There are a number of design procedures which have been developed to determine the appropriate thickness of trackbed layers on a railway track in order to reduce train induced stresses to an acceptable level thus ensu...There are a number of design procedures which have been developed to determine the appropriate thickness of trackbed layers on a railway track in order to reduce train induced stresses to an acceptable level thus ensuring that subgrade failure does not occur prematurely. This paper briefly describes four such procedures and compares the thickness of trackbed layers proposed by each for a number of hypothetical situations. To demonstrate further the suitability of each procedure, two existing sites in the UK are analysed and the trackbed layer thickness given by each procedure is then compared. The research shows that the procedures do not give consistent results. Subsequently it is suggested that it is important to consider other aspects in addition to the prescription of a suitable thickness of trackbed layers in any new build, renewal or remediation scheme.展开更多
A cryptosystem with non-commutative platform groups based on conjugator search problem was recently introduced at Neural Computing and Applications 2016. Its versatility was illustrated by building a public-key encryp...A cryptosystem with non-commutative platform groups based on conjugator search problem was recently introduced at Neural Computing and Applications 2016. Its versatility was illustrated by building a public-key encryption scheme. We propose an algebraic key-recovery attack in the polynomial computational complexity. Furthermore, we peel off the encryption and decryption process and propose attack methods for solving the conjugator search problem over the given non-abelian group. Finally, we provide corresponding practical attack examples to illustrate the attack methods in our cryptanalysis, and provide some improved suggestions.展开更多
This paper deals with new and innovative case studies of application of post-tensioning for restoration of structures for buildings, bridges and rock stabilization in India. In earlier situations for these types of ca...This paper deals with new and innovative case studies of application of post-tensioning for restoration of structures for buildings, bridges and rock stabilization in India. In earlier situations for these types of cases conventional method of repair and rehabilitation has been used. These innovative approaches for restoration have led to enormous saving of cost and time. The advantages of post tensioning are well known in the civil industry and are being used for the last 40 to 50 years. Post tensioning is one of the best methods to induce stresses in the concrete before application of live load and this technique can also be widely used for restoration and rehabilitation of structures. Unlike the use of post-tensioning in new structures there are no definite methods or codes for application in restoration and rehabilitation of structures. For restoration and rehabilitation of structures, PT （post tensioned） technique can be applied in combination with other techniques and materials available. Bridge lifting is a tricky and risky job especially when the superstructure is displaced appreciably by a natural calamity, etc.. Not only the present state of structure needs proper study before commencement of restoration and rehabilitation but also calls for careful execution. This paper deals with case studies of innovative applications of post tensioning in restoration and rehabilitation of structures and restoration of bridge structure in Andaman ＆ Nicobar Island, India affected by Sumatra quake.展开更多
For many years, computer systems have emerged; they now occupy an important place in our daily lives. The growing needs and ever increasing use of computer systems have made application development more and more compl...For many years, computer systems have emerged; they now occupy an important place in our daily lives. The growing needs and ever increasing use of computer systems have made application development more and more complicated, The complexity of these applications poses problems such as reuse, installation, administration and evolution of applications. The development of applications is related to the evolution of paradigms and approaches to developing them. This paper presents different approaches and paradigms of development starting with the procedural approach, coming up for service, through the component and object-oriented approaches. Also, for each of the approaches we determine the advantages and limitations.展开更多
Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of th...Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of the EBA are： energy 0.5 to 1.5 MeV; beam current： 0.3 to 25.0 mA; beam scanning： 60 to 120 cm; beam width： 25.4 mm and frequency： 100 Hz. Nowadays, this accelerator has been used for innumerable applications, such as： For sterilization of medical, pharmaceutical and biological products, treatment of industrial and domestic effluents and sludge, preservation and disinfestations of foods and agricultural products. Other important application are lignocellulosic material irradiation as a pre-treatment to produce ethanol bio-fuel, decontamination of pesticide packing, solid residues remediation, organic compounds removal from wastewater, treatment of effluent from petroleum production units, crosslinking of foams, wires and electric cables. Electron accelerator JOB 188 is, also, very important composite and nanocomposite materials and carbon fibers irradiation, irradiated grafting ion-exchange membranes for fuel cells application, natural polymers and multilayer packages irradiation and biodegradable blends