Development of advanced electron tomography in materials science based on TEM and STEM

The recent developments of electron tomography（ET） based on transmission electron microscopy（TEM） and scanning transmission electron microscopy（STEM） in the field of materials science were introduced. The various types of ET based on TEM as well as STEM were described in detail, which included bright-field（BF）-TEM tomography, dark-field（DF）-TEM tomography, weak-beam dark-field（WBDF）-TEM tomography, annular dark-field（ADF）-TEM tomography, energy-filtered transmission electron microscopy（EFTEM） tomography, high-angle annular dark-field（HAADF）-STEM tomography, ADF-STEM tomography, incoherent bright field（IBF）-STEM tomography, electron energy loss spectroscopy（EELS）-STEM tomography and X-ray energy dispersive spectrometry（XEDS）-STEM tomography, and so on. The optimized tilt series such as dual-axis tilt tomography, on-axis tilt tomography, conical tilt tomography and equally-sloped tomography（EST） were reported. The advanced reconstruction algorithms, such as discrete algebraic reconstruction technique（DART）, compressed sensing（CS） algorithm and EST were overviewed. At last, the development tendency of ET in materials science was presented.

Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of AuCu_3-type sublattice system

Taking AuCu3-type sublattice system as an example, three discoveries have been presented: First, the third barrier hindering the progress in metal materials science is that researchers have got used to recognizing experimental phenomena of alloy phase transitions during extremely slow variation in temperature by equilibrium thinking mode and then taking erroneous knowledge of experimental phenomena as selected information for establishing Gibbs energy function and so-called equilibrium phase diagram. Second, the equilibrium holographic network phase diagrams of AuCu3-type sublattice system may be used to describe systematic correlativity of the composition?temperature-dependent alloy gene arranging structures and complete thermodynamic properties, and to be a standard for studying experimental subequilibrium order-disorder transition. Third, the equilibrium transition of each alloy is a homogeneous single-phase rather than a heterogeneous two-phase, and there exists a single-phase boundary curve without two-phase region of the ordered and disordered phases; the composition and temperature of the top point on the phase-boundary curve are far away from the ones of the critical point of the AuCu3 compound.

Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of Au_3Cu-type sublattice system

Taking Au3Cu-type sublattice system as an example, three discoveries have been presented. First, the fourth barrier to hinder the progress of metal materials science is that today’s researchers do not understand that the Gibbs energy function of an alloy phase should be derived from Gibbs energy partition function constructed of alloy gene sequence and their Gibbs energy sequence. Second, the six rules for establishing alloy gene Gibbs energy partition function have been discovered, and it has been specially proved that the probabilities of structure units occupied at the Gibbs energy levels in the degeneracy factor for calculating configuration entropy should be degenerated as ones of component atoms occupied at the lattice points. Third, the main characteristics unexpected by today’s researchers are as follows. There exists a single-phase boundary curve without two-phase region coexisting by the ordered and disordered phases. The composition and temperature of the top point on the phase-boundary curve are far away from those of the critical point of the Au3Cu compound; At 0 K, the composition of the lowest point on the composition-dependent Gibbs energy curve is notably deviated from that of the Au3Cu compounds. The theoretical limit composition range of long range ordered Au3Cu-type alloys is determined by the first jumping order degree.

Holographic alloy positioning design system and holographic network phase diagrams of Au-Cu system

Taking Au?Cu system as an example, three discoveries and two methods were presented. First, a new way for boosting sustainable progress of systematic metal materials science (SMMS) and alloy gene engineering (AGE) is to establish holographic alloy positioning design (HAPD) system, of which the base consists of measurement and calculation center, SMMS center, AGE center, HAPD information center and HAPD cybernation center; Second, the resonance activating-sychro alternating mechanism of atom movement may be divided into the located and oriented diffuse modes; Third, the equilibrium and subequilibrium holographic network phase diagrams are blueprints and operable platform for researchers to discover, design, manufacture and deploy advanced alloys, which are obtained respectively by the equilibrium lever numerical method and cross point numerical method of isothermal Gibbs energy curves. As clicking each network point, the holographic information of three structure levels for the designed alloy may be readily obtained: the phase constitution and fraction, phase arranging structure and properties of organization; the composition, alloy gene arranging structure and properties of each phase and the electronic structures and properties of alloy genes. It will create a new era for network designing advanced alloys.

