Features of Hollow RotorProgressing Cavity Pump(HRPCP)
(1) Keep the path forPCP well-flushing.Clean over the producing wells quickly without shutting off the wells. Heat loss is low while the efficiency is high.
This review mainly summarizes the latest developments in the internal flow field and external characteristics of centrifugal pumps.In particular,the latest findings of centrifugal pumps focused on turbulence and cavit...This review mainly summarizes the latest developments in the internal flow field and external characteristics of centrifugal pumps.In particular,the latest findings of centrifugal pumps focused on turbulence and cavitation models,flow visualization methods,and fault detection based on noise and vibration.The external characteristics,cavitation,and vibration of the centrifugal pump were extensively discussed.In addition,advanced multi-objective optimization methods for improving impeller’s efficiency and reducing net positive suction head(NPSH)were briefed.Although some progress was made in this field,there remain many unsolved problems,such as monitoring and modeling of cavitation,rotational stall phenomenon,and discrepancies between simulation and measurement.In the future,researchers are encouraged to employ multi-dimensional flow visualization technologies and high-performance computing facilities to advance existing understandings on these issues and create new research directions.展开更多
The anti-cavitation performance of a high-speed centrifugal pump with a splitter-bladed inducer is investigated under different flow rates and different inlet pressures. Simulations and external characteristics experi...The anti-cavitation performance of a high-speed centrifugal pump with a splitter-bladed inducer is investigated under different flow rates and different inlet pressures. Simulations and external characteristics experiments are carried out. Static pressure and the vapor volume fraction distributions on the inducer and the impeller of the pump under various operation conditions are obtained. The results show that the cavitation developments on the impeller and on the inducer with the flow rates are reverse, while the development of the inlet pressure on the inducer and the impeller is the same. Cavitation on the impeller increases with the increase of flow rates, and it extends to the near passages with rotating, while cavitation on the inducer is more complex than that on the impeller. Cavitation at the inlet of the inducer decreases with the increase of flow rates, while cavitation at the outlet of the inducer is opposite. The results also show that cavitation development on the impeller and on the inducer with the inlet pressure is the same. Cavitation both decreases with the increase of the inlet pressure at the same flow rate. Furthermore, asymmetric cavitation on the impeller and on the inducer is both observed. And the asymmetric degree of cavitation on the impeller is higher than that on the inducer.展开更多
This paper describes a new model for obtaining analytical solutions of peristaltic flow through eccentric annuli. A mathematical model of peristaltic pumping of a fluid mixture （as blood model） in a circular eccentr...This paper describes a new model for obtaining analytical solutions of peristaltic flow through eccentric annuli. A mathematical model of peristaltic pumping of a fluid mixture （as blood model） in a circular eccentric cylinders is presented and it is motivated due to the fact that thread injection is a promising method for placing medical implants within the human body with minimum surgical trauma. For the eccentric annuli, the inner cylinder is rigid and moving with a constant velocity V, and the outer one is hollow flexible cylinder that has a sinusoidal wave traveling down its wall. The coupled differential equations for both the fluid and the particle phases have been solved by using two methods and the expressions for the velocity distribution of fluid and particle phase, flow rate, pressure drop, friction forces at the inner and outer cylinders have been derived. The results obtained are discussed in brief. The significance of the particle concentration and the eccentricity parameter as well as the nature of the basic flow has been well explained.展开更多
文摘Features of Hollow RotorProgressing Cavity Pump(HRPCP)
(1) Keep the path forPCP well-flushing.Clean over the producing wells quickly without shutting off the wells. Heat loss is low while the efficiency is high.
基金the National Key R&D Program of China(No.2019YFB2004604)the National Natural Science Foundation of China(No.51821093)+2 种基金the Zhejiang Provincial Natural Science Foundation of China(No.LR19E050002)the Key R&D Program of Zhejiang Province(Nos.2018C01020 and 2018C01060)the Youth Funds of the State Key Laboratory of Fluid Power and Mechatronic Systems(No.SKLoFP_QN_1804),China。
文摘This review mainly summarizes the latest developments in the internal flow field and external characteristics of centrifugal pumps.In particular,the latest findings of centrifugal pumps focused on turbulence and cavitation models,flow visualization methods,and fault detection based on noise and vibration.The external characteristics,cavitation,and vibration of the centrifugal pump were extensively discussed.In addition,advanced multi-objective optimization methods for improving impeller’s efficiency and reducing net positive suction head(NPSH)were briefed.Although some progress was made in this field,there remain many unsolved problems,such as monitoring and modeling of cavitation,rotational stall phenomenon,and discrepancies between simulation and measurement.In the future,researchers are encouraged to employ multi-dimensional flow visualization technologies and high-performance computing facilities to advance existing understandings on these issues and create new research directions.
基金supported by the National Natural Science Foundation of China(Grant No.51406185)China Scholarship Council Project in 2012(Grant No.201208330325)+1 种基金the Third Level 151 Talent Project in Zhejiang Provincethe Professional Leader Leading Project in 2013(Grant No.lj2013005)
文摘The anti-cavitation performance of a high-speed centrifugal pump with a splitter-bladed inducer is investigated under different flow rates and different inlet pressures. Simulations and external characteristics experiments are carried out. Static pressure and the vapor volume fraction distributions on the inducer and the impeller of the pump under various operation conditions are obtained. The results show that the cavitation developments on the impeller and on the inducer with the flow rates are reverse, while the development of the inlet pressure on the inducer and the impeller is the same. Cavitation on the impeller increases with the increase of flow rates, and it extends to the near passages with rotating, while cavitation on the inducer is more complex than that on the impeller. Cavitation at the inlet of the inducer decreases with the increase of flow rates, while cavitation at the outlet of the inducer is opposite. The results also show that cavitation development on the impeller and on the inducer with the inlet pressure is the same. Cavitation both decreases with the increase of the inlet pressure at the same flow rate. Furthermore, asymmetric cavitation on the impeller and on the inducer is both observed. And the asymmetric degree of cavitation on the impeller is higher than that on the inducer.
文摘This paper describes a new model for obtaining analytical solutions of peristaltic flow through eccentric annuli. A mathematical model of peristaltic pumping of a fluid mixture （as blood model） in a circular eccentric cylinders is presented and it is motivated due to the fact that thread injection is a promising method for placing medical implants within the human body with minimum surgical trauma. For the eccentric annuli, the inner cylinder is rigid and moving with a constant velocity V, and the outer one is hollow flexible cylinder that has a sinusoidal wave traveling down its wall. The coupled differential equations for both the fluid and the particle phases have been solved by using two methods and the expressions for the velocity distribution of fluid and particle phase, flow rate, pressure drop, friction forces at the inner and outer cylinders have been derived. The results obtained are discussed in brief. The significance of the particle concentration and the eccentricity parameter as well as the nature of the basic flow has been well explained.