production. The energy of the electron beam is calculated as a function of the current in the accelerator high-voltage divisor, taking into account the thickness and density of the material to be irradiated. This energy is calculated considering the electron through the entire material and the distance from the titanium foil window, so that the absorbed doses at the points of entrance and exit are equivalent on the material. The dose is directly proportional to the beam current and the exposure time of the material under the electron beam and inversely proportional to the scan width. The aim of this paper is to analyze the power system parameters of the EBA Dynamitron DC 1500/25/04, such as, voltage and RMS （Root-mean-square） current in the oscillator system, high voltage generator and waveform. For this purpose software developed in the Radiation Technology Center at IPEN/CNEN-SP to simulate the energy efficiency of this industrial accelerator. Finally, it is also targeted to compare theoretical dosimetry using parameters of energy and beam current with data from the accelerator power system. This knowledge and technology will be very useful and essential for the control system upgrade of EBA, mainly Dynamitron DC 1500/25/04 taking into consideration that radiation processing technology for industrial and environmental applications has been developed and used worldwide.展开更多
This paper presented a numerical approach to solving the problem of a flat-ended punch in contact with a half-space matrix embedded with multiple three dimensional arbitrary-shaped inhomogeneities.Based on the semi-an...This paper presented a numerical approach to solving the problem of a flat-ended punch in contact with a half-space matrix embedded with multiple three dimensional arbitrary-shaped inhomogeneities.Based on the semi-analytical method(SAM)and the equivalent inclusion method,numerical procedures were developed and the effects of inclusion shape and distribution were analyzed.Fast Fourier transform technique was implemented to accelerate the calculation of surface deformation and subsurface stress.Interactions of inter-inclusions and inclusion-matrix were taken into account.Numerical results showed the presence of inhomogeneities(i.e.,microstructures in solids)indeed had a great effect on local contact pressure and a strong disturbance to the subsurface stress field in the vicinity of inclusions.The effects were dependent on the shape and distribution of inclusions and inter-inclusion interactions.The physical significance of this study is to provide an insight into the relation between the material microstructure and its response to the external load,and the solution approach and procedures may find useful applications,for example,the analysis of fatigue and crack propagation for composite materials,prediction of stress field in solids containing material defects,and study of the mechanism of chemical-mechanical polish(CMP)for inhomogeneous materials,etc.展开更多
Highly sensitive and selective detection against specific target gases, especially at low-ppb （part per bil- lion） level, remain a great number of challenges in gas sensor applications. In this paper, we first prese...Highly sensitive and selective detection against specific target gases, especially at low-ppb （part per bil- lion） level, remain a great number of challenges in gas sensor applications. In this paper, we first present an ordered mesoporous NiFe204 for highly sensitive and selective detection against low-ppb toluene. A series of mesoporous NiFe204 materials were synthesized by templating from mesoporous silica KIT-6 and its framework thickness was reduced from 8.5 to 5 nm by varying the pore size of KIT-6 from 9.4 to 5.6 nm, accompanied with the increase of the specific surface area from 134 to 216 m^2 g^-1. The ordered mesoporous NiFe2O4 with both ultrathin framework of 5 nm and large specific surface area of up to 216 m^2 g^-1 exhibits a highest response （Rgas/Ralr-1 = 77.3） toward 1,000 ppb toluene at 230℃ and is nearly 7.3 and 76.7 times higher than those for the NiFe204 replica with thick framework and its bulk counter- part respectively, which also possesses a quite low limit of detection （〈2 ppb）, and good selectivity.展开更多
First of all, the definition of integrated industry is given from the perspective of complex systems; secondly, the factors of integrated industry are identified by the application of the hierarchical structure model ...First of all, the definition of integrated industry is given from the perspective of complex systems; secondly, the factors of integrated industry are identified by the application of the hierarchical structure model of the complex systems theory; thirdly, the characteristics of integrated industry are analyzed; finally, the problems which should be paid attention to in the process of integrated industry enumerated.展开更多
文摘There are a number of design procedures which have been developed to determine the appropriate thickness of trackbed layers on a railway track in order to reduce train induced stresses to an acceptable level thus ensuring that subgrade failure does not occur prematurely. This paper briefly describes four such procedures and compares the thickness of trackbed layers proposed by each for a number of hypothetical situations. To demonstrate further the suitability of each procedure, two existing sites in the UK are analysed and the trackbed layer thickness given by each procedure is then compared. The research shows that the procedures do not give consistent results. Subsequently it is suggested that it is important to consider other aspects in addition to the prescription of a suitable thickness of trackbed layers in any new build, renewal or remediation scheme.
