Remote State Preparation of a Greenberger-Horne-Zeilinger Class State

In this paper, we propose a scheme for the remote preparation of a three-particle Greenberger-HorneZeilinger class state by a two-particle entangled state and a three-particle entangled state. It is shown that, by this scheme, only two classical bits and one two-particle projective measurement are enough for such preparation.

An Equation of Stirling Numbers of the Second Kind

In this paper, We propose and prove the following equation, where {3^n} is a stirling number of the second kind, when n ≥ 3 is given.

Eros and Thanatos in the Psychical Process of Paul Morel： Diversity in Paul＇s Psyche

This paper attempts to analyze Paul Morel＇s instinctual drives--in D. H. Lawrence＇s Sons and Lovers （2006}---toward survival, neurotic refusal to accept life, and his will to give life meaning after a fierce and prolonged internal strife--in the light of psychoanalysis. It will explore how his ＂Id＂ strives to bring about the satisfaction of instinctual needs on the basis of the pleasure principle driving him to seek pleasure. His ＂libido＂--psychic energy, emanating from the id, especially the sexual urge--has empowered his ＂Eros＂ or life instinct. It will also explore how ＂Thanatos＂ or death instinct, in contrast, has yearned for an almost lifeless state and curbed entering into human relationships as experienced in his last rejection of Miriam after his mother＇s death leaving a great trauma on Paul who has been on the verse of extinction as a result. Therefore, Eros and Thanatos, both coincide and conflict within him, are dynamically involved and thus are interacted infusing life not stagnation in Paulin consequence

A unified approach of PID controller design for unstable processes with time delay

This paper addresses a unified approach of the PID controller design for low as well as high order unstable processes with time delay.The design method is based on the direct synthesis(DS)approach to achieve the enhanced load disturbance rejection.To improve the servo response,a two-degree of freedom control scheme has been considered.A suitable guideline has been provided to select the desired reference model in the DS scheme.The direct synthesis controller has been approximated to the PID controller using the frequency response matching method.A consistently better performance has been obtained in comparison with the recently reported methods.

Thematic Concept Analysis on the Embodiment to the Soul of Interior Design

Interior design is unable to attract people＇s attention without a thematic concept. However, it is a systematic project to determine a thematic concept of interior design, which should be fully prepared in advance, but never defined casually. In this paper, this topic is discussed. Therefore, this paper is of certain practical significance and guiding significance.

System design of a dexterous lightweight robot arm with remote control

This paper presents a novel remote controlled dexterous robot arm with 6 degrees of freedom （DOF）. As a highly integrated mechatronics system, sensors and their signal processing system are integrated inside each joint. To lighten the weight, almost all mechanical parts are made of aluminum and the robot control system is placed outside. The modular concept is adopted during the robot design process for time and cost saving. Considering the much greater torque acted on the two shoulder joints, the joint shells are strengthened in the design to increase joint stiffness and suppress system vibration. Meanwhile, to simplify the maintenance, a new spring pins electronic connector is designed to disassemble every joint, connector and link independently without cutting any cables. The teleoperation technology enables the robot to offer more convenient service definitely for people＇ s daily life. Virtual reality technology is used to solve the time delay problem during teleoperation. Finally, two typical daily chore experiments are implemented to prove the manipulation ability of the dexterous robot arm.

Cascade control based on minimum sensitivity in outer loop for processes with time delay

A new cascade control program was proposed based on modified internal model control to handle stable,unstable and integrating processes with time delay.The program had totally four controllers of which the secondary loop had two controllers and the primary loop had two controllers.The two secondary loop controllers were designed using IMC technique.They were decoupled completely and could be adjusted independently,which avoided the undesirable influence on performance of the primary controllers.The main controller in the primary loop was devised as a PID using the method of minimum sensitivity,which could guarantee not only the nominal performance but also the robust stability of the system.A setpoint filter was added in the primary loop to improve the tracking performance.All the controllers of the two closed-loops were designed analytically,and could be adjusted and optimized by single parameter respectively.Simulations were carried out on three various processes with time delay,and the results show that the proposed method can provide a better performance of both set-point tracking and disturbance rejection and robustness against parameters perturbation.

Toward Analytic Solution of Nonlinear Differential Difference Equations via Extended Sensitivity Approach

In this paper an efficient computational method based on extending the sensitivity approach(SA) is proposed to find an analytic exact solution of nonlinear differential difference equations.In this manner we avoid solving the nonlinear problem directly.By extension of sensitivity approach for differential difference equations(DDEs),the nonlinear original problem is transformed into infinite linear differential difference equations,which should be solved in a recursive manner.Then the exact solution is determined in the form of infinite terms series and by intercepting series an approximate solution is obtained.Numerical examples are employed to show the effectiveness of the proposed approach.

