[Objective] This study aimed to explore the impact of climate change on wheat cropping by using province-specific historical data during 1996-2007. [Method] We established a panel data econometric model with lagged wh...[Objective] This study aimed to explore the impact of climate change on wheat cropping by using province-specific historical data during 1996-2007. [Method] We established a panel data econometric model with lagged wheat cropping area and province-specific fixed-effects model to control the unobserved factors. [Result] The results showed that the temperature positively affects wheat cropping area, while precipitation does not have such impact. [Conclusion] The study provided empirical evidence for analysis of the determinants of wheat cropping area in China.展开更多
The predictive deconvolution algorithm （PD）, which is based on second-order statistics, assumes that the primaries and the multiples are implicitly orthogonal. However, the seismic data usually do not satisfy this a...The predictive deconvolution algorithm （PD）, which is based on second-order statistics, assumes that the primaries and the multiples are implicitly orthogonal. However, the seismic data usually do not satisfy this assumption in practice. Since the seismic data （primaries and multiples） have a non-Gaussian distribution, in this paper we present an improved predictive deconvolution algorithm （IPD） by maximizing the non-Gaussianity of the recovered primaries. Applications of the IPD method on synthetic and real seismic datasets show that the proposed method obtains promising results.展开更多
This paper considers the optimal replacement problem of a repairable system consisting of one component and a single repairman, assume that the system after repair is not 'as good as new', by using the geometr...This paper considers the optimal replacement problem of a repairable system consisting of one component and a single repairman, assume that the system after repair is not 'as good as new', by using the geometric process, we consider a placement policy T based on the age of the system. The problem is to determine the optimal replacement policy T * such that the long_run expected benefit per unit time is maximized. Also, the explicit expression of the long_run expected benefit per unit time can be found. In some conditions, the existence and uniqueness of the optimal policy T * can be proved, finally, we prove that the policy T * is better than the policy T * in .展开更多
Ni-TiN nanocomposite films were produced from a Ni plating bath containing TiN nanoparticles by using dc electroplating method. The structure and surface morphology of Ni-TiN composite coatings were analyzed by atom f...Ni-TiN nanocomposite films were produced from a Ni plating bath containing TiN nanoparticles by using dc electroplating method. The structure and surface morphology of Ni-TiN composite coatings were analyzed by atom force microscope, X-ray diffraction, and trans- mission electron microscopy. Meanwhile, the anti-corrosion properties, hardness and ther- mostability of Ni-TiN nanocomposite films were also investigated and compared with the traditional polycrystalline Ni coatings. The results show that, compared with the traditional polycrystalline Ni film, Ni-TiN nanocomposite coatings display much better corrosion resistance, higher film hardness, and thermal stability. In addition, the hardness of Ni-TiN nanocomposite coatings decreases slightly with the increase of electroplating current density, which may be due to the synergism of hydrogen evolution and faster nucleation/growth rate of nickel crystallites.展开更多
Nanocrystalline nickel coating was prepared by flexible friction assisted electrodeposition technology in an additive-free Watts bath.The coating consists of massive equiaxial crystals with an average grain size of ab...Nanocrystalline nickel coating was prepared by flexible friction assisted electrodeposition technology in an additive-free Watts bath.The coating consists of massive equiaxial crystals with an average grain size of about 24 nm and exhibits a（111） preferred orientation.The differential scanning calorimetry（DSC） analysis of nanocrystalline nickel demonstrates that the peak temperature of rapid grain growth is about 285.4 °C,and the peak temperature of grain growth towards equilibrium is around 431.5 °C.The isochronous annealing results reveal that abnormal grain growth behavior is not observed in nanocrystalline nickel without sulfur-containing.The thermal stability of the deposition was improved due to its initial microstructure of the as-deposited nickel and a certain amount of annealing nano-twins with low-energy,which reduces the driving force for grain growth.Consequently,the coating shows a low residual tensile stress of about 50 MPa and a high microhardness of HV 400 at the annealing temperature of 450 °C.展开更多
Let k be a commutative ring, C a projective k-coalgebra. The smash productsof entwining structure (A, C)_ψ are discussed. When the map ψ is a bijective, and C is a finitelygenerated k-module, a version of the Ulbric...Let k be a commutative ring, C a projective k-coalgebra. The smash productsof entwining structure (A, C)_ψ are discussed. When the map ψ is a bijective, and C is a finitelygenerated k-module, a version of the Ulbrich theorem for coalgebras C is given.展开更多
Some sufficient and necessary conditions are given for the equivalence between two crossed product actions of Hopf algebra H on the same linear category, and the Maschke theorem is generalized. Based on the result of ...Some sufficient and necessary conditions are given for the equivalence between two crossed product actions of Hopf algebra H on the same linear category, and the Maschke theorem is generalized. Based on the result of the crossed product in the classic Hopf algebra theory, first, let A be a k-linear category and H be a Hopf algebra, and the two crossed products A#_σH and A#＇_σH are isomorphic under some conditions. Then, let A#_σH be a crossed product category for a finite dimensional and semisimple Hopf algebra H. If V is a left A#σH-module and WC V is a submodule such that W has a complement as a left A-module, then W has a complement as a A#_σH-module.展开更多