基金supported by the State Key Program of National Natural Science of China(Grant Nos. 61332019)the National Natural Science Foundation of China (61572303)+7 种基金National Key Research and Development Program of China ( 2017YFB0802003 , 2017YFB0802004)National Cryptography Development Fund during the 13th Five-year Plan Period (MMJJ20170216)the Foundation of State Key Laboratory of Information Security (2017-MS-03)the Fundamental Research Funds for the Central Universities(GK201702004,GK201603084)Major State Basic Research Development Program of China (973 Program) (No.2014CB340600)National High-tech R&D Program of China(2015AA016002, 2015AA016004)Natural Science Foundation of He Bei Province (No. F2017201199)Science and technology research project of Hebei higher education (No. QN2017020)
文摘A cryptosystem with non-commutative platform groups based on conjugator search problem was recently introduced at Neural Computing and Applications 2016. Its versatility was illustrated by building a public-key encryption scheme. We propose an algebraic key-recovery attack in the polynomial computational complexity. Furthermore, we peel off the encryption and decryption process and propose attack methods for solving the conjugator search problem over the given non-abelian group. Finally, we provide corresponding practical attack examples to illustrate the attack methods in our cryptanalysis, and provide some improved suggestions.
文摘This paper deals with new and innovative case studies of application of post-tensioning for restoration of structures for buildings, bridges and rock stabilization in India. In earlier situations for these types of cases conventional method of repair and rehabilitation has been used. These innovative approaches for restoration have led to enormous saving of cost and time. The advantages of post tensioning are well known in the civil industry and are being used for the last 40 to 50 years. Post tensioning is one of the best methods to induce stresses in the concrete before application of live load and this technique can also be widely used for restoration and rehabilitation of structures. Unlike the use of post-tensioning in new structures there are no definite methods or codes for application in restoration and rehabilitation of structures. For restoration and rehabilitation of structures, PT （post tensioned） technique can be applied in combination with other techniques and materials available. Bridge lifting is a tricky and risky job especially when the superstructure is displaced appreciably by a natural calamity, etc.. Not only the present state of structure needs proper study before commencement of restoration and rehabilitation but also calls for careful execution. This paper deals with case studies of innovative applications of post tensioning in restoration and rehabilitation of structures and restoration of bridge structure in Andaman ＆ Nicobar Island, India affected by Sumatra quake.
文摘For many years, computer systems have emerged; they now occupy an important place in our daily lives. The growing needs and ever increasing use of computer systems have made application development more and more complicated, The complexity of these applications poses problems such as reuse, installation, administration and evolution of applications. The development of applications is related to the evolution of paradigms and approaches to developing them. This paper presents different approaches and paradigms of development starting with the procedural approach, coming up for service, through the component and object-oriented approaches. Also, for each of the approaches we determine the advantages and limitations.