Remote-Controlled Ambidextrous Robot Hand Concept

In the development of robotic limbs, the side of members is of importance to define the shape of artificial limbs and the range of movements. It is mainly significant tbr biomedical applications concerning patients suffering arms or legs injuries, fn this paper, the concept of an ambidextrous design lbr robot hands is introduced. The fingers can curl in one xvay or another, to imitate either a right hand or a left hand. The advantages and inconveniences of different models have been investigated to optimise the range and the maximum force applied by fingers. Besides, a remote control interthce is integrated to the system, allowing both to send comrnands through internet and to display a video streaming of the ambidextrous hand as feedback. Therefore, a robotic prosthesis could be used for the first time in telerehabilitation. The main application areas targeted are physiotherapy alter strokes or management of phantom pains/br amputees by/earning to control the ambidextrous hand. A client application is also accessible on Facehook social network, making the robotic limb easily reachable for the patients. Additionally the ambidextrous hand can be used tbr robotics research as well as artistic performances.

Noncommutative Inspired Reissner-Nordstrm Black Holes in Large Extra Dimensions

Recently, a new noncommutative geometry inspired solution of the coupled Einstein Maxwell field equations including black holes in 4-dimension is found. In this paper, we generalize some aspects of this model to the Reissner Nordstrom （RN） like geometries with large extra dimensions. We discuss Hawking radiation process based on noncommutative inspired solutions. In this framework, existence of black hole remnant and possibility of its detection in LHC are investigated.

宋嘉定間乞頒賜程靈洗廟號封爵等文書研究

近從婺源朋友程曉民先生處得見宋嘉定十五、十六年乞頒賜南朝梁陳程靈洗廟號、封爵文書,原件應爲元代稿本或抄本,共二十六頁,由收藏者裱爲經折裝兩册,頁次不盡正確,内容亦有缺失,但這一前此未見得珍貴原始文書,爲研究宋代文獻及新安地區社會狀況和民衆心態等提供了新的材料。今謹就其内容性質及其作者、價值等問題論述如次。

Progress of Jinping Underground laboratory for Nuclear Astrophysics(JUNA)

Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of^(25)Mg(p,γ)^(26)Al,^(19)F(p,α)^(16)O,^(13)C(α,n)^(16)O and ^(12)C(α,γ)^(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.

Characteristics and sedimentary processes of lamina-controlled sand-particle imbricate structure in deposits on Lingshan Island, Qingdao, China

Imbricate structure is a common sedimentary structure and is well developed in sandy sediments. Here, we report a lamina- controlled fine-sand-particle imbricate structure in a set of very fine grained sedimentary rocks （fine sandstone, siltstone, and mudstone） at the Dockyard and Qianceng Cliff areas of Lingshan Island, Qingdao, Shandong, China. Sets of up to 300 laminae are found in stratigraphic profiles in these areas. The laminae are generally less than 1 mm thick, with most being 0.3-0.4 mm thick and the thinnest being 〈0.1 ram. The dip angle of the imbricate structure varies widely, between 0° and 90°, with an av- erage dip angle of about 40°-50°, which is higher than that of imbricate riverbed gravels （about 34°）. The dip angle is a func- tion of the shape and sorting of the particles, as well as the hydrodynamic conditions under which these fine-grained sediments were deposited. Several profiles show well-developed multiscale, soft-sediment deformation structures. Flute casts, load casts, and groove casts are also common. Fragments of carbon remains occur widely and commonly constitute stringers several mil- limeters thick and up to 10 cm long, together with fine clasts. Vitrain lenticles are also common. Based on the imbricate struc- ture of the Lingshan Island deposits, it is shown that in addition to paleocurrent analysis, the imbricate structure can be used to infer information about fluid properties, transport characteristics, and sedimentary processes of the depositional environment. A near-bottom underflow, either of authigenic origin or derived from cold river water in winter in a delta interdistributary bay or delta-front environment, is inferred to have provided the hydrodynamic setting in which this imbricate structure formed. The imbricate structure, together with other sedimentary structures and features, shows that the sedimentary rocks on Lingshan Is- land were deposited in an inland, shallow-water environment, such as a delta, and not in a deep-water or submarine continen- tal-slope environment.