Aim To extend several fundamental theorems of conventional elasticity theory to quasicrystalelasticity theory. Methods The basic governing equations of quasicrystal elasticity theory and Gauss's theorem were appli...Aim To extend several fundamental theorems of conventional elasticity theory to quasicrystalelasticity theory. Methods The basic governing equations of quasicrystal elasticity theory and Gauss's theorem were applied in the derivation. Results and Conclusion The principle of virtual work, Betti's reciprocal theorem and the uniqueness theorem of quasicrystal elasticity theory are proud, and some conservative integrals in quasicrystal elasticty theory are obtained.展开更多
An 8 mm-high NiCoCrAlYTa coating was epitaxially built-up on a directionally solidified (DS) Ni-based superalloy blade tip by electro-spark deposition.Epitaxial morphologies of the coating and its microstructural char...An 8 mm-high NiCoCrAlYTa coating was epitaxially built-up on a directionally solidified (DS) Ni-based superalloy blade tip by electro-spark deposition.Epitaxial morphologies of the coating and its microstructural characteristics were investigated by means of SEM,XRD and TEM etc.It is observed that the fine column-like dendrites originated from the γ'-particles or γ'-clusters of the DS substrate and are un-continuously coarsened.The β-phase particles precipitate and grow eutectically with the γ-phase.The orientation of fine column dendrites depends on electro-spark deposition processing parameters and the microstructure can be characterized with superfine γ and β phases.展开更多
Using the observed daily temperatures from 756 stations in China during the period from 1951 to 2009 extensive and persistent extreme cold events (EPECEs) were defined according to the following three steps:1) a stati...Using the observed daily temperatures from 756 stations in China during the period from 1951 to 2009 extensive and persistent extreme cold events (EPECEs) were defined according to the following three steps:1) a station was defined as an extreme cold station (ECS) if the observed temperature was lower than its 10th percentile threshold;2) an extensive extreme cold event was determined to be present if the approximated area occupied by the ECSs was more than 10% of the total area of China (83rd percentile) on its starting day and the maximum area occupied by the ECSs was at least 20% of the total area of China (96th percentile);and 3) an EPECE was determined to be present if the extensive extreme cold event lasted for at least for eight days.52 EPECEs were identified in this manner,and these identification results were also verified using other reliable data.On the basis of cluster analysis,five types of EPECEs were classified according to the spatial distribution of ECSs at their most extensive time over the course of the EPECE.展开更多
Based on our previous paper (Commun.Theor.Phys.39 (2003) 417) we derive the convolution theoremof fractional Fourier transformation in the context of quantum mechanics,which seems a convenient and neat way.Generalizat...Based on our previous paper (Commun.Theor.Phys.39 (2003) 417) we derive the convolution theoremof fractional Fourier transformation in the context of quantum mechanics,which seems a convenient and neat way.Generalization of this method to the complex fractional Fourier transformation case is also possible.展开更多
A facile method was proposed to prepare stretchable silver-based composite coatings with excellent conductivity and stability for flexible electronics.Silver coating was firstly deposited on thermoplastic polyurethane...A facile method was proposed to prepare stretchable silver-based composite coatings with excellent conductivity and stability for flexible electronics.Silver coating was firstly deposited on thermoplastic polyurethane(TPU)elastomer rubber surface via two-component spraying technique,then the superhydrophobic surface was obtained by one-step electrodeposition of cerium compounds(CeM)and graphene nanosheets(GNS)to produce Ag/CeM/GNS composite coatings.The obtained Ag/CeM/GNS composite coatings maintained high conductivity after experiencing bending cycles and stretching cycles.Furthermore,the as-prepared Ag/CeM/GNS composite coatings showed excellent self-cleaning and anti-fouling properties,and the corrosion resistance has improved significantly compared to the original Ag coating.In addition,the Ag/CeM/GNS composite coatings could drive the circuit normally in the states of tensile,bending and twisting deformation,showing excellent mechanical stability and applicability.As a result,it is believed that the prepared Ag/CeM/GNS composite coatings with excellent conductivity and stability have promising applications for flexible electronics in harsh conditions.展开更多
基金Supported by the National Natural Science Foundation of China (41101165)~~
文摘[Objective] This study aimed to explore the impact of climate change on wheat cropping by using province-specific historical data during 1996-2007. [Method] We established a panel data econometric model with lagged wheat cropping area and province-specific fixed-effects model to control the unobserved factors. [Result] The results showed that the temperature positively affects wheat cropping area, while precipitation does not have such impact. [Conclusion] The study provided empirical evidence for analysis of the determinants of wheat cropping area in China.