私立{しりつ、ゎたくしりつ}类词汇

1、较差/最高与最低、最大与最小的对比差距格差/价格、资格、等级、经济、文化程度等的差距「较差」本来应读作,为了区别于「格差」而读作。 2、私立/私立 直立/市立 「私立」「市立」都读作,很容易混淆。

游艺宫

一、读者朋友,请您在每句古诗后的括号内填上原字,连起来是本刊对您的新年祝福。 独有咏诗张太( )[唐·白居易] 把君诗卷灯前( )[唐·白居易] 一生自是悠悠( )[唐·高适] 处处繁华满目( )[唐·权德舆]

编者絮语

本期《音乐世界》出刊之时,正值“中国教师节”的喜庆日子,我们谨向广大教师,尤其中小学音乐教师致以节日的问候、崇高的敬意和良好的祝愿!都说孩子们是祖国的明天,你们正是在为缔造祖国美好的明天而辛勤工作。祖国和人民感谢你们!

海南岛树木资源(续4)

海南岛树木资源（续４）黄世满谢国干（海南大学）被子植物亚门ＡＮＧＩＯＳＰＥＲＭＡＥ双子叶植物纲ＤＩＣＯＴＹＬＥＤＯＮＥＡＥ海桑科ＳＯＮＮＥＲＡＴＩＡＣＥＡＥ△八宝树（Ｄｕａｂａｎｇａｇｒａｎｄｉｆｌｏｒａ（ＲｏｘｂｅｘＤＣ）Ｗａｌｐ（Ｄｓｏｎ...

新郑市化肥厂统计工作积极参与企业经营管理

新郑市化肥厂是一家骨干工业企业,现有职工696人,固定资产2750万元。1994年全年完成工业产值4197万元,比上年增长57.6%,销售产值4178万元,产销率高达99.5%,实现利润30.7万元,是上年的2.8倍。该厂在当前激烈的市场竞争中能取得这样好的成绩,与他们重视统计工作,用准确的统计信息指导企业生产经营分不开。他们的具体做法是:1.建立完善的统计信息网络。试厂设立了统计科,设有两名专职统计人员,负责组织协调全厂各车间、科室的统计工作。各车间科室都设有一名专、兼职统计人员。

丙烯酸-2,4,6-三硝基苯乙酯的合成及热分解

以TNT、甲醛为原料,在弱碱性条件下反应合成得到2,4,6-三硝基苯乙醇(PicCH2CH2OH);PicCH2CH2OH在浓硫酸催化下和丙烯酸在甲苯中回流反应24h,合成得到丙烯酸-2,4,6-三硝基苯乙酯,产率为62%。采用紫外可见光谱(UV-Vis)、核磁共振氢谱(1HNMR)、红外光谱(FTIR)、质谱(MS)以及元素分析等对产物结构进行了表征。利用热重分析(TG)对产物热稳定性进行了研究,采用Kissinger方法和Ozawa方法计算其热分解活化能Ea分别为99.78,102.96kJ·mol-1。

A Preliminary Survey on Pest of Bamboo in Yunnan Province

In order to improve the development step of bamboo industry, the pest investigation was done in Yunnan Province from 2000, and 1 500 specimens were collected. Basing on the investigation and the date of recordation, there had 224 species pests, belonging to 7 orders and 49 families. Among the pest, most done harm to the bamboo slightly, except Omphisa sp., Pantana phyllostachysae and Cyrtotrachelus buqueti. The disease and pest of bamboo should be investigated in whole province systematically.

仙人掌王国—墨西哥

世界上仙人掌约有1000余种,墨西哥就占近600种。这里的仙人掌千姿百态,美不胜收。墨西哥有种巨人仙人掌,高达17米,重达12吨,令人叹为观止。墨西哥人视仙人掌为神明,顶礼膜拜。据墨西哥史书记载,很久以前,墨西哥北方的游牧民族阿兹特克南迁时得到了神的启示:当看到一只兀鹰叼着一条蛇停在仙人掌上的时候,那里就是吉祥之地。某日阿兹特克人来到墨西哥中部高原,果真看到了神灵所启示的情景。

Microstructure and mechanical property of 2024/3003 gradient aluminum alloy

gradient aluminum alloy was prepared by semi-continuous casting using double-stream-pouring technique. The microstructures of the as-cast, pressed and heat-treated alloys were analyzed by scanning electron microscope and transmission electron microscope. And the mechanical properties of the alloy in pressed and heat-treated states were studied. The results show that the ingots with diameter of 65 mm and external thickness （about） 5.5 mm are obtained when the temperatures of the melt in the internal and external ladles are 1 023 and 1 003 K, respectively, and the nozzle diameter is 2.0 mm. The microstructures of the as-cast alloy consist of α（Al）+（θ（CuAl2））+S（Al2CuMg） in the internal region and （α（Al）+MnAl6） in the external region. The phases found in the internal and external layers coexist in the transition zone. The transition layer is maintained after plastic deformation and heat treatment of the alloy. The tensile strength, yield strength and elongation of the alloy are 300 MPa, 132 MPa and 16.0%, respectively, after T6 treatment. The tensile and yield strength are increased by 150.0% and （94.1%,） respectively, compared with that of 3003 aluminum alloy. The maximum hardness in the internal region of 2024/3003 gradient aluminum alloy can be increased from HRF 55 in the pressed state to HRF 70 in the heat-treated state.