A NEW PROCEDURE FOR TESTING NORMALITY BASED ON THE L_2 WASSERSTEIN DISTANCE

This paper proposes a new goodness-of-fit test for normality based on the L~ Wasserstein distance. The authors first construct a probability through the Bootstrap resampling. Although the probability is not distributed uniformly on the interval （0, 1） under the null hypothesis, it is shown that its distribution is free from the unknown parameters, which indicates that such a probability can be taken as the test statistic. It emerges from the simulation study of power that the new test is able to better discriminate between the normal distribution and those distributions with short tails. For such alternatives, it has a substantially better power than existing tests including the Anderson-Darling test and Shapiro-Wilk test, which are two of the best tests for normality. In addition, the sensitivity analysis of tests is also investigated in the presence of moderate perturbation, which shows that the new test is a rather robust test.

Design of an Enhanced Sensitivity FBG Strain Sensor and Application in Highway Bridge Engineering

The theoretical design method of enhanced sensitivity fiber grating （FBG） strain sensors was given, and moreover high qualified strain sensors were developed and fabricated, whose sensing properties were good for practical applications. The strain sensor with cylindrical shell encapsulation contained three tubular structures, due to the uneven surface structure, in the area of the strain concentration, improving the sensitivity. It could achieve the embedment strain measurement and surface measurement and had the advantages of the easy installation. The good agreement was obtained between the measurements and theoretical simulation results. After each calibration test, twenty-four FBG strain sensors and six FBG temperature compensation sensors have been installed on the undersurface of the box girder of Diaoshuiyan bridge in Yongtaiwen highway. Finally, we built up a long-term structure health system for the highway bridge.

Metabolic engineering of Streptomyces coelicolor for enhanced prodigiosins (RED) production

Bacterial prodigiosins are red-colored secondary metabolites with multiple activities,such as anticancer,antimalarial and immunosuppressive,which hold great potential for medical applications.In this study,dramatically enhanced prodigiosins(RED) production in Streptomyces coelicolor was achieved by combinatorial metabolic engineering,including inactivation of the repressor gene ohkA,deletion of the actinorhodin(ACT) and calcium-dependent antibiotic(CDA) biosynthetic gene clusters(BGCs) and multi-copy chromosomal integration of the RED BGC.The results showed that ohkA deletion led to a 1-fold increase of RED production over the wild-type strain M145.Then,the ACT and CDA BGCs were deleted successively based on the AohkA mutant(SBJ101).To achieve multi-copy RED BGC integration,artificial ΦC31 attB site(s) were inserted simultaneously at the position where the ACT and CDA BGCs were deleted.The resulting strains SBJ102(with a single deletion of the ACT BGC and insertion of one artificial attB site) and SBJ103(with the deletion of both BGCs and insertion of two artificial attB sites) produced 1.9-and 6-fold higher RED titers than M145,respectively.Finally,the entire RED BGC was introduced into mutants from SBJ101 to SBJ103,generating three mutants(from SBJ104 to SBJ106) with chromosomal integration of one to three copies of the RED BGC.The highest RED yield was from SBJ106,which produced a maximum level of 96.8 mg g^(-1) cell dry weight,showing a 12-fold increase relative to M145.Collectively,the metabolic engineering strategies employed in this study are very efficient for the construction of high prodigiosin-producing strains.

（non）Markovian process quantum fisher information quantum Cramer–Rao bound decoherence channels entangled states Heisenberg＇s limit phase sensitivity

In the present study, time evolution of quantum Cramer–Rao bound of entangled N00N state, as phase sensitivity, is determined by the aid of quantum estimation theory in the presence decoherence channels. Also, the dynamic quantum process as decoherence approach is characterized by quantum fisher information flow and entanglement amount in order to distinguish between Markovian and Non-Markovian process. The comparison between quantum fisher information and quantum fisher information flow assists to comprehend the phase sensitivity evolution corresponding to Non-Markovian and Markovian process. Furthermore, as result of backflow of information from the environment to system, the phase sensitivity corresponding memory effect of environment are revived after complete decay and increase in the few times.

SENSITIVITY OF DARCY'S LAW TO DISCONTINUITIES

The authors investigate the sensitivity of hydrostatic pressure of flows through porous media with respect to the position of the soil layers. Indeed, these induce discontinuities of the porosity which is a piecewise constant coefficient K of the partial differential equation satisfied by the pressure u and it leads to the computation of the derivative of u with respect to changes in position of discontinuity surface of K.The analysis relies on a mixed formulation of the problem. Preliminary numerical simulations are given to illustrate the theory. An application to a simple inverse problem is also given.