基金National 863 Foundation of China(No.2006AA09A102-10)National Natural Science Foundation of China(No.40874056)NCET Fund
文摘The predictive deconvolution algorithm （PD）, which is based on second-order statistics, assumes that the primaries and the multiples are implicitly orthogonal. However, the seismic data usually do not satisfy this assumption in practice. Since the seismic data （primaries and multiples） have a non-Gaussian distribution, in this paper we present an improved predictive deconvolution algorithm （IPD） by maximizing the non-Gaussianity of the recovered primaries. Applications of the IPD method on synthetic and real seismic datasets show that the proposed method obtains promising results.
文摘This paper considers the optimal replacement problem of a repairable system consisting of one component and a single repairman, assume that the system after repair is not 'as good as new', by using the geometric process, we consider a placement policy T based on the age of the system. The problem is to determine the optimal replacement policy T * such that the long_run expected benefit per unit time is maximized. Also, the explicit expression of the long_run expected benefit per unit time can be found. In some conditions, the existence and uniqueness of the optimal policy T * can be proved, finally, we prove that the policy T * is better than the policy T * in .
文摘Ni-TiN nanocomposite films were produced from a Ni plating bath containing TiN nanoparticles by using dc electroplating method. The structure and surface morphology of Ni-TiN composite coatings were analyzed by atom force microscope, X-ray diffraction, and trans- mission electron microscopy. Meanwhile, the anti-corrosion properties, hardness and ther- mostability of Ni-TiN nanocomposite films were also investigated and compared with the traditional polycrystalline Ni coatings. The results show that, compared with the traditional polycrystalline Ni film, Ni-TiN nanocomposite coatings display much better corrosion resistance, higher film hardness, and thermal stability. In addition, the hardness of Ni-TiN nanocomposite coatings decreases slightly with the increase of electroplating current density, which may be due to the synergism of hydrogen evolution and faster nucleation/growth rate of nickel crystallites.
基金Project(51005244)supported by the National Natural Science Foundation of ChinaProject(2011CB013405)supported by the Basic Research Development Program of China
文摘Nanocrystalline nickel coating was prepared by flexible friction assisted electrodeposition technology in an additive-free Watts bath.The coating consists of massive equiaxial crystals with an average grain size of about 24 nm and exhibits a（111） preferred orientation.The differential scanning calorimetry（DSC） analysis of nanocrystalline nickel demonstrates that the peak temperature of rapid grain growth is about 285.4 °C,and the peak temperature of grain growth towards equilibrium is around 431.5 °C.The isochronous annealing results reveal that abnormal grain growth behavior is not observed in nanocrystalline nickel without sulfur-containing.The thermal stability of the deposition was improved due to its initial microstructure of the as-deposited nickel and a certain amount of annealing nano-twins with low-energy,which reduces the driving force for grain growth.Consequently,the coating shows a low residual tensile stress of about 50 MPa and a high microhardness of HV 400 at the annealing temperature of 450 °C.
文摘Let k be a commutative ring, C a projective k-coalgebra. The smash productsof entwining structure (A, C)_ψ are discussed. When the map ψ is a bijective, and C is a finitelygenerated k-module, a version of the Ulbrich theorem for coalgebras C is given.