Effect of TYLCV Infection on Leaf Anatomical Structure and Protective Enzyme System of Tomato

[Objective] The aim was to study the effect of tomato yellow leaf curl virus （TYLCV） infection on leaf anatomical structure and protective enzyme system of tomato. [Method] The anatomical structure of infected and healthy leaves of tomato were observed and compared by using paraffin section method. The activity changes of SOD, POD and CAT in the infected leaves of tomato were determined. [ Result] The results revealed that there were some differences in anatomical structure between healthy and infected leaves. Some cells of infected leaves were damaged so that the leaves curled and became yellow, which affected the normal function of organs. Compared with control, enzyme activities in the tomato plants infected by TYLCV were enhanced at the early periods and higher than that in control, then started to decline at the middle and late periods but lower than that in control.[ Conclusion] After infection by TYLCV, the leaf anatomical structure of tomato was changed greatly and the protective enzyme system was damaged severely, and affected the normal physJological metabolic functions of tissues and organs in tomato in further.

Effect of the Thickess on Color of Porcelain Laminate Veneer

Objective : To evaluate the color change of the two-layer porcelain laminate veneer after adding veneering porcelain of different thickness to the 0. 2 mm thick aluminum oxide. Methods : Ten aluminum oxide disks were randomized into 2 groups. Each of five disks was veneered with Vita Lumin Shade 54 porcelain of thickness 0/0.4 mm and 0. 6 mm respectively. The L'a'b* color notations of the substrate covered with nan-veneered disks and 2 thickness porcelain veneered disks were measured separately and the color differences (AE) were calculated. Results ?Statistically significant differences in color coordinates of dark substrates were recorded after the substrate was covered by an aluminum oxide disk and also after the addition of veneering porcelain to the aluminum oxide disks in group 1 (P=0. 000 2) and group 2(P=0. 007 5) and between 2 groups (P=0. 000 1). Conclusion -The ability of masking underlying discoloration was increased and shifted to gray when the thickness of veneering porcelain increased.

Issues in Freeze Drying of Aqueous Solutions

Freeze drying or lyophilization of aqueous solutions is widely used in pharmaceutical industry. The in-creased importance Of the process is gaining a worldwide interest of research. A growing body of literature has demonstrated that the scientific approach can result in improved product quality with minimum trial and error em-piricism. Formulation and process development need a systematical understanding of the physical chemistry of freezing and freeze drying, material science and mechanisms of heat and mass transfer. This paper presents an overview on freeze ding of aqueous solutions based on publications in the past few decades. The important issuesof the process are analyzed.

SWELLING AND WETTABILITY OF LIGHT-CURED METHACRYLATE-BASED DENTAL RESINS PREPARED FROM CHOLIC ACID

2＇-methacryloxy-3α, 7α, I2α- trimethacryloyl cholic acid ethyl ester （CAGE4MA） has been prepared from cholic acid. Photo-polymeric resins were prepared from CAGE4MA. 2,2-bis[4-（2-hydroxy-3-methacrylyloxypropoxy）phenyllpropane （bis-GMA） was used for comparison, triethyleneglycol dimethacrylate （TEGDMA） was used as diluent. The polymerization was initiated by camphoroquinone （CQ）/N, N-dimethylaminoethyl methacrylate （DMAEMA） system. The conversion of CAGE4MA was 39% when the reaction time is 60s, which is lower than bis-GMA and TEGDMA. The swelling value of CAGE4MA resin was 0.41% in distilled water, which is much lower than those of bis-GMA resin （2.04%） and TEGDMA resin （4.77%） under the same conditions. Copolymers from CAGE4MA and TEGDMA have been prepared. With the increase of TEGDMA in mixture, the degree of conversion of CA GE4MA and swelling value increased. The swelling values of photocured resins in 0.1mol/L HCl were also measured.

Metamaterials: Reshape and Rethink

Metamaterials are composite materials whose material properties(acoustic, electrical, magnetic, or optical, etc.) are determined by their constitutive structural materials, especially the unit cells. The development of metamaterials continues to redefine the boundaries of materials science. In the field of electromagnetic research and beyond, these materials offer excellent design flexibility with their customized properties and their tunability under external stimuli. In this paper, we first provide a literature review of metamaterials with a focus on the technology and its evolution. We then discuss steps in the industrialization process and share our own experience.