivity. The sensitivity of TERS with atomic force microscopy(AFM) system is mainly determined by the metalized tips. Here, we report a fabrication protocol for AFM-TERS tips that incorporate a copper(Cu) primer film between a gold(Au) layer and a Si AFM tip. They were fabricated by coating the Si tip with a 2 nm Cu layer prior to adding a 20 nm Au layer. For top illumination TERS experiments, these tips exhibited superior TERS performance relative to that observed for tips coated with Au only. Samples included graphene, thiophenol and brilliant cresyl blue. The results may derive from the surface roughness of the tip apex and a Cu/Au synergism of local surface plasmon resonances.