文摘Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of the EBA are： energy 0.5 to 1.5 MeV; beam current： 0.3 to 25.0 mA; beam scanning： 60 to 120 cm; beam width： 25.4 mm and frequency： 100 Hz. Nowadays, this accelerator has been used for innumerable applications, such as： For sterilization of medical, pharmaceutical and biological products, treatment of industrial and domestic effluents and sludge, preservation and disinfestations of foods and agricultural products. Other important application are lignocellulosic material irradiation as a pre-treatment to produce ethanol bio-fuel, decontamination of pesticide packing, solid residues remediation, organic compounds removal from wastewater, treatment of effluent from petroleum production units, crosslinking of foams, wires and electric cables. Electron accelerator JOB 188 is, also, very important composite and nanocomposite materials and carbon fibers irradiation, irradiated grafting ion-exchange membranes for fuel cells application, natural polymers and multilayer packages irradiation and biodegradable blends production. The energy of the electron beam is calculated as a function of the current in the accelerator high-voltage divisor, taking into account the thickness and density of the material to be irradiated. This energy is calculated considering the electron through the entire material and the distance from the titanium foil window, so that the absorbed doses at the points of entrance and exit are equivalent on the material. The dose is directly proportional to the beam current and the exposure time of the material under the electron beam and inversely proportional to the scan width. The aim of this paper is to analyze the power system parameters of the EBA Dynamitron DC 1500/25/04, such as, voltage and RMS （Root-mean-square） current in the oscillator system, high voltage generator and waveform. For this purpose software developed in the Radiation Technology Center at IPEN/CNEN-SP to simulate the energy efficiency of this industrial accelerator. Finally, it is also targeted to compare theoretical dosimetry using parameters of energy and beam current with data from the accelerator power system. This knowledge and technology will be very useful and essential for the control system upgrade of EBA, mainly Dynamitron DC 1500/25/04 taking into consideration that radiation processing technology for industrial and environmental applications has been developed and used worldwide.
基金supported by the National Basic Research Program of China(Grant Nos.2009CB724200,2011CB013404 and 2011CB706602)
文摘This paper presented a numerical approach to solving the problem of a flat-ended punch in contact with a half-space matrix embedded with multiple three dimensional arbitrary-shaped inhomogeneities.Based on the semi-analytical method(SAM)and the equivalent inclusion method,numerical procedures were developed and the effects of inclusion shape and distribution were analyzed.Fast Fourier transform technique was implemented to accelerate the calculation of surface deformation and subsurface stress.Interactions of inter-inclusions and inclusion-matrix were taken into account.Numerical results showed the presence of inhomogeneities(i.e.,microstructures in solids)indeed had a great effect on local contact pressure and a strong disturbance to the subsurface stress field in the vicinity of inclusions.The effects were dependent on the shape and distribution of inclusions and inter-inclusion interactions.The physical significance of this study is to provide an insight into the relation between the material microstructure and its response to the external load,and the solution approach and procedures may find useful applications,for example,the analysis of fatigue and crack propagation for composite materials,prediction of stress field in solids containing material defects,and study of the mechanism of chemical-mechanical polish(CMP)for inhomogeneous materials,etc.
基金supported by the National First-Rate Discipline Construction Project of Ningxia(NXYLXK2017A04,2017CET02KY03,and 2017CET04KY05)the National Natural Science Foundation of China(51362024,21006116,and 51672138)+2 种基金the Foundation of State Key Laboratory of High-Efficiency Utilization of Coal and Green Chemical Engineering(2016–19)National Science Fund for Distinguished Young Scholars(21325105)the West Light Foundation of the Chinese Academy of Science
文摘Highly sensitive and selective detection against specific target gases, especially at low-ppb （part per bil- lion） level, remain a great number of challenges in gas sensor applications. In this paper, we first present an ordered mesoporous NiFe204 for highly sensitive and selective detection against low-ppb toluene. A series of mesoporous NiFe204 materials were synthesized by templating from mesoporous silica KIT-6 and its framework thickness was reduced from 8.5 to 5 nm by varying the pore size of KIT-6 from 9.4 to 5.6 nm, accompanied with the increase of the specific surface area from 134 to 216 m^2 g^-1. The ordered mesoporous NiFe2O4 with both ultrathin framework of 5 nm and large specific surface area of up to 216 m^2 g^-1 exhibits a highest response （Rgas/Ralr-1 = 77.3） toward 1,000 ppb toluene at 230℃ and is nearly 7.3 and 76.7 times higher than those for the NiFe204 replica with thick framework and its bulk counter- part respectively, which also possesses a quite low limit of detection （〈2 ppb）, and good selectivity.
基金This project is supported by National Natural Science Foundation of China（70773016）
文摘First of all, the definition of integrated industry is given from the perspective of complex systems; secondly, the factors of integrated industry are identified by the application of the hierarchical structure model of the complex systems theory; thirdly, the characteristics of integrated industry are analyzed; finally, the problems which should be paid attention to in the process of integrated industry enumerated.