基金The National Natural Science Foundation of China(No.11371088)the Natural Science Foundation of Jiangsu Province(No.BK2012736)+1 种基金the Fundamental Research Funds for the Central Universitiesthe Research Innovation Program for College Graduates of Jiangsu Province(No.KYLX15_0109)
文摘Some sufficient and necessary conditions are given for the equivalence between two crossed product actions of Hopf algebra H on the same linear category, and the Maschke theorem is generalized. Based on the result of the crossed product in the classic Hopf algebra theory, first, let A be a k-linear category and H be a Hopf algebra, and the two crossed products A#_σH and A#＇_σH are isomorphic under some conditions. Then, let A#_σH be a crossed product category for a finite dimensional and semisimple Hopf algebra H. If V is a left A#σH-module and WC V is a submodule such that W has a complement as a left A-module, then W has a complement as a A#_σH-module.
文摘Aim To extend several fundamental theorems of conventional elasticity theory to quasicrystalelasticity theory. Methods The basic governing equations of quasicrystal elasticity theory and Gauss's theorem were applied in the derivation. Results and Conclusion The principle of virtual work, Betti's reciprocal theorem and the uniqueness theorem of quasicrystal elasticity theory are proud, and some conservative integrals in quasicrystal elasticty theory are obtained.
基金Projects(50671116,50901081) supported by the National Natural Science Foundation of China
文摘An 8 mm-high NiCoCrAlYTa coating was epitaxially built-up on a directionally solidified (DS) Ni-based superalloy blade tip by electro-spark deposition.Epitaxial morphologies of the coating and its microstructural characteristics were investigated by means of SEM,XRD and TEM etc.It is observed that the fine column-like dendrites originated from the γ'-particles or γ'-clusters of the DS substrate and are un-continuously coarsened.The β-phase particles precipitate and grow eutectically with the γ-phase.The orientation of fine column dendrites depends on electro-spark deposition processing parameters and the microstructure can be characterized with superfine γ and β phases.
基金supportedby the National Key Technologies R&D Program of China (Grant No. 2009BAC51B02)the Special Funds for Meteorology Scientific Research on Public Cause (Grant No. GYHY201106015)
文摘Using the observed daily temperatures from 756 stations in China during the period from 1951 to 2009 extensive and persistent extreme cold events (EPECEs) were defined according to the following three steps:1) a station was defined as an extreme cold station (ECS) if the observed temperature was lower than its 10th percentile threshold;2) an extensive extreme cold event was determined to be present if the approximated area occupied by the ECSs was more than 10% of the total area of China (83rd percentile) on its starting day and the maximum area occupied by the ECSs was at least 20% of the total area of China (96th percentile);and 3) an EPECE was determined to be present if the extensive extreme cold event lasted for at least for eight days.52 EPECEs were identified in this manner,and these identification results were also verified using other reliable data.On the basis of cluster analysis,five types of EPECEs were classified according to the spatial distribution of ECSs at their most extensive time over the course of the EPECE.
基金National Natural Science Foundation of China under Grant No.10775097
文摘Based on our previous paper (Commun.Theor.Phys.39 (2003) 417) we derive the convolution theoremof fractional Fourier transformation in the context of quantum mechanics,which seems a convenient and neat way.Generalization of this method to the complex fractional Fourier transformation case is also possible.
基金support from the National Natural Science Foundation of China(No.52105186)the Guangdong Basic and Applied Basic Research Foundation,China(Nos.2019A1515011282,2022A1515011547,2021B1515120014)the Fangchenggang Scientific Research and Technology Development Project,China(No.AB21014008).
文摘A facile method was proposed to prepare stretchable silver-based composite coatings with excellent conductivity and stability for flexible electronics.Silver coating was firstly deposited on thermoplastic polyurethane(TPU)elastomer rubber surface via two-component spraying technique,then the superhydrophobic surface was obtained by one-step electrodeposition of cerium compounds(CeM)and graphene nanosheets(GNS)to produce Ag/CeM/GNS composite coatings.The obtained Ag/CeM/GNS composite coatings maintained high conductivity after experiencing bending cycles and stretching cycles.Furthermore,the as-prepared Ag/CeM/GNS composite coatings showed excellent self-cleaning and anti-fouling properties,and the corrosion resistance has improved significantly compared to the original Ag coating.In addition,the Ag/CeM/GNS composite coatings could drive the circuit normally in the states of tensile,bending and twisting deformation,showing excellent mechanical stability and applicability.As a result,it is believed that the prepared Ag/CeM/GNS composite coatings with excellent conductivity and stability have promising applications for flexible electronics in harsh conditions.
